[hylafax-users] Cannot send fax but ok receive

Hi all.
I have Freebsd 4.2, hylafax 4.1beta2 and IDC-2814BXL/VR faxmodem.
I receive fax OK. But cannot send fax. When I try sendfax xxxxxxxx /etc/group
I have warning: are you sure that this is a G3 fax file? Does't seem to
be.... Faxmashine answer for call, but dose not receivr fax.
In Faxlog file:
09/25 15:15:07 sendfax: experimental test release 1.1.22-Aug17
09/25 15:15:07 sending fax to 1115
09/25 15:15:07 checking /etc/group
09/25 15:15:07 aa1 mdm_send: 'ATV1Q0' -> OK
09/25 15:15:07 aa1 mdm_send: 'ATI'
09/25 15:15:07 aa1 Generic Rockwell modem (33600)
09/25 15:15:07 aa1 mdm_send: 'ATI3'
09/25 15:15:07 aa1 mdm_send: 'ATI4'
09/25 15:15:07 aa1 additional info: 'a007840284C6002F'
09/25 15:15:07 aa1 modem quirks: 0004
09/25 15:15:07 aa1 mdm_send: 'AT+FCLASS=2' -> OK
09/25 15:15:08 aa1 mdm_send: 'AT+FLID="00 00 000000"' -> OK
09/25 15:15:08 aa1 mdm_send: 'AT+FDCC=1,5,0,2,0,0,0,0' -> OK
09/25 15:15:08 aa1 mdm_send: 'AT+FBOR=0' -> OK
09/25 15:15:08 aa1 mdm_send: 'AT&H3' -> ERROR
09/25 15:15:08 aa1 cannot set 'modem_handshake'; ignored
09/25 15:15:08 aa1 fax_send: 'ATD1115'
09/25 15:15:08 aa1 fax_wait_for(OK)
09/25 15:15:20 aa1 fax_id: '+FCSI: " "'** found **
09/25 15:15:21 aa1 sendfax: IGNORE DCD (carrier) status
09/25 15:15:21 aa1 fax_send: 'AT+FDT'
09/25 15:15:21 aa1 fax_wait_for(CONNECT)
09/25 15:15:28 aa1 transmission par.: '+FDCS: 1,3,0,2,0,0,0,3'** found **
09/25 15:15:28 aa1 sending /etc/group...
09/25 15:15:28 aa1 file looks 'suspicious', buf=77 68 65 65...
09/25 15:15:28 aa1 page complete, 794 bytes sent
09/25 15:15:28 aa1 sending DLE ETX...
09/25 15:15:28 aa1 fax_wait_for(OK)** found **
09/25 15:15:29 aa1 fax_send: 'AT+FET=2'
09/25 15:15:29 aa1 fax_wait_for(OK)
09/25 15:15:32 aa1 page status: +FPTS: 1
09/25 15:15:34 aa1 connection hangup: '+FHNG: 0'** found **
09/25 15:15:36 aa1 fax_send: 'AT+FCLASS=0'
09/25 15:15:36 ##### success, phone="1115", dev=cuaa1, time=28s, pages=1(+0),
bytes=794, acct=""

In log file:
Aug 29 22:00:05.39: [ 1475]: SESSION BEGIN 00000038 380441115
Aug 29 22:00:05.39: [ 1475]: SEND FAX: JOB 3 DEST 1115 COMMID 00000038
Aug 29 22:00:05.39: [ 1475]: DELAY 2600 ms
Aug 29 22:00:07.99: [ 1475]: <-- [15:ATE0V1Q0S0=0H0\r]
Aug 29 22:00:08.01: [ 1475]: --> [2:OK]
Aug 29 22:00:08.01: [ 1475]: <-- [21:ATS8=2S7=60&K6&D2&C1\r]
Aug 29 22:00:08.03: [ 1475]: --> [2:OK]
Aug 29 22:00:08.03: [ 1475]: <-- [12:AT+FCLASS=2\r]
Aug 29 22:00:08.05: [ 1475]: --> [2:OK]
Aug 29 22:00:08.05: [ 1475]: <-- [10:AT+FTBC=0\r]
Aug 29 22:00:08.07: [ 1475]: --> [2:OK]
Aug 29 22:00:08.07: [ 1475]: <-- [10:AT+FBOR=0\r]
Aug 29 22:00:08.09: [ 1475]: --> [2:OK]
Aug 29 22:00:08.09: [ 1475]: <-- [13:AT+FPHCTO=30\r]
Aug 29 22:00:08.11: [ 1475]: --> [2:OK]
Aug 29 22:00:08.11: [ 1475]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Aug 29 22:00:08.13: [ 1475]: --> [2:OK]
Aug 29 22:00:08.13: [ 1475]: <-- [5:ATM0\r]
Aug 29 22:00:08.14: [ 1475]: --> [2:OK]
Aug 29 22:00:08.15: [ 1475]: <-- [12:AT+FCLASS=2\r]
Aug 29 22:00:08.26: [ 1475]: --> [2:OK]
Aug 29 22:00:08.26: [ 1475]: <-- [10:AT+FTBC=0\r]
Aug 29 22:00:08.38: [ 1475]: --> [2:OK]
Aug 29 22:00:08.38: [ 1475]: <-- [10:AT+FBOR=0\r]
Aug 29 22:00:08.50: [ 1475]: --> [2:OK]
Aug 29 22:00:08.50: [ 1475]: <-- [13:AT+FPHCTO=30\r]
Aug 29 22:00:08.62: [ 1475]: --> [2:OK]
Aug 29 22:00:08.62: [ 1475]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Aug 29 22:00:08.74: [ 1475]: --> [2:OK]
Aug 29 22:00:08.74: [ 1475]: <-- [24:AT+FLID="+380444903752"\r]
Aug 29 22:00:08.86: [ 1475]: --> [2:OK]
Aug 29 22:00:08.86: [ 1475]: DIAL 1115
Aug 29 22:00:08.87: [ 1475]: <-- [9:ATDT1115\r]
Aug 29 22:01:12.59: [ 1475]: --> [8:+FHNG: 1]
Aug 29 22:01:12.59: [ 1475]: REMOTE HANGUP: Ring detect without successful
handshake (code 1)
Aug 29 22:01:12.59: [ 1475]: SEND FAILED: Ring detect without successful
handshake
Aug 29 22:01:12.59: [ 1475]: <-- [5:ATH0\r]
Aug 29 22:01:14.02: [ 1475]: --> [2:OK]
Aug 29 22:01:14.02: [ 1475]: SESSION END

Sorry for my english.
Help pls.
Thanks.