|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Cannot read tiff
Hi,
I have a problem receiving faxes from one location. All other tiff files are
ok.
We get a resultant 4 page "blank" tiff that cannot be opened
using a variety of image viewers.
Configuration HylaFAX 4.1 beta3
Rockwell 28800 based modem
RedHat 6.2
Log file for offending session...
Aug 31 12:03:51.80: [ 3916]: SESSION BEGIN 00000314 6463569273
Aug 31 12:03:51.82: [ 3916]: <-- [4:ATA\r]
Aug 31 12:04:00.44: [ 3916]: --> [5:+FCON]
Aug 31 12:04:00.45: [ 3916]: MODEM set baud rate: 19200 baud (flow control
unchanged)
Aug 31 12:04:00.45: [ 3916]: MODEM set baud rate: 19200 baud, input flow
XON/XOFF, output flow XON/XOFF
Aug 31 12:04:00.45: [ 3916]: ANSWER: FAX CONNECTION
Aug 31 12:04:00.45: [ 3916]: STATE CHANGE: ANSWERING -> RECEIVING
Aug 31 12:04:00.45: [ 3916]: MODEM input buffering enabled
Aug 31 12:04:00.45: [ 3916]: RECV FAX: begin
Aug 31 12:04:02.04: [ 3916]: --> [29:+FTSI: " 095732360"]
Aug 31 12:04:02.04: [ 3916]: REMOTE TSI "095732360"
Aug 31 12:04:02.46: [ 3916]: --> [22:+FDCS: 1,3,2,2,0,0,0,0]
Aug 31 12:04:02.46: [ 3916]: REMOTE wants 9600 bit/s
Aug 31 12:04:02.46: [ 3916]: REMOTE wants page width 2432 pixels in 303 mm
Aug 31 12:04:02.46: [ 3916]: REMOTE wants unlimited page length
Aug 31 12:04:02.46: [ 3916]: REMOTE wants 7.7 line/mm
Aug 31 12:04:02.46: [ 3916]: REMOTE wants 1-D MR
Aug 31 12:04:02.57: [ 3916]: --> [2:OK]
Aug 31 12:04:02.59: [ 3916]: <-- [7:AT+FDR\r]
Aug 31 12:04:04.37: [ 3916]: --> [5:+FCFR]
Aug 31 12:04:06.68: [ 3916]: --> [22:+FDCS: 1,3,2,2,0,0,0,0]
Aug 31 12:04:06.68: [ 3916]: REMOTE wants 9600 bit/s
Aug 31 12:04:06.68: [ 3916]: REMOTE wants page width 2432 pixels in 303 mm
Aug 31 12:04:06.68: [ 3916]: REMOTE wants unlimited page length
Aug 31 12:04:06.68: [ 3916]: REMOTE wants 7.7 line/mm
Aug 31 12:04:06.68: [ 3916]: REMOTE wants 1-D MR
Aug 31 12:04:06.68: [ 3916]: --> [7:CONNECT]
Aug 31 12:04:06.68: [ 3916]: RECV: begin page
Aug 31 12:04:06.68: [ 3916]: MODEM set XON/XOFF/FLUSH: input ignored, output
generated
Aug 31 12:04:06.68: [ 3916]: RECV: send trigger 022
Aug 31 12:04:06.68: [ 3916]: <-- data [1]
Aug 31 12:04:06.90: [ 3916]: RECV/CQ: Bad 1D pixel count, row 0, got 1728,
expected 2432
Aug 31 12:04:06.90: [ 3916]: RECV/CQ: Bad 1D pixel count, row 1, got 1728,
expected 2432
Aug 31 12:04:06.90: [ 3916]: RECV/CQ: Bad 1D pixel count, row 2, got 1728,
expected 2432
Aug 31 12:04:06.90: [ 3916]: RECV/CQ: Bad 1D pixel count, row 3, got 1728,
expected 2432
Aug 31 12:04:06.90: [ 3916]: RECV/CQ: Bad 1D pixel count, row 4, got 1728,
expected 2432
Aug 31 12:04:07.01: [ 3916]: RECV/CQ: Bad 1D pixel count, row 5, got 1728,
expected 2432
Aug 31 12:04:07.01: [ 3916]: RECV/CQ: Bad 1D pixel count, row 6, got 1728,
expected 2432
Aug 31 12:04:07.12: [ 3916]: RECV/CQ: Bad 1D pixel count, row 7, got 1728,
expected 2432
Aug 31 12:04:07.23: [ 3916]: RECV/CQ: Bad 1D pixel count, row 8, got 1728,
expected 2432
Aug 31 12:04:07.34: [ 3916]: RECV/CQ: Bad 1D pixel count, row 9, got 1728,
expected 2432
Aug 31 12:04:07.34: [ 3916]: RECV/CQ: Bad 1D pixel count, row 10, got 1728,
expected 2432
Aug 31 12:04:07.45: [ 3916]: RECV/CQ: Bad 1D pixel count, row 11, got 1728,
expected 2432
Aug 31 12:04:07.56: [ 3916]: RECV/CQ: Bad 1D pixel count, row 12, got 1728,
expected 2432
Aug 31 12:04:07.67: [ 3916]: RECV/CQ: Bad 1D pixel count, row 13, got 1728,
expected 2432
Aug 31 12:04:07.78: [ 3916]: RECV/CQ: Bad 1D pixel count, row 14, got 1728,
expected 2432
.
.
Aug 31 12:04:51.72: [ 3916]: RECV/CQ: Bad 1D pixel count, row 2313, got 0,
expected 2432
Aug 31 12:04:52.11: [ 3916]: RECV/CQ: Bad 1D pixel count, row 2314, got 0,
expected 2432
Aug 31 12:04:52.11: [ 3916]: RECV/CQ: Bad 1D pixel count, row 2315, got 0,
expected 2432
Aug 31 12:04:52.11: [ 3916]: RECV/CQ: Bad 1D pixel count, row 2316, got 0,
expected 2432
Aug 31 12:04:52.11: [ 3916]: RECV/CQ: Bad 1D pixel count, row 2317, got 0,
expected 2432
Aug 31 12:04:52.11: [ 3916]: RECV/CQ: Adjusting for trailing noise (2318
run)
Aug 31 12:04:52.11: [ 3916]: RECV: 0 total lines, 0 bad lines, 0 consecutive
bad lines
Aug 31 12:04:52.11: [ 3916]: MODEM set XON/XOFF/DRAIN: input interpreted,
output disabled
Aug 31 12:04:52.11: [ 3916]: --> [17:+FPTS: 1,2219,0,0]
Aug 31 12:04:53.44: [ 3916]: --> [7:+FET: 0]
Aug 31 12:04:53.44: [ 3916]: RECV recv MPS (more pages, same document)
Aug 31 12:04:53.55: [ 3916]: --> [2:OK]
Aug 31 12:04:53.55: [ 3916]: RECV send MCF (message confirmation)
Aug 31 12:04:53.55: [ 3916]: RECV FAX (00000314): from 095732360, page 1 in
0:51, INF, 7.7 line/mm, 1-D MR, 9600 bit/s
Aug 31 12:04:53.55: [ 3916]: <-- [7:AT+FDR\r]
Aug 31 12:04:56.48: [ 3916]: --> [7:CONNECT]
Aug 31 12:04:56.48: [ 3916]: RECV: begin page
Aug 31 12:04:56.48: [ 3916]: MODEM set XON/XOFF/FLUSH: input ignored, output
generated
Aug 31 12:04:56.48: [ 3916]: RECV: send trigger 022
Aug 31 12:04:56.48: [ 3916]: <-- data [1]
Aug 31 12:04:56.70: [ 3916]: RECV/CQ: Bad 1D pixel count, row 0, got 1728,
expected 2432
Aug 31 12:04:56.70: [ 3916]: RECV/CQ: Bad 1D pixel count, row 1, got 1728,
expected 2432
Aug 31 12:04:56.70: [ 3916]: RECV/CQ: Bad 1D pixel count, row 2, got 1728,
expected 2432
Aug 31 12:04:56.70: [ 3916]: RECV/CQ: Bad 1D pixel count, row 3, got 1728,
expected 2432
.
.
.
and so on until I get this at the end of the log.
.
.
Aug 31 12:06:30.98: [ 3916]: RECV/CQ: Bad 1D pixel count, row 2316, got 0,
expected 2432
Aug 31 12:06:30.98: [ 3916]: RECV/CQ: Bad 1D pixel count, row 2317, got 0,
expected 2432
Aug 31 12:06:30.98: [ 3916]: RECV/CQ: Bad 1D pixel count, row 2318, got 0,
expected 2432
Aug 31 12:06:30.98: [ 3916]: RECV/CQ: Adjusting for trailing noise (2319
run)
Aug 31 12:06:30.98: [ 3916]: RECV: 0 total lines, 0 bad lines, 0 consecutive
bad lines
Aug 31 12:06:30.98: [ 3916]: MODEM set XON/XOFF/DRAIN: input interpreted,
output disabled
Aug 31 12:06:31.10: [ 3916]: --> [17:+FPTS: 1,2219,0,0]
Aug 31 12:06:32.43: [ 3916]: --> [7:+FET: 2]
Aug 31 12:06:32.43: [ 3916]: RECV recv EOP (no more pages or documents)
Aug 31 12:06:32.54: [ 3916]: --> [2:OK]
Aug 31 12:06:32.54: [ 3916]: RECV send MCF (message confirmation)
Aug 31 12:06:32.54: [ 3916]: RECV FAX (00000314): from 095732360, page 4 in
0:26, INF, 7.7 line/mm, 1-D MR, 9600 bit/s
Aug 31 12:06:32.54: [ 3916]: RECV FAX (00000314): recvq/fax00036.tif from
095732360, route to <unspecified>, 4 pages in 2:32
Aug 31 12:06:32.58: [ 3916]: <-- [7:AT+FDR\r]
Aug 31 12:06:35.56: [ 3916]: --> [8:+FHNG: 0]
Aug 31 12:06:35.56: [ 3916]: REMOTE HANGUP: Normal and proper end of
connection (code 0)
Aug 31 12:06:35.56: [ 3916]: RECV FAX: bin/faxrcvd "recvq/fax00036.tif"
"ttyS1" "00000314" ""
Aug 31 12:06:36.84: [ 3916]: RECV FAX: end
Aug 31 12:06:36.84: [ 3916]: SESSION END
The log file is 850+Kb so I have chopped this down for breavity.
I do not know what the fax machine / pc at the senders end is. I can however
find out if this would help.
Any ideas? Is this a setup issue / hardware issue / compatibility issue?
TIA
Warren Wagener
(Senior Computer Technician)
B&M For Everything Electrical
Warren@bandm.co.nz
Tel +64 6 356 4912
Fax +64 6 356 9273
www.bandm.co.nz
***************************************************
This email and any files sent with it are confidential and intended solely for the use
of the individual or entity to which they are addressed.
If you have received this message in error, please advise the sender.
This footnote also confirms that all e-mail messages and attachments sent to
or by the B&M Group are scanned for viruses for your safety by Mailscan..
www.mailscan.deerfield.com
*******************************************************************
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
