Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Bad 1D/2D pixel counts and invalid code words UPDATE




Just some guesses from me: By default hylafax writes badly endcoded tiff files
(if there are transmission problems and no error correction is active)
Maybe your tiff file has errors which lead to the hang of the program you use
to process it.


in my private archive there is this mail (there is more in the archives but
www.hylafax.org is down currently)

----------------------------------------------------------------------------------
...
> When a fax is received all
> goes well.  When I try to print it the log contains several lines like:
> 
> Bad code word at scanline 265 (x 247)
> 
> When the job goes to the printer I get garbage.  I've tried opening the
> tif file with various different viewers all of which complain about the
> file being corrupted or an error occurring. 

This is pretty normal. Fax protocol (without ECM) is unreliable, and broken 
scan lines sometimes happen. Hylafax by default stores them to TIFF file
"as is".

> Any suggestions of where to look for this?

You have a number of options to change this behaviour:

1. If you use Class2/2.0 modem, and it supports quality checking, try to
enable "receive copy quality correction" in the modem (man config for
Class2CQCmd parameter and your modem's manual). E.g. for Zyxel Elite Class
2.0 the appropriate command would be "AT+FCQ=2,2". Note that many modems
incorrectly reports that they support copy quality checking, although in
fact they do not!

(or)

2. Force Hylafax to check/correct copy quality itself. By default it does
not enabled in Class2/2.0 (if your modem reports CQ capabilities) and can
be achieved with

Class2CQQueryCmd: "!(0),(0)"

in your config.<modem device>
This way Hylafax will reencode the received image, and your viewer will be
quite happy (although visible transmission errors will not disappear).

(or)

3. Write ECM implementation for Hylafax (what I think about from time to
time) :-)))

Hope to hear from you soon,
Dmitry

-----------------------------------------------------------------------------


I use 

  RecvDataFormat: "2-D MMR" 

for a USR in Class 1 and this works well for me. 


Bernd


> Here's the log (below)... and when I run the command "fax2ps -S <filename>
> 2>/dev/null" it hangs on line 238. If you want that output I'll send it but
> I don't want to bog you down with lots of text. Here's what I got when I
> sent standard error to a file :
> Fax3Decode2D: /var/spool/fax/recvq/fax00004.tif: Uncompressed data (not
> supported) at scanline 27 (x1046).
> 
> Interestingly enough, I ran the tiff file through tiff2ps and it came out ok
> (but with a signifigant amount of errors)
> 
> Again, THANKS for all your help!!!
> 
> You talked of removing "fax2ps -S <filename> 2>/dev/null" from faxrcvd but
> it doesn't exist anywhere in that script.
> In my faxrcvd, I added the following line "fax2ps -S $1 | lpr -P
> <myfaxprinter>" to the standard script just before it begins the email
> construction part (otherwise it's the generic script included with the rpm).
> I don't having it handling any errors and it's still hanging....
> 
> Apr 12 14:05:43.55: [ 6035]: SESSION BEGIN 00000004 12626584152
> Apr 12 14:05:43.55: [ 6035]: <-- [4:ATA\r]
> Apr 12 14:05:50.14: [ 6035]: --> [74:+FHT:FF 03 40 32 35 31 34 49 50 4C 20
> 20 20
>  20 20 20 20 20 20 20 20 20 20 ]
> Apr 12 14:05:50.94: [ 6035]: --> [26:+FHT:FF 13 80 00 EE FA 02 ]
> Apr 12 14:05:52.00: [ 6035]: --> [5:+FCON]
> Apr 12 14:05:52.00: [ 6035]: ANSWER: FAX CONNECTION
> Apr 12 14:05:52.00: [ 6035]: STATE CHANGE: ANSWERING -> RECEIVING
> Apr 12 14:05:52.00: [ 6035]: MODEM input buffering enabled
> Apr 12 14:05:52.00: [ 6035]: RECV FAX: begin
> Apr 12 14:05:53.75: [ 6035]: --> [74:+FHR:FF 03 43 32 32 34 34 30 37 32 38
> 30 36
>  20 20 20 20 20 20 20 20 20 20 ]
> Apr 12 14:05:54.01: [ 6035]: --> [23:+FHR:FF 13 83 00 A2 28 ]
> Apr 12 14:05:57.24: [ 6035]: --> [28:+FTSI:"          6082704422"]
> Apr 12 14:05:57.24: [ 6035]: REMOTE TSI "6082704422"
> Apr 12 14:05:57.24: [ 6035]: --> [21:+FDCS:0,5,0,2,1,0,0,3]
> Apr 12 14:05:57.24: [ 6035]: REMOTE wants 14400 bit/s
> Apr 12 14:05:57.24: [ 6035]: REMOTE wants page width 1728 pixels in 215 mm
> Apr 12 14:05:57.24: [ 6035]: REMOTE wants unlimited page length
> Apr 12 14:05:57.24: [ 6035]: REMOTE wants 3.85 line/mm
> Apr 12 14:05:57.24: [ 6035]: REMOTE wants 2-D MR
> Apr 12 14:05:57.24: [ 6035]: --> [2:OK]
> Apr 12 14:05:57.24: [ 6035]: <-- [7:AT+FDR\r]
> Apr 12 14:05:58.34: [ 6035]: --> [14:+FHT:FF 13 84 ]
> Apr 12 14:05:58.63: [ 6035]: --> [5:+FCFR]
> Apr 12 14:05:58.63: [ 6035]: --> [28:+FTSI:"          6082704422"]
> Apr 12 14:05:58.63: [ 6035]: REMOTE TSI "6082704422"
> Apr 12 14:05:58.63: [ 6035]: --> [21:+FDCS:0,5,0,2,1,0,0,3]
> Apr 12 14:05:58.63: [ 6035]: REMOTE wants 14400 bit/s
> Apr 12 14:05:58.63: [ 6035]: REMOTE wants page width 1728 pixels in 215 mm
> Apr 12 14:05:58.63: [ 6035]: REMOTE wants unlimited page length
> Apr 12 14:05:58.63: [ 6035]: REMOTE wants 3.85 line/mm
> Apr 12 14:05:58.63: [ 6035]: REMOTE wants 2-D MR
> Apr 12 14:06:00.13: [ 6035]: --> [7:CONNECT]
> Apr 12 14:06:00.13: [ 6035]: RECV: begin page
> Apr 12 14:06:00.13: [ 6035]: RECV: send trigger 022
> Apr 12 14:06:00.13: [ 6035]: <-- data [1]
> Apr 12 14:06:00.90: [ 6035]: RECV/CQ: Bad 2D pixel count, row 0, got 0,
> expected
>  1728
> Apr 12 14:06:01.12: [ 6035]: RECV/CQ: Bad 1D pixel count, row 11, got 1732,
> expe
> cted 1728
> Apr 12 14:06:01.41: [ 6035]: RECV/CQ: Invalid 2D code word, row 27, x 1046
> Apr 12 14:06:01.41: [ 6035]: RECV/CQ: Bad 2D pixel count, row 27, got 1046,
> expe
> cted 1728
> Apr 12 14:06:05.12: [ 6035]: RECV/CQ: Bad 1D pixel count, row 260, got 1705,
> exp
> ected 1728
> Apr 12 14:06:05.12: [ 6035]: RECV/CQ: Bad 2D pixel count, row 261, got 1803,
> exp
> ected 1728
> Apr 12 14:06:09.22: [ 6035]: RECV/CQ: Bad 1D pixel count, row 500, got 1730,
> exp
> ected 1728
> Apr 12 14:06:14.87: [ 6035]: RECV/CQ: Invalid EOL code word, row 819, x 1364
> Apr 12 14:06:14.87: [ 6035]: RECV/CQ: Bad 2D pixel count, row 819, got 1364,
> exp
> ected 1728
> Apr 12 14:06:14.87: [ 6035]: RECV/CQ: Bad 2D pixel count, row 820, got 2092,
> exp
> ected 1728
> Apr 12 14:06:14.87: [ 6035]: RECV/CQ: Bad 1D pixel count, row 821, got 2160,
> exp
> ected 1728
> Apr 12 14:06:18.16: [ 6035]: RECV/CQ: Bad 1D pixel count, row 1050, got 0,
> expec
> ted 1728
> Apr 12 14:06:18.16: [ 6035]: RECV/CQ: Bad 1D pixel count, row 1051, got 0,
> expec
> ted 1728
> Apr 12 14:06:18.16: [ 6035]: RECV/CQ: Bad 1D pixel count, row 1052, got 0,
> expec
> ted 1728
> 
> Apr 12 14:06:18.16: [ 6035]: RECV/CQ: Bad 1D pixel count, row 1053, got 0,
> expec
> ted 1728
> Apr 12 14:06:18.16: [ 6035]: RECV/CQ: Bad 1D pixel count, row 1054, got 0,
> expec
> ted 1728
> Apr 12 14:06:18.32: [ 6035]: RECV: 31208 bytes of data, 1055 total lines
> Apr 12 14:06:18.32: [ 6035]: RECV/CQ: Adjusting for RTC found at row 1049
> Apr 12 14:06:18.32: [ 6035]: --> [15:+FPTS:1,0,0,0,0]
> Apr 12 14:06:19.60: [ 6035]: --> [14:+FHR:FF 13 4F ]
> Apr 12 14:06:19.60: [ 6035]: --> [6:+FET:0]
> Apr 12 14:06:19.60: [ 6035]: RECV recv MPS (more pages, same document)
> Apr 12 14:06:19.60: [ 6035]: --> [2:OK]
> Apr 12 14:06:19.60: [ 6035]: RECV send MCF (message confirmation)
> Apr 12 14:06:19.60: [ 6035]: RECV FAX (00000004): from 6082704422, page 1 in
> 0:2
> 2, INF, 3.85 line/mm, 2-D MR, 14400 bit/s
> Apr 12 14:06:19.60: [ 6035]: <-- [7:AT+FDR\r]
> Apr 12 14:06:20.77: [ 6035]: --> [14:+FHT:FF 13 8C ]
> Apr 12 14:06:22.55: [ 6035]: --> [7:CONNECT]
> Apr 12 14:06:22.55: [ 6035]: RECV: begin page
> Apr 12 14:06:22.55: [ 6035]: RECV: send trigger 022
> Apr 12 14:06:22.55: [ 6035]: <-- data [1]
> Apr 12 14:06:23.32: [ 6035]: RECV/CQ: Bad 2D pixel count, row 0, got 0,
> expected
>  1728
> Apr 12 14:06:26.01: [ 6035]: RECV/CQ: Bad 2D pixel count, row 116, got 1913,
> exp
> ected 1728
> Apr 12 14:06:26.88: [ 6035]: RECV/CQ: Invalid EOL code word, row 162, x 465
> 
> Apr 12 14:06:26.88: [ 6035]: RECV/CQ: Bad 2D pixel count, row 162, got 465,
> expe
> cted 1728
> Apr 12 14:06:26.88: [ 6035]: RECV/CQ: Invalid BlackTable code word, row 163,
> x 5
> 39
> Apr 12 14:06:26.88: [ 6035]: RECV/CQ: Bad 1D pixel count, row 163, got 539,
> expe
> cted 1728
> Apr 12 14:06:26.96: [ 6035]: RECV/CQ: Bad 2D pixel count, row 164, got 1730,
> exp
> ected 1728
> Apr 12 14:06:27.32: [ 6035]: RECV/CQ: Invalid EOL code word, row 181, x 1618
> Apr 12 14:06:27.32: [ 6035]: RECV/CQ: Bad 2D pixel count, row 181, got 1618,
> exp
> ected 1728
> Apr 12 14:06:27.98: [ 6035]: RECV/CQ: Bad 1D pixel count, row 220, got 1773,
> exp
> ected 1728
> Apr 12 14:06:27.98: [ 6035]: RECV/CQ: Bad 2D pixel count, row 221, got 1729,
> exp
> ected 1728
> Apr 12 14:06:41.53: [ 6035]: RECV: 32751 bytes of data, 838 total lines
> Apr 12 14:06:54.31: [ 6035]: RECV/CQ: Bad 1D pixel count, row 1341, got 0,
> expec
> ted 1728
> Apr 12 14:06:54.31: [ 6035]: RECV/CQ: Bad 1D pixel count, row 1342, got 0,
> expec
> ted 1728
> Apr 12 14:06:54.31: [ 6035]: RECV/CQ: Bad 1D pixel count, row 1343, got 0,
> expec
> ted 1728
> Apr 12 14:06:54.31: [ 6035]: RECV/CQ: Bad 1D pixel count, row 1343, got 0,
> expec
> ted 1728
> Apr 12 14:06:54.31: [ 6035]: RECV/CQ: Bad 1D pixel count, row 1344, got 0, e
> xpec
> ted 1728
> Apr 12 14:06:54.31: [ 6035]: RECV/CQ: Bad 1D pixel count, row 1345, got 0,
> expec
> ted 1728
> Apr 12 14:06:54.43: [ 6035]: RECV: 23119 bytes of data, 1346 total lines
> Apr 12 14:06:54.43: [ 6035]: RECV/CQ: Adjusting for RTC found at row 1340
> Apr 12 14:06:54.43: [ 6035]: --> [15:+FPTS:1,0,0,0,0]
> Apr 12 14:06:55.72: [ 6035]: --> [14:+FHR:FF 13 2F ]
> Apr 12 14:06:55.72: [ 6035]: --> [6:+FET:2]
> Apr 12 14:06:55.72: [ 6035]: RECV recv EOP (no more pages or documents)
> Apr 12 14:06:55.72: [ 6035]: --> [2:OK]
> Apr 12 14:06:55.72: [ 6035]: RECV send MCF (message confirmation)
> Apr 12 14:06:55.72: [ 6035]: RECV FAX (00000004): from 6082704422, page 2 in
> 0:3
> 6, INF, 3.85 line/mm, 2-D MR, 14400 bit/s
> Apr 12 14:06:55.72: [ 6035]: RECV FAX (00000004): recvq/fax00004.tif from
> 608270
> 4422, route to <unspecified>, 2 pages in 1:03
> Apr 12 14:06:55.72: [ 6035]: <-- [7:AT+FDR\r]
> Apr 12 14:06:56.82: [ 6035]: --> [14:+FHT:FF 13 8C ]
> Apr 12 14:06:56.82: [ 6035]: RECV FAX: bin/faxrcvd "recvq/fax00004.tif"
> "ttyR0"
> "00000004" ""
> ----- Original Message -----
> From: "Lee Howard" <faxguy@deanox.com>
> To: "Dennis Fellows" <dennis@lamtop.com>; <hylafax-users@hylafax.org>
> Sent: Friday, April 13, 2001 10:49 AM
> Subject: Re: [hylafax-users] Bad 1D/2D pixel counts and invalid code words
> UPDATE
> 
> 
> > At 10:15 AM 4/13/01 -0500, Dennis Fellows wrote:
> > >I sent a few questions yesterday about some errors in my session log. I
> was
> > >told everything was normal but today I noticed that my faxgetty is hung
> > >(again) and it occured on the very same transmission that I sent the logs
> > >about.
> > >
> > >If you would like I can resend the logs (and modem config) or you could
> > >reference message " Bad 1D/2D pixel counts and invalid code words".
> > >
> > >Here is some added info. I did a "ps ax | grep fax" and got...
> > >5259 ?        S      0:00 faxq
> > > 5269 ?        S      0:00 hfaxd -i hylafax
> > > 6035 ?        S      0:00 /usr/sbin/faxgetty ttyR0
> > > 6036 ?        S      0:00 /usr/sbin/faxgetty ttyR1
> > > 6037 ?        S      0:00 /usr/sbin/faxgetty ttyR2
> > > 6038 ?        S      0:00 /usr/sbin/faxgetty ttyR3
> > > 6180 ?        S      0:00 sh bin/faxrcvd recvq/fax00004.tif ttyR0
> 00000004
> > > 6182 ?        R    1123:26 /usr/bin/fax2ps -S recvq/fax00004.tif
> > > 7019 pts/0    S      0:00 grep fax
> > >
> > >I did a faxstat and got...
> > >HylaFAX scheduler on hpe60.lamtop.com: Running
> > >Modem ttyR0 (1.262.658.4152): Receiving from "6082704422"
> > >Modem ttyR1 (1.262.658.4184): Running and idle
> > >Modem ttyR2 (1.262.658.4221): Running and idle
> > >Modem ttyR3 (1.262.658.1463): Running and idle
> > >
> > >I am running Hylafax 4.1beta3 (binary rpm
> hylafax-4.1beta3-1rh7.i386.rpm),
> > >RH7.0, libtiff 3.5.5-7, Multitech 2834Zdx modem, and a Rocketport PCI
> > >multi-I/O board (RJ45 Octacable)
> > >
> > >I probably shouldn't say that the faxgetty is hung because it seems to be
> a
> > >problem probably with libtiff, again. I say faxgetty is hung because my
> > >modem won't answer the phone. I'm going to leave the system "as is"
> (since
> > >it's not a production machine yet) so someone (like Lee?) can get more
> info
> > >if needed.
> >
> > Here I am. :-)  It looks like fax2ps is hung, not faxgetty, but because
> > faxrcvd hasn't returned anything to faxgetty... faxgetty hasn't changed
> the
> > "Receiving from..." message.
> >
> > I'd *still* like a look at your session log now that you've turned up
> > SessionTracing to 0xFFF.  The log should be there without killing
> faxgetty,
> > fax2ps, or faxrcvd.
> >
> > fax2ps is a part of libtiff, not HylaFAX (although the origins of both are
> > the same).  What would be ideal, though, is for you to re-create by hand
> > and test the fax2ps command issued by faxrcvd which is causing the hang:
> >
> >  $FAX2PS $FILE 2>/dev/null
> >
> > I'd guess that you could remove this portion from your faxrcvd without any
> > ill effects as I've never seen a postscript attachment with the receipt
> > notifications.
> >
> > Lee.
> >
> >
> >
> >
> 
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
> 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services