[hylafax-users] Problem with Hylafax and receiving Fax

["Philipp Obreiter" <pobreiter@microntec.de>]

Hello there,

 

if my Server try to receive a Fax, it generates the following error message:

 

An attempt to receive facsimile on modem failed because:

    Normal and proper end of connection

    ---- Transcript of session follows ----

Jul 24 00:01:12.47: [26408]: SESSION BEGIN 00000032 493458065119
Jul 24 00:01:12.47: [26408]: <-- [4:ATA\r]
Jul 24 00:01:20.82: [26408]: --> [5:+FCON]
Jul 24 00:01:20.82: [26408]: ANSWER: FAX CONNECTION
Jul 24 00:01:20.82: [26408]: MODEM input buffering enabled
Jul 24 00:01:20.82: [26408]: RECV FAX: begin
Jul 24 00:01:22.29: [26408]: --> [29:+FTSI: "WEB.DE FREEMAIL 0   "]
Jul 24 00:01:22.29: [26408]: REMOTE TSI "WEB.DE FREEMAIL 0"
Jul 24 00:01:22.57: [26408]: --> [22:+FDCS: 0,3,0,2,0,0,0,0]
Jul 24 00:01:22.57: [26408]: REMOTE wants 9600 bit/s
Jul 24 00:01:22.57: [26408]: REMOTE wants page width 1728 pixels in 215 mm
Jul 24 00:01:22.57: [26408]: REMOTE wants unlimited page length
Jul 24 00:01:22.57: [26408]: REMOTE wants 3.85 line/mm
Jul 24 00:01:22.57: [26408]: REMOTE wants 1-D MR
Jul 24 00:01:22.68: [26408]: --> [2:OK]
Jul 24 00:01:22.68: [26408]: <-- [7:AT+FDR\r]
Jul 24 00:01:24.30: [26408]: --> [5:+FCFR]
Jul 24 00:01:26.25: [26408]: --> [22:+FDCS: 0,3,0,2,0,0,0,0]
Jul 24 00:01:26.25: [26408]: REMOTE wants 9600 bit/s
Jul 24 00:01:26.25: [26408]: REMOTE wants page width 1728 pixels in 215 mm
Jul 24 00:01:26.25: [26408]: REMOTE wants unlimited page length
Jul 24 00:01:26.25: [26408]: REMOTE wants 3.85 line/mm
Jul 24 00:01:26.25: [26408]: REMOTE wants 1-D MR
Jul 24 00:01:26.25: [26408]: --> [7:CONNECT]
Jul 24 00:01:26.25: [26408]: RECV: begin page
Jul 24 00:01:26.25: [26408]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Jul 24 00:01:26.25: [26408]: RECV: send trigger 021
Jul 24 00:01:37.36: [26408]: RECV: 689 total lines, 684 bad lines, 542 consecutive bad lines
Jul 24 00:01:37.36: [26408]: MODEM set XON/XOFF/DRAIN: input interpreted, output disabled
Jul 24 00:01:37.36: [26408]: --> [17:+FPTS: 1,2219,0,0]
Jul 24 00:01:38.58: [26408]: --> [7:+FET: 2]
Jul 24 00:01:38.58: [26408]: RECV recv EOP (no more pages or documents)
Jul 24 00:01:38.69: [26408]: --> [2:OK]
Jul 24 00:01:38.69: [26408]: RECV: REJECT page quality, 0% good lines (95% required)
Jul 24 00:01:38.69: [26408]: RECV send RTN (retrain negative)
Jul 24 00:01:38.69: [26408]: <-- [10:AT+FPTS=2\r]
Jul 24 00:01:38.94: [26408]: --> [2:OK]
Jul 24 00:01:38.94: [26408]: <-- [7:AT+FDR\r]
Jul 24 00:01:41.83: [26408]: --> [8:+FHNG: 0]
Jul 24 00:01:41.83: [26408]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Jul 24 00:01:41.83: [26408]: RECV FAX (00000032): recvq/fax00006.tif from WEB.DE FREEMAIL 0, route to <unspecified>, 0 pages in 0:21
Jul 24 00:01:41.83: [26408]: RECV FAX: Normal and proper end of connection
Jul 24 00:01:41.83: [26408]: RECV FAX (00000032): session with WEB.DE FREEMAIL 0 terminated abnormally: Normal and proper end of connection
Jul 24 00:01:41.83: [26408]: RECV FAX: bin/faxrcvd "recvq/fax00006.tif" "modem" "00000032" "Normal and proper end of connection"

 

I donīt know, what i can do to fix this problem. I have a Lasat Unique 28.8 Modem. Please help ! ;-)

 

best regards

 

[Sorry for my bad English, i'm german...]

 

Philipp