Re: [hylafax-users] COMREC error - addendum

["Josh Welch" <jwelch@buffalowildwings.com>]

Would moving from one phone line to another require any changes to my config
file? Or could there simply be some incompatibilities between the modem and
the type of phone line? I did not receive this or any other errors until I
moved this system to a fax line that comes off of our T1 circuit, and upon
returning it to a genuine analog line, no problems. Any suggestions for how
this could be handled?
Thanks

----- Original Message -----
From: "Lee Howard" <faxguy@deanox.com>
To: "Josh Welch" <jwelch@buffalowildwings.com>; "hylafax-users"
<hylafax-users@hylafax.org>
Sent: Monday, June 18, 2001 12:58 PM
Subject: Re: [hylafax-users] COMREC error - addendum


> At 12:33 PM 6/18/01 -0500, Josh Welch wrote:
> >I forgot to mention that this message was being generated every couple of
> >minutes for about 36 hours, then stopped. Some faxes were received
> >successfully before it began, and after it began. No intervention
occurred
> >to make the problem stop. All faxes that occurred were incoming, no
> >outbounds.
> >
> >The HylaFAX software thinks that there is a problem with the modem
> >on device /dev/ttyS0 that needs attention; repeated attempts to
> >initialize the modem have failed.
>
> Your config file is probably wrong... and if not then something is wrong
> with the modem or the way the modem is being handled by your system.
>
> Lee.
>
>
>
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
>



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null