[hylafax-users] Call aborted sending a fax with WHFC application.

[Xeb <suport@esis.net>]

Hi, 
I'm using HylaFax v4.1+ on a RedHat 7.1 Server - the modem is a Multitech
Multisystem. 
I'm attempting to configure the machine to send out-going faxes with WinFlex
Client for Windows.
When I try to send a fax with WinFlex hylafax try to send it but it do a
communication error. See the follow log:
Oct 15 17:31:25.55: [ 9036]: --> [21:+FDIS:1,3,0,2,1,2,0,5]
Oct 15 17:31:25.55: [ 9036]: --> [2:OK]
Oct 15 17:31:25.55: [ 9036]: REMOTE best rate 9600 bit/s
Oct 15 17:31:25.55: [ 9036]: REMOTE max page width 1728 pixels in 215 mm
Oct 15 17:31:25.55: [ 9036]: REMOTE max unlimited page length
Oct 15 17:31:25.55: [ 9036]: REMOTE best vres 7.7 line/mm
Oct 15 17:31:25.55: [ 9036]: REMOTE best format 1-D MR
Oct 15 17:31:25.55: [ 9036]: REMOTE supports T.30 Annex C, half duplex ECM
Oct 15 17:31:25.55: [ 9036]: REMOTE best 20 ms/scanline
Oct 15 17:31:25.55: [ 9036]: USE 9600 bit/s
Oct 15 17:31:25.55: [ 9036]: USE 20 ms/scanline
Oct 15 17:31:25.55: [ 9036]: <-- [5:ATH0\r]
Oct 15 17:31:27.16: [ 9036]: --> [7:+FHNG:2]
Oct 15 17:31:27.16: [ 9036]: REMOTE HANGUP: Call aborted,  from +FK or <CAN>
(code 2)
Oct 15 17:31:27.80: [ 9036]: --> [2:OK]
Oct 15 17:31:27.80: [ 9036]: SESSION END

After, if I try to resend manaly (with sendfax command) the ps file created
in /var/spool/hylafax/docq it sends well to other fax.

Thanks for any help.

Xavier Vilanova.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null