[hylafax-users] SEND FAILED: Can not setup modem

[Alessandro Coppelli <Alessandro.Coppelli@dsea.unipi.it>]

Hi to all.
I'm sorry but I would resolv this problem:


  This is my question

>Hi to all.
>
>I have installed in Solaris2.5 Hylafax 4.1beta3 and one modem
>USRobotics.
>
>After the installation and configuration when I try to send fax  ( with

>sendfax command ) I get
>
>this error :
>
>MODEM USROBOTICS SPORTSTER VOICE 33600 FAX REV 2.0 3361
>SEND FAX: JOB 7 DEST 0,01132476591  COMMID 0000000025
>SEND FAILED: can not setup modem.
>
>I try to setup modem with a lot of configutation files.
>I have change the cable between modem and Workstation.
>Where is the error ?
>Is in configuration file ?
>Or where ?

I have get this answer ( thank you Lee )

--------
HylaFAX bug.  Go back to the default config file for the USR modem
(re-run
faxaddmodem, choose Class 1).  You'll need to apply the patch on:

http://bugs.hylafax.org/bugzilla/show_bug.cgi?id=130

recompile, reinstall, and retry it.
---------------------


but in   the debug session there is
"  MODEM initial push zsunbuf failed " not "Modem timeout " .
It is same kind of error ?

Alessandro




==================DEBUG SESSION ==================
May 23 10:13:40 ultra HylaFAX[17893]: Filesystem has SysV-style file
creation semantics.
May 23 10:13:40 ultra FaxQueuer[17803]: SUBMIT JOB 8
May 23 10:13:42 ultra FaxSend[17900]: MODEM set DTR OFF
May 23 10:13:42 ultra FaxSend[17900]: DELAY 2600 ms
May 23 10:13:45 ultra FaxSend[17900]: MODEM set DTR ON
May 23 10:13:48 ultra FaxSend[17900]: MODEM set baud rate: 19200 baud,
input flow XON/XOFF, output flow XON/XOFF
May 23 10:13:48 ultra FaxSend[17900]: MODEM flush i/o
May 23 10:13:48 ultra FaxSend[17900]: <-- [4:ATZ\r]
May 23 10:13:48 ultra FaxSend[17900]: --> [2:OK]
May 23 10:13:48 ultra FaxSend[17900]: <-- [15:ATE0V1Q0S0=0H0\r]
May 23 10:13:48 ultra FaxSend[17900]: --> [14:ATE0V1Q0S0=0H0]
May 23 10:13:48 ultra FaxSend[17900]: --> [2:OK]
May 23 10:13:48 ultra FaxSend[17900]: <-- [12:ATS8=2S7=60\r]
May 23 10:13:48 ultra FaxSend[17900]: --> [2:OK]
May 23 10:13:48 ultra FaxSend[17900]: <-- [12:AT+FCLASS=?\r]
May 23 10:13:49 ultra FaxSend[17900]: --> [7:0,1,2.0]
May 23 10:13:49 ultra FaxSend[17900]: --> [2:OK]
May 23 10:13:49 ultra FaxSend[17900]: MODEM Supports "Data"
May 23 10:13:49 ultra FaxSend[17900]: MODEM Supports "Class 1"
May 23 10:13:49 ultra FaxSend[17900]: MODEM Supports "Class 2.0"
May 23 10:13:49 ultra FaxSend[17900]: <-- [12:AT+FCLASS=1\r]
May 23 10:13:49 ultra FaxSend[17900]: --> [2:OK]
May 23 10:13:49 ultra FaxSend[17900]: <-- [5:ATI3\r]
May 23 10:13:49 ultra FaxSend[17900]: --> [45:USRobotics Sportster Voice
33600 Fax Rev. 2.0]
May 23 10:13:49 ultra FaxSend[17900]: --> [2:OK]
May 23 10:13:49 ultra FaxSend[17900]: MODEM: Mfr USRobotics Sportster
Voice 33600 Fax Rev. 2.0
May 23 10:13:49 ultra FaxSend[17900]: <-- [5:ATI0\r]
May 23 10:13:49 ultra FaxSend[17900]: --> [4:3361]
May 23 10:13:49 ultra FaxSend[17900]: --> [2:OK]
May 23 10:13:49 ultra FaxSend[17900]: MODEM: Model 3361
May 23 10:13:49 ultra FaxSend[17900]: <-- [9:AT+FTM=?\r]
May 23 10:13:50 ultra FaxSend[17900]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
May 23 10:13:50 ultra FaxSend[17900]: --> [2:OK]
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports 3.85 line/mm
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports 7.7 line/mm
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports 2400 bit/s
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports 4800 bit/s
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports 7200 bit/s
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports 9600 bit/s
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports 12000 bit/s
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports 14400 bit/s
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports page width 1728
pixels in 215 mm
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports page width 2048
pixels in 255 mm
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports page width 2432
pixels in 303 mm
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports A4 page length (297
mm)
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports B4 page length (364
mm)
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports unlimited page
length
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports 1-D MR
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports 2-D MR
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports 0 ms/scanline
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports 5 ms/scanline
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports 10 ms, 5
ms/scanline
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports 10 ms/scanline
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports 20 ms, 10
ms/scanline
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports 20 ms/scanline
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports 40 ms, 20
ms/scanline
May 23 10:13:50 ultra FaxSend[17900]: MODEM Supports 40 ms/scanline
May 23 10:13:50 ultra FaxSend[17900]: <-- [9:AT+FRM=?\r]
May 23 10:13:50 ultra FaxSend[17900]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
May 23 10:13:50 ultra FaxSend[17900]: --> [2:OK]
May 23 10:13:50 ultra FaxSend[17900]: <-- [12:AT+FCLASS=1\r]
May 23 10:13:50 ultra FaxSend[17900]: --> [2:OK]
May 23 10:13:50 ultra FaxSend[17900]: MODEM USROBOTICS SPORTSTER VOICE
33600 FAX REV. 2.0 3361/
May 23 10:13:50 ultra FaxSend[17900]: <-- [5:ATM0\r]
May 23 10:13:51 ultra FaxSend[17900]: --> [2:OK]
May 23 10:13:51 ultra FaxSend[17900]: STATE CHANGE: BASE -> RUNNING
May 23 10:13:51 ultra FaxSend[17900]: MODEM input buffering disabled
May 23 10:13:51 ultra FaxSend[17900]: MODEM initial push zsunbuf failed
May 23 10:13:51 ultra FaxSend[17900]: SEND FAX: JOB 8 DEST 0,050565355
COMMID 00000060
May 23 10:14:02 ultra FaxSend[17900]: SEND FAILED: Can not setup modem





____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null