[hylafax-users] RSPREC error

[RODRIGUEZ Xavier <Xavier.RODRIGUEZ@gpe-eda.com>]

I have tried to send a fax but i always have a RSPREC error ...

 

Have you an idea ???

 

Xavier RODRIGUEZ

 

 

 

Apr 23 12:42:14.17: [25386]: <-- [15:AT+FNR=1,1,1,0\r]
Apr 23 12:42:14.41: [25386]: --> [2:OK]
Apr 23 12:42:14.41: [25386]: <-- [9:AT+FIE=0\r]
Apr 23 12:42:14.65: [25386]: --> [2:OK]
Apr 23 12:42:14.65: [25386]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Apr 23 12:42:14.90: [25386]: --> [2:OK]
Apr 23 12:42:14.90: [25386]: <-- [20:AT+FLI="Groupe EDA"\r]
Apr 23 12:42:15.15: [25386]: --> [2:OK]
Apr 23 12:42:15.15: [25386]: DIAL 0160950590
Apr 23 12:42:15.15: [25386]: <-- [17:ATDT00160950590@\r]
Apr 23 12:42:58.37: [25386]: --> [4:+FCO]
Apr 23 12:43:00.99: [25386]: --> [27:+FCI:"0160950590          "]
Apr 23 12:43:00.99: [25386]: REMOTE CSI "0160950590"
Apr 23 12:43:00.99: [25386]: --> [20:+FIS:1,3,0,2,1,0,0,2]
Apr 23 12:43:00.99: [25386]: --> [2:OK]
Apr 23 12:43:00.99: [25386]: REMOTE best rate 9600 bit/s
Apr 23 12:43:00.99: [25386]: REMOTE max page width 1728 pixels in 215 mm
Apr 23 12:43:00.99: [25386]: REMOTE max unlimited page length
Apr 23 12:43:00.99: [25386]: REMOTE best vres 7.7 line/mm
Apr 23 12:43:00.99: [25386]: REMOTE best format 2-D MR
Apr 23 12:43:00.99: [25386]: REMOTE best 10 ms, 5 ms/scanline
Apr 23 12:43:00.99: [25386]: USE 9600 bit/s
Apr 23 12:43:00.99: [25386]: USE 10 ms, 5 ms/scanline
Apr 23 12:43:00.99: [25386]: SEND file "docq/doc53.ps;00"
Apr 23 12:43:00.99: [25386]: USE page width 1728 pixels in 215 mm
Apr 23 12:43:00.99: [25386]: USE unlimited page length
Apr 23 12:43:00.99: [25386]: USE 3.85 line/mm
Apr 23 12:43:00.99: [25386]: USE 1-D MR
Apr 23 12:43:00.99: [25386]: <-- [23:AT+FIS=0,3,0,2,0,0,0,2\r]
Apr 23 12:43:01.24: [25386]: --> [2:OK]
Apr 23 12:43:01.24: [25386]: <-- [7:AT+FDT\r]
Apr 23 12:43:01.52: [25386]: --> [20:+FCS:0,3,0,2,0,0,0,2]
Apr 23 12:43:07.16: [25386]: --> [7:CONNECT]
Apr 23 12:43:07.16: [25386]: SEND begin page
Apr 23 12:43:26.91: [25386]: SENT 26292 bytes of data
Apr 23 12:43:26.91: [25386]: SEND 1D RTC
Apr 23 12:43:26.91: [25386]: SEND end page
Apr 23 12:43:26.91: [25386]: SEND send EOP (no more pages or documents)
Apr 23 12:43:40.04: [25386]: --> [7:+FHS:51]
Apr 23 12:43:40.04: [25386]: REMOTE HANGUP: RSPREC error/got DCN (code 51)
Apr 23 12:43:40.04: [25386]: <-- [5:ATH0\r]
Apr 23 12:43:40.17: [25386]: --> [2:OK]
Apr 23 12:43:40.17: [25386]: SESSION END