Re: [hylafax-users] Bad faxrcvd parameters

["Josh Welch" <jwelch@buffalowildwings.com>]

What do you mean when you say it printed fine? Are you using a special script to send all faxes to a printer? Or did a client receive the fax and print it? I am a relative newcomer to Hylafax and I am not familiar with the Bad exit status message, but it seems really bizzarre that it would work manually but not automatically.

----- Original Message -----

From: Steve Walters

To: Josh Welch

Sent: Monday, June 25, 2001 4:45 PM

Subject: RE: [hylafax-users] Bad faxrcvd parameters

I have done this & the fax printed fine.  Thus, my suspicion that my input parameters must be incorrect.

-----Original Message-----
From: hylafax-users-bounce@hylafax.org [mailto:hylafax-users-bounce@hylafax.org]On Behalf Of Josh Welch
Sent: Monday, June 25, 2001 4:35 PM
To: Steve Walters; hylafax-users@hylafax.org
Subject: Re: [hylafax-users] Bad faxrcvd parameters

Additionally, if you run faxrcvd from the command line and pass it those options you will probably get some more constructive output.

 

Josh

----- Original Message -----

From: Steve Walters

To: hylafax-users@hylafax.org

Sent: Monday, June 25, 2001 2:36 PM

Subject: [hylafax-users] Bad faxrcvd parameters

Hello--

 

We are trying hylafax-4.1.b2_2 on FreeBSD v4.3 as a fax server.  I receives great, but the messages log states:

 

Jun 25 13:43:07 server01 FaxGetty[60848]: Bad exit status 077000 for "bin/faxrcvd "recvq/fax00002.tif" "ttyd0" "00000014" """

 

As you can see, the quotes are misplaced (the one after the first parameter "bin/faxrcvd is missing.  This creates empty quotes after the first parameter.

 

Is there any way to correct this in a config file, or is this in the source?

 

TIA for any help.

Steve Walters
Compass Engineering Group
7847 Tanners Gate Drive
Florence, KY  41042
Tel:    859.525.7899 x108
Fax:    859.525.7839
Cell:   513.378.0897