[hylafax-users] hangup after FPTS

[LAZAR Imre <imre@transorg.hu>]

Hi HylaFAX users,

I use a a ZyXEL omni288 modem with class2.

I get that message, while I receive:
T.30 T2 timeout, expected page not received


Jun 13 14:23:03.62: [29663]: SESSION BEGIN 00053138 3613472020
Jun 13 14:23:03.62: [29663]: <-- [4:ATA\r]
Jun 13 14:23:16.60: [29663]: --> [5:+FCON]
Jun 13 14:23:16.60: [29663]: ANSWER: FAX CONNECTION
Jun 13 14:23:16.60: [29663]: RECV FAX: begin
Jun 13 14:23:20.50: [29663]: --> [29:+FTSI:"                    " ]
Jun 13 14:23:20.50: [29663]: REMOTE TSI ""
Jun 13 14:23:20.50: [29663]: --> [21:+FDCS:0,5,0,2,0,0,0,3]
Jun 13 14:23:20.50: [29663]: REMOTE wants 14400 bit/s
Jun 13 14:23:20.50: [29663]: REMOTE wants page width 1728 pixels in 215
mm
Jun 13 14:23:20.50: [29663]: REMOTE wants unlimited page length 
Jun 13 14:23:20.50: [29663]: REMOTE wants 3.85 line/mm
Jun 13 14:23:20.50: [29663]: REMOTE wants 1-D MR
Jun 13 14:23:20.50: [29663]: --> [2:OK]
Jun 13 14:23:20.51: [29663]: <-- [7:AT+FDR\r]
Jun 13 14:23:22.06: [29663]: --> [5:+FCFR]
Jun 13 14:23:22.06: [29663]: --> [21:+FDCS:0,5,0,2,0,0,0,3]
Jun 13 14:23:22.06: [29663]: REMOTE wants 14400 bit/s
Jun 13 14:23:22.06: [29663]: REMOTE wants page width 1728 pixels in 215
mm
Jun 13 14:23:22.06: [29663]: REMOTE wants unlimited page length 
Jun 13 14:23:22.06: [29663]: REMOTE wants 3.85 line/mm
Jun 13 14:23:22.06: [29663]: REMOTE wants 1-D MR
Jun 13 14:23:23.38: [29663]: --> [7:CONNECT]
Jun 13 14:23:23.38: [29663]: RECV: begin page
Jun 13 14:23:23.38: [29663]: RECV: send trigger 022
Jun 13 14:23:27.30: [29663]: RECV: 3673 bytes of data, 258 total lines
Jun 13 14:23:27.30: [29663]: --> [17:+FPTS:1,259,0,0,0]
^^^^
I don't understand the line above.
In my documentation the FPTS=n uses only one parameter, not 5.



Jun 13 14:23:37.34: [29663]: --> [8:+FHNG:73]
Jun 13 14:23:37.34: [29663]: REMOTE HANGUP: T.30 T2 timeout, expected
page not received (code 73)
Jun 13 14:23:37.34: [29663]: --> [2:OK]
Jun 13 14:23:37.35: [29663]: RECV FAX (00053138): recvq/fax17836.tif
from , route to <unspecified>, 0 pages in 0:21
Jun 13 14:23:37.35: [29663]: RECV FAX: T.30 T2 timeout, expected page
not received
Jun 13 14:23:37.35: [29663]: RECV FAX (00053138): session with 
terminated abnormally: T.30 T2 timeout, expected page not received
Jun 13 14:23:37.35: [29663]: RECV FAX: bin/faxrcvd "recvq/fax17836.tif"
"ttyM2" "00053138" "T.30 T2 timeout, expected page not received"
^^^^
After that, the HylaFAX deleted the file fax17836.tif.
But why? I think the fax came to my host correctly, the only problem was
with the postpage response.

Imre.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null