Re: [hylafax-users] Error: Unable to open scheduler FIF0 & "kernel: tty_io.c process 561 (faxgetty) used obsolete

["S. Ancelot" <sancelot@online.fr>]

You must first be sure to know which device it is, you can use minicom
application, to try communicate with the modem first. and then, when you are
sure communication is established with modem, set it up with the right device
name.


Be careful, sometimes, few devices begin at 1 , not 0

bye
steph


Jay Ungab wrote:

> Hi,
>
>         ttyS0 is for serial connection device only that are directly
> connected to your server/machine. My setup, I have a digi board PCI/Xem with
> 8 port for modem connection.
>
> Regards
>
> Jay Ungab
> Dairy Farm Off-Shore Support Center
> 2/F, Bank of Philippine Islands Bldg., Muralla St.
> Intramuros, Manila, Philippines
> Telephone: +63 (2) 5288216
> Fax: +63 (2) 5288250
> Email: jungab@dairy-farm.com.ph
>
> -----Original Message-----
> From: S. Ancelot [mailto:sancelot@online.fr]
> Sent: Wednesday, October 17, 2001 3:59 PM
> To: Jay Ungab
> Cc: hylafax-users@hylafax.org
> Subject: Re: [hylafax-users] Error: Unable to open scheduler FIF0 &
> "kernel: tty_io.c process 561 (faxgetty) used obsolete
>
> replace ttyD0 with ttyS0
>
> ay Ungab wrote:
>
> > Hi All,
> >
> >         1. Does anyone encounter when try sending in a client/server to
> > another client server of hylafax error below?
> >
> >         460 Failed to submit job 45: Unable to open Scheduler FIFO: Device
> > not configured
> >
> >         I followed the section in Troubleshooting scheduler operation but
> no
> > success at all. I'm running TurboLinux 6.0 with kernel version 2.2.14-3
> and
> > hylafax version 4.1rc1 with a Digi Board PCI/Xem 8 ports. Your input are
> > really appreciated.
> >
> >         2. When I run faxgetty -D /dev/ttyD0, Im getting an error "kernel:
> > tty_io.c process 561 (faxgetty) used obsolete /dev/cud0 - update software
> to
> > use /dev/ttyS0
> >
> >         3. Do I need to upgrade the kernel to new version? or just the
> > device use by faxgetty? Can anyone pinpoint
> > where I can get the software for the block device.
> >
> >         Many thanks!
> >
> > Regards
> >
> > Jay Ungab
> > Dairy Farm Off-Shore Support Center
> > 2/F, Bank of Philippine Islands Bldg., Muralla St.
> > Intramuros, Manila, Philippines
> > Telephone: +63 (2) 5288216
> > Fax: +63 (2) 5288250
> > Email: jungab@dairy-farm.com.ph
> >
> >  <<Jay Ungab.vcf>>



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null