Re: [hylafax-users] faxgetty doesn't seem to remove lock on

[brian.moriarty@specialtyll.com]

Here is the receive log:

Aug 17 23:10:57.38: [ 1125]: SESSION BEGIN 00000020 14135344069
Aug 17 23:10:57.38: [ 1125]: <-- [4:ATA\r]
Aug 17 23:11:08.47: [ 1125]: --> [4:+FCO]
Aug 17 23:11:08.47: [ 1125]: ANSWER: FAX CONNECTION
Aug 17 23:11:08.47: [ 1125]: RECV FAX: begin
Aug 17 23:11:10.14: [ 1125]: --> [27:+FTI:"         14133234000"]
Aug 17 23:11:10.14: [ 1125]: REMOTE TSI "14133234000"
Aug 17 23:11:10.41: [ 1125]: --> [20:+FCS:0,3,0,2,0,0,0,5]
Aug 17 23:11:10.41: [ 1125]: REMOTE wants 9600 bit/s
Aug 17 23:11:10.41: [ 1125]: REMOTE wants page width 1728 pixels in 215 mm
Aug 17 23:11:10.41: [ 1125]: REMOTE wants unlimited page length
Aug 17 23:11:10.41: [ 1125]: REMOTE wants 3.85 line/mm
Aug 17 23:11:10.41: [ 1125]: REMOTE wants 1-D MR
Aug 17 23:11:10.53: [ 1125]: --> [2:OK]
Aug 17 23:11:10.53: [ 1125]: <-- [7:AT+FDR\r]
Aug 17 23:11:12.60: [ 1125]: --> [20:+FCS:0,3,0,2,0,0,0,5]
Aug 17 23:11:12.60: [ 1125]: REMOTE wants 9600 bit/s
Aug 17 23:11:12.60: [ 1125]: REMOTE wants page width 1728 pixels in 215 mm
Aug 17 23:11:12.60: [ 1125]: REMOTE wants unlimited page length
Aug 17 23:11:12.60: [ 1125]: REMOTE wants 3.85 line/mm
Aug 17 23:11:12.60: [ 1125]: REMOTE wants 1-D MR
Aug 17 23:11:14.82: [ 1125]: --> [7:CONNECT]
Aug 17 23:11:14.82: [ 1125]: RECV: begin page
Aug 17 23:11:14.82: [ 1125]: RECV: send trigger 022
Aug 17 23:11:14.82: [ 1125]: <-- data [1]
Aug 17 23:11:51.31: [ 1125]: RECV: 1073 total lines, 0 bad lines, 0
consecutive bad lines
Aug 17 23:11:51.31: [ 1125]: --> [17:+FPS:1,1081,0,0,0]
Aug 17 23:11:55.79: [ 1125]: --> [6:+FET:2]
Aug 17 23:11:55.79: [ 1125]: RECV recv EOP (no more pages or documents)
Aug 17 23:11:55.79: [ 1125]: --> [2:OK]
Aug 17 23:11:55.79: [ 1125]: RECV send MCF (message confirmation)
Aug 17 23:11:55.79: [ 1125]: RECV FAX (00000020): from 14133234000, page 1
in 0:45, INF, 3.85 line/mm, 1-D MR, 9600 bit/s
Aug 17 23:11:55.79: [ 1125]: RECV FAX (00000020): recvq/fax00019.tif from
14133234000, route to <unspecified>, 1 pages in 0:47
Aug 17 23:11:55.79: [ 1125]: <-- [7:AT+FDR\r]
Aug 17 23:11:58.74: [ 1125]: --> [7:+FHS:00]
Aug 17 23:11:58.74: [ 1125]: REMOTE HANGUP: Normal and proper end of
connection (code 0)
Aug 17 23:11:58.74: [ 1125]: RECV FAX: bin/faxrcvd "recvq/fax00019.tif"
"ttyS0" "00000020" ""
Aug 17 23:11:59.53: [ 1125]: RECV FAX: end
Aug 17 23:11:59.53: [ 1125]: SESSION END

-----Original Message-----
From: Lee Howard [mailto:faxguy@deanox.com]
Sent: Friday, August 17, 2001 11:07 PM
To: Brian Moriarty; hylafax-users@hylafax.org
Subject: Re: [hylafax-users] faxgetty doesn't seem to remove lock on


At 03:00 PM 8/18/01 -0500, brian.moriarty@specialtyll.com wrote:
>
>I am not sure what I am doing wrong here.
>
>I am running:
>        Redhat 7.1
>        Hylafax 4.1 (from the rpm hylafax-4.1-1rh7.i386.rpm)
>        libtiff 3.5.5-10
>
>I have a USR Courier v.Everything which I have tried rtscts and xonxoff.
>
>The modem receives the first fax fine, but the lock file isn't removed and
>faxgetty won't answer subsequent calls.

That last receive log would help. ;-)

Lee.








____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null