Re: [hylafax-users] USR Modem hangs

[Dave Wreski <dave@guardiandigital.com>]

> That's the *syslog*.  What we need is the *session* log, which I think
> you'll find in log/00000368, or something similar.

Ah, right. You must mean that 127 megabyte file, compared to the rest
that are 6k. Heh. The relevant points:

Jun 07 15:21:31.88: [ 1076]: --> [7:CONNECT]
Jun 07 15:21:33.44: [ 1076]: RECV: TCF 2813 bytes, 3% non-zero, 2702
zero-run
Jun 07 15:21:33.45: [ 1076]: --> [10:NO CARRIER]
Jun 07 15:21:33.45: [ 1076]: DELAY 75 ms
Jun 07 15:21:33.53: [ 1076]: <-- [9:AT+FTH=3\r]
Jun 07 15:21:33.72: [ 1076]: --> [7:CONNECT]
Jun 07 15:21:33.72: [ 1076]: <-- data [3]
Jun 07 15:21:33.72: [ 1076]: <-- data [2]
Jun 07 15:21:34.90: [ 1076]: --> [2:OK]
Jun 07 15:21:34.90: [ 1076]: TRAINING succeeded
Jun 07 15:21:34.90: [ 1076]: <-- [11:AT+FRM=146\r]
Jun 07 15:21:35.53: [ 1076]: --> [7:CONNECT]
Jun 07 15:21:35.53: [ 1076]: RECV: begin page

Jun 07 15:21:52.58: [ 1076]: RECV FAX (00000368): from 1201 796 8003, page
1 in 0:18, INF, 3.85 line/mm, 2-D MR, 14400 bit/s

Jun 07 15:22:05.55: [ 1076]: RECV send MCF (message confirmation)
Jun 07 15:22:05.55: [ 1076]: RECV FAX (00000368): from 1201 796 8003, page
2 in 0:13, INF, 3.85 line/mm, 2-D MR, 14400 bit/s
Jun 07 15:22:05.55: [ 1076]: RECV FAX (00000368): recvq/fax00338.tif from
1201 796 8003, route to <unspecified>, 2 pages in 0:48
Jun 07 15:22:05.56: [ 1076]: <-- [9:AT+FRH=3\r]
Jun 07 15:22:08.84: [ 1076]: --> [10:NO CARRIER]
Jun 07 15:22:08.84: [ 1076]: MODEM No carrier

It then repeats this pattern for the next 100 or so megs:

Jun 07 15:22:08.84: [ 1076]: <-- [9:AT+FRH=3\r]
Jun 07 15:22:08.85: [ 1076]: --> [10:NO CARRIER]
Jun 07 15:22:08.85: [ 1076]: MODEM No carrier

Thanks,
Dave






____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null