Re: [hylafax-users] Connects but no fax

["Graeme Walker" <hylafax@walk.co.za>]

Hi

Tried Class 1 now I get the following, same seneraio, dialups, handshakes,
line drops

[root@fax1 root]# cat /var/spool/fax/log/c00000008
Oct 11 09:05:27.07: [ 5622]: SESSION BEGIN 00000008 27118861109
Oct 11 09:05:27.07: [ 5622]: HylaFAX (tm) Version 4.1
Oct 11 09:05:27.07: [ 5622]: SEND FAX: JOB 14 DEST 0118861109 COMMID
00000008
Oct 11 09:05:27.07: [ 5622]: DEVICE '/dev/ttyS0'
Oct 11 09:05:27.07: [ 5622]: DELAY 75 ms
Oct 11 09:05:27.15: [ 5622]: DELAY 2600 ms
Oct 11 09:05:29.75: [ 5622]: <-- [4:ATZ\r]
Oct 11 09:05:29.88: [ 5622]: --> [2:OK]
Oct 11 09:05:29.88: [ 5622]: <-- [5:ATE0\r]
Oct 11 09:05:30.01: [ 5622]: --> [4:ATE0]
Oct 11 09:05:30.01: [ 5622]: --> [2:OK]
Oct 11 09:05:30.01: [ 5622]: <-- [5:ATV1\r]
Oct 11 09:05:30.14: [ 5622]: --> [2:OK]
Oct 11 09:05:30.14: [ 5622]: <-- [7:ATQ0X4\r]
Oct 11 09:05:30.27: [ 5622]: --> [2:OK]
Oct 11 09:05:30.27: [ 5622]: <-- [7:ATS0=0\r]
Oct 11 09:05:30.40: [ 5622]: --> [2:OK]
Oct 11 09:05:30.40: [ 5622]: <-- [7:ATS8=2\r]
Oct 11 09:05:30.53: [ 5622]: --> [2:OK]
Oct 11 09:05:30.53: [ 5622]: <-- [8:ATS7=60\r]
Oct 11 09:05:30.67: [ 5622]: --> [2:OK]
Oct 11 09:05:30.67: [ 5622]: <-- [12:AT&H2&I2&R1\r]
Oct 11 09:05:30.81: [ 5622]: --> [2:OK]
Oct 11 09:05:30.81: [ 5622]: <-- [11:ATS13=1&D2\r]
Oct 11 09:05:30.95: [ 5622]: --> [2:OK]
Oct 11 09:05:30.95: [ 5622]: <-- [6:AT&C1\r]
Oct 11 09:05:31.08: [ 5622]: --> [2:OK]
Oct 11 09:05:31.08: [ 5622]: <-- [12:AT+FCLASS=1\r]
Oct 11 09:05:31.22: [ 5622]: --> [2:OK]
Oct 11 09:05:31.22: [ 5622]: <-- [12:AT+FCLASS=0\r]
Oct 11 09:05:31.36: [ 5622]: --> [2:OK]
Oct 11 09:05:31.36: [ 5622]: <-- [7:ATL0M1\r]
Oct 11 09:05:31.49: [ 5622]: --> [2:OK]
Oct 11 09:05:31.49: [ 5622]: <-- [12:AT+FCLASS=1\r]
Oct 11 09:05:31.73: [ 5622]: --> [2:OK]
Oct 11 09:05:31.73: [ 5622]: DIAL 0118861109
Oct 11 09:05:31.73: [ 5622]: <-- [15:ATDT0118861109\r]
Oct 11 09:05:41.00: [ 5622]: --> [7:CONNECT]
Oct 11 09:05:41.90: [ 5622]: --> [2:OK]
Oct 11 09:05:41.90: [ 5622]: REMOTE NSF "00 00 25 00 00 00 12 10 4D 02 00 58
00 2A B8 2C 6D"
Oct 11 09:05:41.90: [ 5622]: NSF remote fax equipment: Ricoh
Oct 11 09:05:41.90: [ 5622]: NSF remote station ID: "m,¸*"
Oct 11 09:05:41.90: [ 5622]: <-- [9:AT+FRH=3\r]
Oct 11 09:05:41.91: [ 5622]: --> [7:CONNECT]
Oct 11 09:05:42.62: [ 5622]: --> [2:OK]
Oct 11 09:05:42.62: [ 5622]: REMOTE NSF "00 00 25 01 44 45 54 49 4D 49 4C 20
50 55 4F 52 47 20 4B 33 59 38"
Oct 11 09:05:42.62: [ 5622]: NSF remote fax equipment: Ricoh
Oct 11 09:05:42.62: [ 5622]: NSF remote station ID: "8Y3K GROUP LIMITED"
Oct 11 09:05:42.62: [ 5622]: <-- [9:AT+FRH=3\r]
Oct 11 09:05:42.63: [ 5622]: --> [7:CONNECT]
Oct 11 09:05:43.31: [ 5622]: --> [2:OK]
Oct 11 09:05:43.31: [ 5622]: REMOTE CSI "0117874684"
Oct 11 09:05:43.31: [ 5622]: <-- [9:AT+FRH=3\r]
Oct 11 09:05:43.32: [ 5622]: --> [7:CONNECT]
Oct 11 09:05:43.66: [ 5622]: --> [2:OK]
Oct 11 09:05:43.66: [ 5622]: REMOTE best rate 14400 bit/s
Oct 11 09:05:43.66: [ 5622]: REMOTE max page width 1728 pixels in 215 mm
Oct 11 09:05:43.66: [ 5622]: REMOTE max unlimited page length
Oct 11 09:05:43.66: [ 5622]: REMOTE best vres 7.7 line/mm
Oct 11 09:05:43.66: [ 5622]: REMOTE best format 2-D MMR
Oct 11 09:05:43.66: [ 5622]: REMOTE supports T.30 Annex A, ECM
Oct 11 09:05:43.66: [ 5622]: REMOTE best 10 ms, 5 ms/scanline
Oct 11 09:05:43.66: [ 5622]: USE 14400 bit/s
Oct 11 09:05:43.66: [ 5622]: USE 10 ms, 5 ms/scanline
Oct 11 09:05:43.66: [ 5622]: <-- [9:AT+FTH=3\r]
Oct 11 09:05:43.85: [ 5622]: --> [7:CONNECT]
Oct 11 09:05:43.85: [ 5622]: <-- data [3]
Oct 11 09:05:43.85: [ 5622]: <-- data [2]
Oct 11 09:05:45.03: [ 5622]: --> [2:OK]
Oct 11 09:05:45.03: [ 5622]: <-- [5:ATH0\r]
Oct 11 09:05:45.26: [ 5622]: --> [2:OK]
Oct 11 09:05:45.26: [ 5622]: SESSION END
[root@fax1 root]#

----- Original Message -----
From: "Lee Howard" <faxguy@deanox.com>
To: "Graeme Walker" <hylafax@walk.co.za>; <hylafax-users@hylafax.org>
Sent: Wednesday, October 10, 2001 11:39 PM
Subject: Re: [hylafax-users] Connects but no fax


> At 11:19 PM 10/10/01 +0200, Graeme Walker wrote:
> >Hi
> >
> >I have Hylafax 4.1, preinstalled with Mandrake 8.1
> >I run the faxsetup and faxaddmodem and all is fine.
> >I can submit a job, it dials, handshakes and drops the line, never sends
the
> >fax, attached is from the log file.
>
> >Oct 10 11:16:06.13: [ 2914]: <-- [14:AT+FCLASS=2.0\r]
>
> Try Class 1.
>
> Lee
>



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null