[hylafax-users] Why only 20% of fax comes in?

[Robert <surtron@dowco.com>]

I just installed the latest hylafax from mandrake 7.2 everything seems to run 
ok except when I receive a fax I only get the first 20% of the page.  The 
receiving seems to cut out.  I have a modem with rockwell chipset.  Enclosed 
is a copy of one log file from one of the faxes received and also a received 
fax sample.

I sure hope that someone can help, thankyou

Robert
surtron@dowco.com
Sep 11 16:07:39.27: [  962]: SESSION BEGIN 00000005 16046045845372
Sep 11 16:07:39.27: [  962]: <-- [4:ATA\r]
Sep 11 16:07:42.56: [  962]: --> [3:FAX]
Sep 11 16:07:42.56: [  962]: ANSWER: FAX CONNECTION
Sep 11 16:07:42.56: [  962]: RECV FAX: begin
Sep 11 16:07:48.40: [  962]: --> [5:+FCON]
Sep 11 16:07:50.03: [  962]: --> [29:+FTSI: "    Analytic Systems"]
Sep 11 16:07:50.03: [  962]: REMOTE TSI "Analytic Systems"
Sep 11 16:07:50.44: [  962]: --> [22:+FDCS: 1,5,0,2,1,0,0,0]
Sep 11 16:07:50.44: [  962]: REMOTE wants 14400 bit/s
Sep 11 16:07:50.44: [  962]: REMOTE wants page width 1728 pixels in 215 mm
Sep 11 16:07:50.44: [  962]: REMOTE wants unlimited page length 
Sep 11 16:07:50.44: [  962]: REMOTE wants 7.7 line/mm
Sep 11 16:07:50.44: [  962]: REMOTE wants 2-D MR
Sep 11 16:07:50.44: [  962]: --> [2:OK]
Sep 11 16:07:50.44: [  962]: <-- [7:AT+FDR\r]
Sep 11 16:07:53.30: [  962]: --> [5:+FCFR]
Sep 11 16:07:55.15: [  962]: --> [22:+FDCS: 1,5,0,2,1,0,0,0]
Sep 11 16:07:55.15: [  962]: REMOTE wants 14400 bit/s
Sep 11 16:07:55.15: [  962]: REMOTE wants page width 1728 pixels in 215 mm
Sep 11 16:07:55.15: [  962]: REMOTE wants unlimited page length 
Sep 11 16:07:55.15: [  962]: REMOTE wants 7.7 line/mm
Sep 11 16:07:55.15: [  962]: REMOTE wants 2-D MR
Sep 11 16:07:55.15: [  962]: --> [7:CONNECT]
Sep 11 16:07:55.15: [  962]: RECV: begin page
Sep 11 16:07:55.15: [  962]: RECV: send trigger 021
Sep 11 16:07:55.15: [  962]: <-- data [1]
Sep 11 16:08:05.02: [  962]: RECV: 160 total lines, 0 bad lines, 0 consecutive bad lines
Sep 11 16:08:05.02: [  962]: --> [17:+FPTS: 2,2219,0,0]
Sep 11 16:08:05.57: [  962]: --> [7:+FET: 2]
Sep 11 16:08:05.57: [  962]: RECV recv EOP (no more pages or documents)
Sep 11 16:08:05.68: [  962]: --> [2:OK]
Sep 11 16:08:05.68: [  962]: RECV send MCF (message confirmation)
Sep 11 16:08:05.68: [  962]: RECV FAX (00000005): from Analytic Systems, page 1 in 0:15, INF, 7.7 line/mm, 2-D MR
Sep 11 16:08:05.68: [  962]: RECV FAX (00000005): recvq/fax00004.tif from Analytic Systems, route to <unspecified>, 1 pages in 0:23
Sep 11 16:08:05.68: [  962]: <-- [7:AT+FDR\r]
Sep 11 16:08:09.06: [  962]: --> [29:+FTSI: "    Analytic Systems"]
Sep 11 16:08:09.06: [  962]: RECV FAX: bin/faxrcvd "recvq/fax00004.tif" "ttyS3" "00000005" ""
Sep 11 16:08:09.25: [  962]: RECV FAX: end
Sep 11 16:08:09.25: [  962]: SESSION END

fax file