Re: [hylafax-users] fax recv error

[Lee Howard <faxguy@deanox.com>]

At 12:32 AM 5/18/01 -0700, Arvind Sharma wrote:
>Hi,
>    I have read hylafax.org/howto but my problem is
>that my fax server is connected to an extension so if
>someone has to send me a fax he has to dial my number
>5971717 and then switch to the extension 1044. I tried
>dialing this number from a fax machine and then
>switched the call to extension to which modem is
>connected. modem has picked up the call but fax was
>not received. the logfile generated is attached
>can someone suggest me a solution

May 18 12:34:45.66: [  592]: SESSION BEGIN 00000008 91225971717
May 18
12:34:45.66: [  592]: <-- [4:ATA\r]
May 18 12:35:54.69: [  592]: -->
[4:DATA]
May 18 12:35:54.69: [  592]: --> [13:CONNECT 38400]
May 18
12:35:54.69: [  592]: ANSWER: DATA CONNECTION
May 18 12:35:54.69: [  592]:
GETTY: START "/sbin/getty -h ttyS0 dx_38400", pid 772
May 18 12:35:54.71: [
 592]: GETTY: exit status 0400
May 18 12:35:54.71: [  592]: SESSION END

You can see that faxgetty passed the call off to getty as a DATA call and
not a FAX call.  My recommendation would be to disable Adaptive Answer.
I.e., put:

AdaptiveAnswer: no
ModemSetupAACmd: AT

in your config file(s) and remove any Adaptive Answer settings from your
config file.

Lee



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null