hi,
i have problems with incomming faxes:
the tiffs are only 440-460 bytes.
thats a session log of an received fax.
is there any mistake ?
ciao bjoern
recvq/fax00010.tif:
Sender: 0049 375 XXXXXXX
Pages: 1
Quality: Fine
Page: 1728 by 0
Received: 2001:09:11 11:34:17
TimeToRecv: 0:22
SignalRate: 14400 bit/s
DataFormat: 2-D MR
---- Transcript of session follows ----
Sep 11 11:34:01.72: [ 552]: SESSION BEGIN 00000020 493757883862
Sep 11 11:34:01.72: [ 552]: <-- [4:ATA\r]
Sep 11 11:34:04.29: [ 552]: --> [3:FAX]
Sep 11 11:34:04.29: [ 552]: ANSWER: FAX CONNECTION
Sep 11 11:34:04.29: [ 552]: RECV FAX: begin
Sep 11 11:34:10.71: [ 552]: --> [5:+FCON]
Sep 11 11:34:11.78: [ 552]: --> [29:+FTSI: " 0049 375 XXXXXXX"]
Sep 11 11:34:11.78: [ 552]: REMOTE TSI "0049 375 XXXXXXX"
Sep 11 11:34:12.20: [ 552]: --> [22:+FDCS: 1,5,0,0,1,0,0,1]
Sep 11 11:34:12.20: [ 552]: REMOTE want
s 14400 bit/s
Sep 11 11:34:12.20: [ 552]: REMOTE wants page width 1728 pixels in 215 mm
Sep 11 11:34:12.20: [ 552]: REMOTE wants A4 page length (297 mm)
Sep 11 11:34:12.20: [ 552]: REMOTE wants 7.7 line/mm
Sep 11 11:34:12.20: [ 552]: REMOTE wants 2-D MR
Sep 11 11:34:12.20: [ 552]: --> [2:OK]
Sep 11 11:34:12.20: [ 552]: <-- [7:AT+FDR\r]
Sep 11 11:34:15.21: [ 552]: --> [5:+FCFR]
Sep 11 11:34:17.81: [ 552]: --> [22:+FDCS: 1,5,0,0,1,0,0,1]
Sep 11 11:34:17.81: [ 552]: REMOTE wants 14400 bit/s
Sep 11 11:34:17.81: [ 552]: REMOTE wants page width 1728 pixels in 215 mm
Sep 11 11:34:17.81: [ 552]: REMOTE wants A4 page length (297 mm)
Sep 11 11:34:17.81: [ 552]: REMOTE wants 7.7 line/mm
Sep 11 11:34:17.81: [ 552]: REMOTE wants 2-D MR
Sep 11 11:34:17.81: [ 552]: --> [7:CONNECT]
Sep 11 11:34:17.81: [ 552]: RECV: begin page
Sep 11 11:34:17.81: [ 552]: RECV: send trigger 021
Sep 11 11:34:17.81: [ 552]: <-- data [1]
Sep 11 11:34:34.57: [ 552]: RECV: 1 tota
l lines, 0 bad lines, 0 consecutive bad lines
Sep 11 11:34:34.57: [ 552]: --> [17:+FPTS: 1,2219,0,0]
Sep 11 11:34:44.12: [ 552]: --> [7:+FET: 2]
Sep 11 11:34:44.12: [ 552]: RECV recv EOP (no more pages or documents)
Sep 11 11:34:44.12: [ 552]: --> [2:OK]
Sep 11 11:34:44.12: [ 552]: RECV send MCF (message confirmation)
Sep 11 11:34:44.12: [ 552]: RECV FAX (00000020): from 0049 375 XXXXXXX, page 1 in 0:32, A4, 7.7 line/mm, 2-D MR
Sep 11 11:34:44.12: [ 552]: RECV FAX (00000020): recvq/fax00010.tif from 0049 375 XXXXXXX, route to <unspecified>, 1 pages in 0:40
Sep 11 11:34:44.12: [ 552]: <-- [7:AT+FDR\r]
Sep 11 11:34:47.28: [ 552]: --> [8:+FHNG: 0]
Sep 11 11:34:47.28: [ 552]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Sep 11 11:34:47.28: [ 552]: RECV FAX: bin/faxrcvd "recvq/fax00010.tif" "ttyS2" "00000020" ""
