|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Can not initialize modem
> Hi Lee,
>
> Here's below the "config.ttyS0" of my modem. I hope this the files
> you are looking in my config of my modem.
> Below also the logs of probemodems. Thanks
>
> #
> # Generic Class 2 modem configuration.
> #
> # EDIT THIS CONFIGURATION TO REFLECT YOUR SETUP
> #
> CountryCode: 63
> AreaCode: 2
> FAXNumber: 5256152
> LongDistancePrefix: 0
> InternationalPrefix: 00
> DialStringRules: etc/dialrules
> ServerTracing: 0xFFF
> SessionTracing: 11
> RecvFileMode: 0600
> LogFileMode: 0600
> DeviceMode: 0600
> RingsBeforeAnswer: 1
> SpeakerVolume: off
> GettyArgs: "-h %l dx_%s"
> LocalIdentifier: "NothingSetup"
> TagLineFont: etc/lutRS18.pcf
> TagLineFormat: "From %%l|%c|Page %%P of %%T"
> QualifyTSI: etc/tsi
> NoCarrierRetrys: 5
> PercentGoodLines: 0
> MaxConsecutiveBadLines: 0
> MaxRecvPages: 25
> MaxDials: 3
> MaxTries: 3
> UUCPLockTimeout: 15
> #
> #
> # Modem-related stuff: should reflect modem command interface
> # and hardware connection/cabling (e.g. flow control).
> #
> ModemType: Class2 # use this to supply a hint
> ModemRate: 19200 # max rate for DCE-DTE
> communication
> ModemFlowControl: xonxoff # XON/XOFF flow control assumed
> ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
> ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier
> (or not)
> #
> # We normally append the "@" symbol to the dial string so that
> # the modem will wait 5 seconds before attempting to connect
> # and return result codes that distinguish between no carrier
> # and no answer. This makes it possible to avoid problems with
> # repeatedly dialing a number that doesn't have a fax machine
> # (kudos to Stuart Lynne for this trick.)
> #
> # NB: If you need to prefix phone numbers to get through a PBX,
> # put it in the ModemDialCmd; e.g. "DT9%s@".
> #
> ModemDialCmd: ATDT%s@ # T for tone dialing, @ for
> silence
> #
> # Other possible configuration stuff. The default strings are
> # shown below. Only those that are different from the defaults
> # need to be included in the configuration file.
> #
> ModemResetCmds: "" # stuff to do when modem is reset
> ModemAnswerCmd: ATA # use this to answer phone
> ModemNoFlowCmd: AT&K # disable flow control cmd
> ModemHardFlowCmd: AT&K3 # hardware flow control cmd
> ModemSoftFlowCmd: AT&K4 # software flow control cmd
> ModemNoAutoAnswerCmd: ATS0=0 # disable auto-answer
> #
> # Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH.
> # Note that we both turn the speaker on/off and set volume.
> #
> ModemSetVolumeCmd: "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
> ModemEchoOffCmd: ATE0 # disable command echo
> ModemVerboseResultsCmd: ATV1 # enable verbose command results
> ModemResultCodesCmd: ATQ0 # enable result codes
> ModemOnHookCmd: ATH0 # place phone on hook (hangup)
> ModemSoftResetCmd: ATZ # do soft reset of modem
> ModemWaitTimeCmd: ATS7=60 # wait 60 seconds for carrier
> ModemCommaPauseTimeCmd: ATS8=2 # comma pause time is 2 seconds
> ModemRecvFillOrder: LSB2MSB # bit order of received facsimile
> ModemSendFillOrder: LSB2MSB # bit order modem expects for
> transmit
> #
> # Configuration parameters for Class 2 modems.
> #
> Class2Cmd: AT+FCLASS=2 # command to enter class 2
> Class2BORCmd: AT+FBOR=0 # bit order for phase B/C/D
> (direct)
> Class2RELCmd: AT+FREL=1 # byte-align EOL codes on recv
> Class2CQCmd: "" # commands to enable copy quality
> proc.
> Class2AbortCmd: AT+FK # abort session command
> Class2CQQueryCmd: AT+FCQ=? # query for copy quality
> capabilities
> Class2DCCQueryCmd: AT+FDCC=? # query for modem capabilities
> Class2TBCCmd: AT+FTBC=0 # setup stream mode
> Class2CRCmd: AT+FCR=1 # enable capability to receive
> Class2PHCTOCmd: AT+FPHCTO=30 # set phase C timeout parameter
> Class2BUGCmd: AT+FBUG=1 # enable HDLC frame tracing
> Class2LIDCmd: AT+FLID # set local identifier command
> Class2DCCCmd: AT+FDCC # set modem capabilities command
> Class2DISCmd: AT+FDIS # set session parameters command
> Class2DDISCmd: "" # disable pre-dial DIS command
> hack
> Class2CIGCmd: AT+FCIG # set polling identifier command
> Class2PTSCmd: AT+FPTS # set post-page status command
> Class2SPLCmd: AT+FSPL # set polling indicator command
> #
> # If Class2RecvDataTrigger is not set, then it is set to DC1
> #
> Class2RecvDataTrigger: "" # character sent to modem to start
> recv
> Class2XmitWaitForXON: yes # if true, wait for XON before
> send
>
>
>
> ==========================================================================
> =================
> This is the log I got when running probemodem ttyS0.
>
> [root@puppy log]# probemodem ttyS0
>
> Now we are going to probe the tty port. This takes a few seconds,
> so be patient. Note that if you do not have the modem cabled to
> the port, or the modem is turned off, this may hang (just go and
> cable up the modem or turn it on, or whatever).
>
> Probing for best speed to talk to modem: 38400 OK.
> [1]+ Terminated ( trap 0 1 2 15; while true; do
> sleep 10; echo ""; echo "Hmm, something seems to be hung, check your
> modem eh?";
> done )
>
> This looks like a Class 1+2 modem.
>
> ATI0 RESULT = "OK" RESPONSE = "MT5600ZDX"
> ATI1 RESULT = "OK" RESPONSE = "116"
> ATI2 RESULT = "OK" RESPONSE = "OK"
> ATI3 RESULT = "OK" RESPONSE = "V2.300-V90_2M_DLS"
>
> Class 1 stuff...
>
> AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,2,1.0"
> AT+FCLASS? RESULT = "OK" RESPONSE = "0"
> AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK"
> AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK"
> AT+FCLASS? RESULT = "OK" RESPONSE = "1"
> AT+FJUNK=? RESULT = "ERROR" RESPONSE = "ERROR"
> AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR"
> AT+FAA=? RESULT = "OK" RESPONSE = "0,1"
> AT+FAA? RESULT = "OK" RESPONSE = "0"
> AT+FAE=? RESULT = "OK" RESPONSE = "0,1"
> AT+FAE? RESULT = "OK" RESPONSE = "0"
> AT+FTH=? RESULT = "OK" RESPONSE =
> "3,24,48,72,73,74,96,97,98,121,122,145,146"
> AT+FRH=? RESULT = "OK" RESPONSE =
> "3,24,48,72,73,74,96,97,98,121,122,145,146"
> AT+FTM=? RESULT = "OK" RESPONSE =
> "3,24,48,72,73,74,96,97,98,121,122,145,146"
> AT+FRM=? RESULT = "OK" RESPONSE =
> "3,24,48,72,73,74,96,97,98,121,122,145,146"
> AT+FTS=? RESULT = "OK" RESPONSE = "0-255"
> AT+FRS=? RESULT = "OK" RESPONSE = "0-255"
>
> Class 2 stuff...
>
> AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,2,1.0"
> AT+FCLASS? RESULT = "OK" RESPONSE = "1"
> AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK"
> AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK"
> AT+FCLASS=2 RESULT = "OK" RESPONSE = "OK"
> AT+FCLASS? RESULT = "OK" RESPONSE = "2"
> AT+FJUNK=? RESULT = "ERROR" RESPONSE = "ERROR"
> AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR"
> AT+FAA=? RESULT = "OK" RESPONSE = "0,1"
> AT+FAA? RESULT = "OK" RESPONSE = "0"
> AT+FAXERR=? RESULT = "OK" RESPONSE = "0-255"
> AT+FAXERR? RESULT = "OK" RESPONSE = "0"
> AT+FBADLIN=? RESULT = "OK" RESPONSE = "0"
> AT+FBADLIN? RESULT = "OK" RESPONSE = "0"
> AT+FBADMUL=? RESULT = "OK" RESPONSE = "0"
> AT+FBADMUL? RESULT = "OK" RESPONSE = "0"
> AT+FBOR=? RESULT = "OK" RESPONSE = "0-3"
> AT+FBOR? RESULT = "OK" RESPONSE = "0"
> AT+FBUF=? RESULT = "ERROR" RESPONSE = "ERROR"
> AT+FBUF? RESULT = "OK" RESPONSE = "16384,13107,3276,0"
> AT+FBUG=? RESULT = "OK" RESPONSE = "0"
> AT+FBUG? RESULT = "OK" RESPONSE = "0"
> AT+FCIG=? RESULT = "OK" RESPONSE = "(20)(32,33,35-96,123-126)"
> AT+FCIG? RESULT = "OK" RESPONSE = "OK"
> AT+FCQ=? RESULT = "OK" RESPONSE = "0"
> AT+FCQ? RESULT = "OK" RESPONSE = "0"
> AT+FCR=? RESULT = "OK" RESPONSE = "0,1"
> AT+FCR? RESULT = "OK" RESPONSE = "0"
> AT+FTBC=? RESULT = "OK" RESPONSE = "0"
> AT+FTBC? RESULT = "OK" RESPONSE = "0"
> AT+FDCC=? RESULT = "OK" RESPONSE =
> "(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)"
> AT+FDCC? RESULT = "OK" RESPONSE = "0,5,0,2,0,0,0,0"
> AT+FDCS=? RESULT = "OK" RESPONSE =
> "(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)"
> AT+FDCS? RESULT = "OK" RESPONSE = "0,0,0,0,0,0,0,0"
> AT+FDIS=? RESULT = "OK" RESPONSE =
> "(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)"
> AT+FDIS? RESULT = "OK" RESPONSE = "0,5,0,2,0,0,0,0"
> AT+FDT=? RESULT = "ERROR" RESPONSE = "ERROR"
> AT+FDT? RESULT = "ERROR" RESPONSE = "ERROR"
> AT+FECM=? RESULT = "OK" RESPONSE = "0"
> AT+FECM? RESULT = "OK" RESPONSE = "0"
> AT+FET=? RESULT = "ERROR" RESPONSE = "ERROR"
> AT+FET? RESULT = "ERROR" RESPONSE = "ERROR"
> AT+FLID=? RESULT = "OK" RESPONSE = "(20)(32,33,35-96,123-126)"
> AT+FLID? RESULT = "OK" RESPONSE = "OK"
> AT+FLNFC=? RESULT = "OK" RESPONSE = "0"
> AT+FLNFC? RESULT = "OK" RESPONSE = "0"
> AT+FLPL=? RESULT = "OK" RESPONSE = "0,1"
> AT+FLPL? RESULT = "OK" RESPONSE = "0"
> AT+FMDL? RESULT = "OK" RESPONSE = "MultiModemZDX"
> AT+FMFR? RESULT = "OK" RESPONSE = "Rockwell"
> AT+FMINSP=? RESULT = "OK" RESPONSE = "0"
> AT+FMINSP? RESULT = "OK" RESPONSE = "0"
> AT+FPHCTO=? RESULT = "OK" RESPONSE = "0-255"
> AT+FPHCTO? RESULT = "OK" RESPONSE = "30"
> AT+FPTS=? RESULT = "OK" RESPONSE = "1-5"
> AT+FPTS? RESULT = "OK" RESPONSE = "0"
> AT+FRBC=? RESULT = "OK" RESPONSE = "0"
> AT+FRBC? RESULT = "OK" RESPONSE = "0"
> AT+FREL=? RESULT = "OK" RESPONSE = "0"
> AT+FREL? RESULT = "OK" RESPONSE = "0"
> AT+FREV? RESULT = "OK" RESPONSE = "V2.300-V90_2M_DLS"
> AT+FSPL=? RESULT = "OK" RESPONSE = "0,1"
> AT+FSPL? RESULT = "OK" RESPONSE = "0"
> AT+FTBC=? RESULT = "OK" RESPONSE = "0"
> AT+FTBC? RESULT = "OK" RESPONSE = "0"
> AT+FVRFC=? RESULT = "OK" RESPONSE = "0"
> AT+FVRFC? RESULT = "OK" RESPONSE = "0"
> AT+FWDFC=? RESULT = "OK" RESPONSE = "0"
> AT+FWDFC? RESULT = "OK" RESPONSE = "0"
> AT+FK=? RESULT = "ERROR" RESPONSE = "ERROR"
>
>
> Regards
>
> Jay Ungab
> Dairy Farm Off-Shore Support Center
> 2/F, Bank of Philippine Islands Bldg., Muralla St.
> Intramuros, Manila, Philippines
> Telephone: +63 (2) 525 6152 Extension 229
> Fax: +63 (2) 5279622
> Email: jungab@dairy-farm.com.ph
>
>
>
>
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
