|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] FW: Problem with sending Fax
Hello again
Here is a logfile where the problem occours.
SuSE 7.1
Hylafax v 4.1beta3 CVS 11.05.2001
Modem is a USR 5630 external Fax 56k
It works in class 1
> Jun 06 15:15:58.81: [12608]: SEND FAX: JOB 723 DEST 0796183440 COMMID
> 00002608 Jun 06 15:15:58.81: [12608]: MODEM set DTR OFF
> Jun 06 15:15:58.81: [12608]: DELAY 2600 ms
> Jun 06 15:16:01.41: [12608]: MODEM set DTR ON
> Jun 06 15:16:01.41: [12608]: MODEM set baud rate: 38400 baud, input flow
> XON/XOFF, output flow XON/XOFF
> Jun 06 15:16:01.41: [12608]: MODEM flush i/o
> Jun 06 15:16:01.41: [12608]: <-- [4:ATZ\r]
> Jun 06 15:16:01.55: [12608]: --> [2:OK]
> Jun 06 15:16:01.55: [12608]: <-- [17:ATE0V1Q0X4S0=0H0\r]
> Jun 06 15:16:01.69: [12608]: --> [16:ATE0V1Q0X4S0=0H0]
> Jun 06 15:16:01.69: [12608]: --> [2:OK]
> Jun 06 15:16:01.69: [12608]: <-- [32:ATS8=2S7=60&H2&I2&R1S13=1&D2&C1\r]
> Jun 06 15:16:01.83: [12608]: --> [2:OK]
> Jun 06 15:16:01.83: [12608]: <-- [12:AT+FCLASS=1\r]
> Jun 06 15:16:01.97: [12608]: --> [2:OK]
> Jun 06 15:16:01.97: [12608]: <-- [12:AT+FCLASS=0\r]
> Jun 06 15:16:02.11: [12608]: --> [2:OK]
> Jun 06 15:16:02.11: [12608]: <-- [7:ATL3M1\r]
> Jun 06 15:16:02.25: [12608]: --> [2:OK]
> Jun 06 15:16:02.25: [12608]: STATE CHANGE: RUNNING -> SENDING
> Jun 06 15:16:02.25: [12608]: MODEM input buffering enabled
> Jun 06 15:16:02.25: [12608]: <-- [12:AT+FCLASS=1\r]
> Jun 06 15:16:02.49: [12608]: --> [2:OK]
> Jun 06 15:16:02.49: [12608]: MODEM set XON/XOFF/FLUSH: input ignored,
output
> disabled
> Jun 06 15:16:02.49: [12608]: DIAL 0796183440
> Jun 06 15:16:02.49: [12608]: <-- [19:ATX3DT0W0796183440\r]
> Jun 06 15:17:03.51: [12608]: --> [10:NO CARRIER]
> Jun 06 15:17:03.53: [12608]: SEND FAILED: No carrier detected
> Jun 06 15:17:03.53: [12608]: <-- [5:ATH0\r]
> Jun 06 15:17:03.77: [12608]: --> [2:OK]
> Jun 06 15:17:03.77: [12608]: MODEM set DTR OFF
> Jun 06 15:17:03.77: [12608]: STATE CHANGE: SENDING -> MODEMWAIT (timeout
5)
> Jun 06 15:17:03.77: [12608]: SESSION END
>
> Noch was ist mir gerade aufgefallen, normalerweise wird ja bei "no
> carrier detected" 12 mal ( laut config ) versucht neu zu senden diese
> Faxe werden aber nach dem 2. Versuch in die Donequeue geschoben.
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
