Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Faxgetty hanging
OK, OK, I'll upgrade like you suggest. :)
This isn't a production machine (yet) so I can make the upgrade without fear
of breaking something.
-Session log -
Apr 12 06:26:18.84: [ 944]: SESSION BEGIN 00000047 12626584152
Apr 12 06:26:18.84: [ 944]: <-- [4:ATA\r]
Apr 12 06:26:28.71: [ 944]: --> [5:+FCON]
Apr 12 06:26:28.71: [ 944]: ANSWER: FAX CONNECTION
Apr 12 06:26:28.71: [ 944]: RECV FAX: begin
Apr 12 06:26:33.94: [ 944]: --> [28:+FTSI:" 6082704422"]
Apr 12 06:26:33.94: [ 944]: REMOTE TSI "6082704422"
Apr 12 06:26:33.94: [ 944]: --> [21:+FDCS:0,5,0,2,1,0,0,3]
Apr 12 06:26:33.94: [ 944]: REMOTE wants 14400 bit/s
Apr 12 06:26:33.94: [ 944]: REMOTE wants page width 1728 pixels in 215 mm
Apr 12 06:26:33.94: [ 944]: REMOTE wants unlimited page length
Apr 12 06:26:33.94: [ 944]: REMOTE wants 3.85 line/mm
Apr 12 06:26:33.94: [ 944]: REMOTE wants 2-D MR
Apr 12 06:26:33.94: [ 944]: --> [2:OK]
Apr 12 06:26:33.94: [ 944]: <-- [7:AT+FDR\r]
Apr 12 06:26:35.35: [ 944]: --> [5:+FCFR]
Apr 12 06:26:35.35: [ 944]: --> [28:+FTSI:" 6082704422"]
Apr 12 06:26:35.35: [ 944]: REMOTE TSI "6082704422"
Apr 12 06:26:35.35: [ 944]: --> [21:+FDCS:0,5,0,2,1,0,0,3]
Apr 12 06:26:35.35: [ 944]: REMOTE wants 14400 bit/s
Apr 12 06:26:35.35: [ 944]: REMOTE wants page width 1728 pixels in 215 mm
Apr 12 06:26:35.35: [ 944]: REMOTE wants unlimited page length
Apr 12 06:26:35.35: [ 944]: REMOTE wants unlimited page length
Apr 12 06:26:35.35: [ 944]: REMOTE wants 3.85 line/mm
Apr 12 06:26:35.35: [ 944]: REMOTE wants 2-D MR
Apr 12 06:26:36.85: [ 944]: --> [7:CONNECT]
Apr 12 06:26:36.85: [ 944]: RECV: begin page
Apr 12 06:26:36.85: [ 944]: RECV: send trigger 022
Apr 12 06:26:36.85: [ 944]: <-- data [1]
Apr 12 06:26:51.90: [ 944]: RECV: 25556 bytes of data, 1063 total lines
Apr 12 06:26:51.90: [ 944]: --> [15:+FPTS:1,0,0,0,0]
Apr 12 06:26:53.18: [ 944]: --> [6:+FET:0]
Apr 12 06:26:53.18: [ 944]: RECV recv MPS (more pages, same document)
Apr 12 06:26:53.18: [ 944]: --> [2:OK]
Apr 12 06:26:53.18: [ 944]: RECV send MCF (message confirmation)
Apr 12 06:26:53.18: [ 944]: RECV FAX (00000047): from 6082704422, page 1 in
0:2
0, INF, 3.85 line/mm, 2-D MR, 14400 bit/s
Apr 12 06:26:53.18: [ 944]: <-- [7:AT+FDR\r]
Apr 12 06:26:56.10: [ 944]: --> [7:CONNECT]
Apr 12 06:26:56.10: [ 944]: RECV: begin page
Apr 12 06:26:56.10: [ 944]: RECV: send trigger 022
Apr 12 06:26:56.10: [ 944]: <-- data [1]
Apr 12 06:27:11.15: [ 944]: RECV: 25567 bytes of data, 1058 total lines
Apr 12 06:27:11.15: [ 944]: --> [15:+FPTS:1,0,0,0,0]
Apr 12 06:27:12.43: [ 944]: --> [6:+FET:0]
Apr 12 06:27:12.43: [ 944]: --> [6:+FET:0]
Apr 12 06:27:12.43: [ 944]: RECV recv MPS (more pages, same document)
Apr 12 06:27:12.43: [ 944]: --> [2:OK]
Apr 12 06:27:12.43: [ 944]: RECV send MCF (message confirmation)
Apr 12 06:27:12.43: [ 944]: RECV FAX (00000047): from 6082704422, page 2 in
0:1
9, INF, 3.85 line/mm, 2-D MR, 14400 bit/s
Apr 12 06:27:12.43: [ 944]: <-- [7:AT+FDR\r]
Apr 12 06:27:15.33: [ 944]: --> [7:CONNECT]
Apr 12 06:27:15.33: [ 944]: RECV: begin page
Apr 12 06:27:15.33: [ 944]: RECV: send trigger 022
Apr 12 06:27:15.33: [ 944]: <-- data [1]
Apr 12 06:27:31.23: [ 944]: RECV: 27103 bytes of data, 1064 total lines
Apr 12 06:27:31.23: [ 944]: --> [15:+FPTS:1,0,0,0,0]
Apr 12 06:27:32.52: [ 944]: --> [6:+FET:0]
Apr 12 06:27:32.52: [ 944]: RECV recv MPS (more pages, same document)
Apr 12 06:27:32.52: [ 944]: --> [2:OK]
Apr 12 06:27:32.52: [ 944]: RECV send MCF (message confirmation)
Apr 12 06:27:32.52: [ 944]: RECV FAX (00000047): from 6082704422, page 3 in
0:2
0, INF, 3.85 line/mm, 2-D MR, 14400 bit/s
Apr 12 06:27:32.52: [ 944]: <-- [7:AT+FDR\r]
Apr 12 06:27:35.44: [ 944]: --> [7:CONNECT]
Apr 12 06:27:35.44: [ 944]: RECV: begin page
Apr 12 06:27:35.44: [ 944]: RECV: send trigger 022
Apr 12 06:27:32.52: [ 944]: --> [2:OK]
Apr 12 06:27:32.52: [ 944]: RECV send MCF (message confirmation)
Apr 12 06:27:32.52: [ 944]: RECV FAX (00000047): from 6082704422, page 3 in
0:2
0, INF, 3.85 line/mm, 2-D MR, 14400 bit/s
Apr 12 06:27:32.52: [ 944]: <-- [7:AT+FDR\r]
Apr 12 06:27:35.44: [ 944]: --> [7:CONNECT]
Apr 12 06:27:35.44: [ 944]: RECV: begin page
Apr 12 06:27:35.44: [ 944]: RECV: send trigger 022
Apr 12 06:27:35.44: [ 944]: <-- data [1]
Apr 12 06:27:51.46: [ 944]: RECV: 28573 bytes of data, 1064 total lines
Apr 12 06:27:51.46: [ 944]: --> [15:+FPTS:1,0,0,0,0]
Apr 12 06:27:52.84: [ 944]: --> [6:+FET:0]
Apr 12 06:27:52.84: [ 944]: RECV recv MPS (more pages, same document)
Apr 12 06:27:52.84: [ 944]: --> [2:OK]
Apr 12 06:27:52.84: [ 944]: RECV send MCF (message confirmation)
Apr 12 06:27:52.84: [ 944]: RECV FAX (00000047): from 6082704422, page 4 in
0:2
0, INF, 3.85 line/mm, 2-D MR, 14400 bit/s
Apr 12 06:27:52.84: [ 944]: <-- [7:AT+FDR\r]
Apr 12 06:27:55.76: [ 944]: --> [7:CONNECT]
Apr 12 06:27:55.76: [ 944]: RECV: begin page
Apr 12 06:27:55.76: [ 944]: RECV: send trigger 022
Apr 12 06:27:55.76: [ 944]: <-- data [1]
Apr 12 07:49:19.61: [ 944]: CLOSE /dev/ttyR0
After killing the faxgetty it sent the last line (note the time!!!)
Here's the config file for that line (beginning snipped)
[SNIP]
CountryCode: 1
AreaCode: 262
FAXNumber: 1.262.658.4152
LongDistancePrefix: 1
InternationalPrefix: 011
DialStringRules: etc/dialrules
ServerTracing: 1
SessionTracing: 11
RecvFileMode: 0600
LogFileMode: 0600
DeviceMode: 0600
RingsBeforeAnswer: 1
SpeakerVolume: off
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "Laminated Products x4152"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%p of %%t"
MaxRecvPages: 250
#
#
TagLineFormat: "From %%l|%c|Page %%p of %%t"
MaxRecvPages: 250
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class2 # use class 2 interface
ModemRate: 57600 # lock rate for DCE-DTE
communication
ModemFlowControl: rtscts # default
#
ModemHardFlowCmd: AT&E4 # hardware flow control
ModemSoftFlowCmd: AT&E5 # software flow control
ModemSetupDTRCmd: AT&D3 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or
not)
ModemSetupAACmd: AT+FAA=1 # enable adaptive-answer in class 2
#
# NB: some models get confused by the @
#
ModemDialCmd: ATDT%s@ # T for tone dialing, @ for silence
#
Class2RecvDataTrigger: "\022" # character sent to modem to start
recv
Class2CQQueryCmd: "!(0),(0)" # Enable Quality Check by DF
The CQQuery command was NOT in use at the time of the error
Thanks
----- Original Message -----
From: "Lee Howard" <faxguy@deanox.com>
To: "Dennis Fellows" <dennis@lamtop.com>; <hylafax-users@hylafax.org>
Sent: Thursday, April 12, 2001 10:56 AM
Subject: Re: [hylafax-users] Faxgetty hanging
> At 10:43 AM 4/12/01 -0500, Dennis Fellows wrote:
> >I just experienced a problem where an incoming fax mysteriously stops.
> >Faxstat reports that it's still receiving and the log for that fax
doesn't
> >show any errors but also doesn't show any normal end of comms. It's as
> >though the log is left open with the line and faxgetty is waiting forever
> >for the fax to continue.
> >
> >I reported a similar error a week ago but received no response because I
was
> >using libtiff 3.4 with hylafax4.1beta2. I've now re-updated to
> >libtiff3.5.5-7.
>
> You're still using 4.1beta2 I suppose? A glimpse at
> http://www.hylafax.org/4.1beta3.html should be convincing enough to
> upgrade, I would think.
>
> >I will send the log and modemconfig if you wish but is there a timeout
that
> >I can set for an incoming fax. When I did a "ps ax | grep fax", the
faxgetty
> >controlling the line showed it had been running for over 80mins.
>
> Logs would help.
>
> Lee.
>
>
>
>
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null