Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] (no subject)
I installed hylafax On SuSE 6.4(fax number 15) and faxnow on window 95 box(fax
number is 11),I send fax to each other for test target!a few send and recieve
ok , others complete fail.
some time it okay, some time not ok, why?
what meaning for "Busy signal detected" ?
why "T.30 T2 timeout "
log following:
====================begin of send to faxnow(win95 box ,fax num 11)==============
Apr 10 15:05:39.21: [ 1923]: SESSION BEGIN 00000041 11
Apr 10 15:05:39.21: [ 1923]: SEND FAX: JOB 6 DEST 11 COMMID 00000041
Apr 10 15:05:39.21: [ 1923]: DELAY 2600 ms
Apr 10 15:05:41.81: [ 1923]: <-- [4:ATZ\r]
Apr 10 15:05:41.94: [ 1923]: --> [2:OK]
Apr 10 15:05:41.94: [ 1923]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Apr 10 15:05:42.08: [ 1923]: --> [16:ATE0V1Q0X4S0=0H0]
Apr 10 15:05:42.08: [ 1923]: --> [2:OK]
Apr 10 15:05:42.08: [ 1923]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r]
Apr 10 15:05:42.22: [ 1923]: --> [2:OK]
Apr 10 15:05:42.22: [ 1923]: <-- [14:AT+FCLASS=2.0\r]
Apr 10 15:05:42.36: [ 1923]: --> [2:OK]
Apr 10 15:05:42.36: [ 1923]: <-- [9:AT+FLO=2\r]
Apr 10 15:05:42.50: [ 1923]: --> [2:OK]
Apr 10 15:05:42.50: [ 1923]: <-- [9:AT+FPP=0\r]
Apr 10 15:05:42.64: [ 1923]: --> [2:OK]
Apr 10 15:05:42.64: [ 1923]: <-- [9:AT+FBO=0\r]
Apr 10 15:05:42.78: [ 1923]: --> [2:OK]
Apr 10 15:05:42.78: [ 1923]: <-- [10:AT+FCT=30\r]
Apr 10 15:05:42.92: [ 1923]: --> [2:OK]
Apr 10 15:05:42.92: [ 1923]: <-- [15:AT+FNR=1,1,1,0\r]
Apr 10 15:05:43.06: [ 1923]: --> [2:OK]
Apr 10 15:05:43.06: [ 1923]: <-- [9:AT+FIE=0\r]
Apr 10 15:05:43.20: [ 1923]: --> [2:OK]
Apr 10 15:05:43.20: [ 1923]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Apr 10 15:05:43.34: [ 1923]: --> [2:OK]
Apr 10 15:05:43.34: [ 1923]: <-- [5:ATM1\r]
Apr 10 15:05:43.47: [ 1923]: --> [2:OK]
Apr 10 15:05:43.47: [ 1923]: <-- [14:AT+FCLASS=2.0\r]
Apr 10 15:05:43.71: [ 1923]: --> [2:OK]
Apr 10 15:05:43.71: [ 1923]: <-- [9:AT+FLO=2\r]
Apr 10 15:05:43.95: [ 1923]: --> [2:OK]
Apr 10 15:05:43.95: [ 1923]: <-- [9:AT+FPP=0\r]
Apr 10 15:05:44.19: [ 1923]: --> [2:OK]
Apr 10 15:05:44.19: [ 1923]: <-- [9:AT+FBO=0\r]
Apr 10 15:05:44.43: [ 1923]: --> [2:OK]
Apr 10 15:05:44.43: [ 1923]: <-- [10:AT+FCT=30\r]
Apr 10 15:05:44.67: [ 1923]: --> [2:OK]
Apr 10 15:05:44.67: [ 1923]: <-- [15:AT+FNR=1,1,1,0\r]
Apr 10 15:05:44.91: [ 1923]: --> [2:OK]
Apr 10 15:05:44.91: [ 1923]: <-- [9:AT+FIE=0\r]
Apr 10 15:05:45.15: [ 1923]: --> [2:OK]
Apr 10 15:05:45.15: [ 1923]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Apr 10 15:05:45.39: [ 1923]: --> [2:OK]
Apr 10 15:05:45.39: [ 1923]: <-- [19:AT+FLI="AlexModem"\r]
Apr 10 15:05:45.63: [ 1923]: --> [2:OK]
Apr 10 15:05:45.63: [ 1923]: DIAL 11
Apr 10 15:05:45.63: [ 1923]: <-- [7:ATDT11\r]
Apr 10 15:05:49.63: [ 1923]: --> [4:BUSY]
Apr 10 15:05:49.63: [ 1923]: SEND FAILED: Busy signal detected
Apr 10 15:05:49.63: [ 1923]: <-- [5:ATH0\r]
Apr 10 15:05:49.86: [ 1923]: --> [2:OK]
Apr 10 15:05:49.86: [ 1923]: SESSION END
==================== end of send to faxnow(win95 box ,fax num 11)==============
=====================begin of send ok==========================================
Apr 10 15:12:15.32: [ 1990]: SESSION BEGIN 00000043 11
Apr 10 15:12:15.32: [ 1990]: SEND FAX: JOB 6 DEST 11 COMMID 00000043
Apr 10 15:12:15.32: [ 1990]: DELAY 2600 ms
Apr 10 15:12:17.92: [ 1990]: <-- [4:ATZ\r]
Apr 10 15:12:18.05: [ 1990]: --> [2:OK]
Apr 10 15:12:18.05: [ 1990]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Apr 10 15:12:18.19: [ 1990]: --> [16:ATE0V1Q0X4S0=0H0]
Apr 10 15:12:18.19: [ 1990]: --> [2:OK]
Apr 10 15:12:18.19: [ 1990]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r]
Apr 10 15:12:18.33: [ 1990]: --> [2:OK]
Apr 10 15:12:18.33: [ 1990]: <-- [14:AT+FCLASS=2.0\r]
Apr 10 15:12:18.47: [ 1990]: --> [2:OK]
Apr 10 15:12:18.47: [ 1990]: <-- [9:AT+FLO=2\r]
Apr 10 15:12:18.61: [ 1990]: --> [2:OK]
Apr 10 15:12:18.61: [ 1990]: <-- [9:AT+FPP=0\r]
Apr 10 15:12:18.75: [ 1990]: --> [2:OK]
Apr 10 15:12:18.75: [ 1990]: <-- [9:AT+FBO=0\r]
Apr 10 15:12:18.89: [ 1990]: --> [2:OK]
Apr 10 15:12:18.89: [ 1990]: <-- [10:AT+FCT=30\r]
Apr 10 15:12:19.03: [ 1990]: --> [2:OK]
Apr 10 15:12:19.03: [ 1990]: <-- [15:AT+FNR=1,1,1,0\r]
Apr 10 15:12:19.17: [ 1990]: --> [2:OK]
Apr 10 15:12:19.17: [ 1990]: <-- [9:AT+FIE=0\r]
Apr 10 15:12:19.31: [ 1990]: --> [2:OK]
Apr 10 15:12:19.31: [ 1990]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Apr 10 15:12:19.45: [ 1990]: --> [2:OK]
Apr 10 15:12:19.45: [ 1990]: <-- [5:ATM1\r]
Apr 10 15:12:19.58: [ 1990]: --> [2:OK]
Apr 10 15:12:19.58: [ 1990]: <-- [14:AT+FCLASS=2.0\r]
Apr 10 15:12:19.82: [ 1990]: --> [2:OK]
Apr 10 15:12:19.82: [ 1990]: <-- [9:AT+FLO=2\r]
Apr 10 15:12:20.06: [ 1990]: --> [2:OK]
Apr 10 15:12:20.06: [ 1990]: <-- [9:AT+FPP=0\r]
Apr 10 15:12:20.30: [ 1990]: --> [2:OK]
Apr 10 15:12:20.30: [ 1990]: <-- [9:AT+FBO=0\r]
Apr 10 15:12:20.54: [ 1990]: --> [2:OK]
Apr 10 15:12:20.54: [ 1990]: <-- [10:AT+FCT=30\r]
Apr 10 15:12:20.78: [ 1990]: --> [2:OK]
Apr 10 15:12:20.78: [ 1990]: <-- [15:AT+FNR=1,1,1,0\r]
Apr 10 15:12:21.02: [ 1990]: --> [2:OK]
Apr 10 15:12:21.02: [ 1990]: <-- [9:AT+FIE=0\r]
Apr 10 15:12:21.26: [ 1990]: --> [2:OK]
Apr 10 15:12:21.26: [ 1990]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Apr 10 15:12:21.50: [ 1990]: --> [2:OK]
Apr 10 15:12:21.50: [ 1990]: <-- [19:AT+FLI="AlexModem"\r]
Apr 10 15:12:21.74: [ 1990]: --> [2:OK]
Apr 10 15:12:21.74: [ 1990]: DIAL 11
Apr 10 15:12:21.74: [ 1990]: <-- [7:ATDT11\r]
Apr 10 15:12:34.08: [ 1990]: --> [4:+FCO]
Apr 10 15:12:37.15: [ 1990]: --> [27:+FCI:" 87321393"]
Apr 10 15:12:37.15: [ 1990]: REMOTE CSI "87321393"
Apr 10 15:12:37.15: [ 1990]: --> [20:+FIS:1,5,0,2,0,0,0,0]
Apr 10 15:12:37.15: [ 1990]: --> [2:OK]
Apr 10 15:12:37.15: [ 1990]: REMOTE best rate 14400 bit/s
Apr 10 15:12:37.15: [ 1990]: REMOTE max page width 1728 pixels in 215 mm
Apr 10 15:12:37.15: [ 1990]: REMOTE max unlimited page length
Apr 10 15:12:37.15: [ 1990]: REMOTE best vres 7.7 line/mm
Apr 10 15:12:37.15: [ 1990]: REMOTE best format 1-D MR
Apr 10 15:12:37.15: [ 1990]: REMOTE best 0 ms/scanline
Apr 10 15:12:37.15: [ 1990]: USE 14400 bit/s
Apr 10 15:12:37.15: [ 1990]: USE 0 ms/scanline
Apr 10 15:12:37.15: [ 1990]: SEND file "docq/doc6.ps;30"
Apr 10 15:12:37.15: [ 1990]: USE page width 1728 pixels in 215 mm
Apr 10 15:12:37.15: [ 1990]: USE unlimited page length
Apr 10 15:12:37.15: [ 1990]: USE 3.85 line/mm
Apr 10 15:12:37.15: [ 1990]: USE 1-D MR
Apr 10 15:12:37.15: [ 1990]: <-- [23:AT+FIS=0,5,0,2,0,0,0,0\r]
Apr 10 15:12:37.39: [ 1990]: --> [2:OK]
Apr 10 15:12:37.39: [ 1990]: <-- [7:AT+FDT\r]
Apr 10 15:12:37.66: [ 1990]: --> [20:+FCS:0,5,0,2,0,0,0,0]
Apr 10 15:12:44.35: [ 1990]: --> [7:CONNECT]
Apr 10 15:12:44.35: [ 1990]: SEND begin page
Apr 10 15:12:44.35: [ 1990]: <-- data [1027]
Apr 10 15:12:44.35: [ 1990]: <-- data [478]
Apr 10 15:12:44.35: [ 1990]: SENT 1502 bytes of data
Apr 10 15:12:44.35: [ 1990]: SEND 1D RTC
Apr 10 15:12:44.35: [ 1990]: <-- data [9]
Apr 10 15:12:44.35: [ 1990]: SEND end page
Apr 10 15:12:44.35: [ 1990]: SEND send EOP (no more pages or documents)
Apr 10 15:12:44.35: [ 1990]: <-- data [2]
Apr 10 15:12:49.38: [ 1990]: --> [7:+FHS:00]
Apr 10 15:12:49.38: [ 1990]: REMOTE HANGUP: Normal and proper end of connection
(code 0)
Apr 10 15:12:49.38: [ 1990]: SEND recv MCF (message confirmation)
Apr 10 15:12:49.38: [ 1990]: SEND FAX (00000043): FROM root@htgzln042.sms.com
TO 11 (page 1 of 1 sent in 0:12)
Apr 10 15:12:49.38: [ 1990]: SEND FAX (00000043): FROM root@htgzln042.sms.com
TO 11 (docq/doc6.ps;30 sent in 0:12)
Apr 10 15:12:49.38: [ 1990]: <-- [5:ATH0\r]
Apr 10 15:12:49.50: [ 1990]: --> [2:OK]
Apr 10 15:12:49.50: [ 1990]: SESSION END
=====================end of send ok============================================
=================== revieve fail ===============================================
Apr 10 14:34:55.33: [ 285]: SESSION BEGIN 00000031 86208732139015
Apr 10 14:34:55.33: [ 285]: <-- [4:ATA\r]
Apr 10 14:35:04.24: [ 285]: --> [4:+FCO]
Apr 10 14:35:04.24: [ 285]: ANSWER: FAX CONNECTION
Apr 10 14:35:04.24: [ 285]: RECV FAX: begin
Apr 10 14:35:06.28: [ 285]: --> [27:+FTI:" 87321393"]
Apr 10 14:35:06.28: [ 285]: REMOTE TSI "87321393"
Apr 10 14:35:06.28: [ 285]: --> [20:+FCS:1,5,0,2,0,0,0,0]
Apr 10 14:35:06.28: [ 285]: REMOTE wants 14400 bit/s
Apr 10 14:35:06.28: [ 285]: REMOTE wants page width 1728 pixels in 215 mm
Apr 10 14:35:06.28: [ 285]: REMOTE wants unlimited page length
Apr 10 14:35:06.28: [ 285]: REMOTE wants 7.7 line/mm
Apr 10 14:35:06.28: [ 285]: REMOTE wants 1-D MR
Apr 10 14:35:06.28: [ 285]: --> [2:OK]
Apr 10 14:35:06.28: [ 285]: <-- [7:AT+FDR\r]
Apr 10 14:35:16.78: [ 285]: --> [7:+FHS:73]
Apr 10 14:35:16.78: [ 285]: REMOTE HANGUP: T.30 T2 timeout, expected page not
received (code 73)
Apr 10 14:35:16.78: [ 285]: RECV FAX (00000031): recvq/fax00002.tif from
87321393, route to <unspecified>, 0 pages in 0:12
Apr 10 14:35:16.78: [ 285]: RECV FAX: T.30 T2 timeout, expected page not
received
Apr 10 14:35:16.78: [ 285]: RECV FAX (00000031): session with 87321393
terminated abnormally: T.30 T2 timeout, expected page not received
Apr 10 14:35:16.78: [ 285]: RECV FAX:
bin/faxrcvd "recvq/fax00002.tif" "modem" "00000031" "T.30 T2 timeout, expected
page not received"
Apr 10 14:35:16.86: [ 285]: RECV FAX: end
Apr 10 14:35:16.86: [ 285]: SESSION END
===================recieve fail end =======================================
====================recieve ok begin=======================================
Apr 10 15:02:33.40: [ 1807]: SESSION BEGIN 00000040 15
Apr 10 15:02:33.40: [ 1807]: <-- [4:ATA\r]
Apr 10 15:02:40.57: [ 1807]: --> [4:+FCO]
Apr 10 15:02:40.57: [ 1807]: ANSWER: FAX CONNECTION
Apr 10 15:02:40.57: [ 1807]: RECV FAX: begin
Apr 10 15:02:42.78: [ 1807]: --> [27:+FTI:" 87321393"]
Apr 10 15:02:42.78: [ 1807]: REMOTE TSI "87321393"
Apr 10 15:02:42.78: [ 1807]: --> [20:+FCS:1,5,0,2,0,0,0,0]
Apr 10 15:02:42.78: [ 1807]: REMOTE wants 14400 bit/s
Apr 10 15:02:42.78: [ 1807]: REMOTE wants page width 1728 pixels in 215 mm
Apr 10 15:02:42.78: [ 1807]: REMOTE wants unlimited page length
Apr 10 15:02:42.78: [ 1807]: REMOTE wants 7.7 line/mm
Apr 10 15:02:42.78: [ 1807]: REMOTE wants 1-D MR
Apr 10 15:02:42.78: [ 1807]: --> [2:OK]
Apr 10 15:02:42.78: [ 1807]: <-- [7:AT+FDR\r]
Apr 10 15:02:48.32: [ 1807]: --> [7:CONNECT]
Apr 10 15:02:48.32: [ 1807]: RECV: begin page
Apr 10 15:02:48.32: [ 1807]: RECV: send trigger 022
Apr 10 15:02:48.32: [ 1807]: <-- data [1]
Apr 10 15:03:04.07: [ 1807]: RECV: 2399 total lines, 0 bad lines, 0 consecutive
bad lines
Apr 10 15:03:04.07: [ 1807]: --> [17:+FPS:1,2407,0,0,0]
Apr 10 15:03:05.44: [ 1807]: --> [6:+FET:2]
Apr 10 15:03:05.44: [ 1807]: RECV recv EOP (no more pages or documents)
Apr 10 15:03:05.44: [ 1807]: --> [2:OK]
Apr 10 15:03:05.44: [ 1807]: RECV send MCF (message confirmation)
Apr 10 15:03:05.44: [ 1807]: RECV FAX (00000040): from 87321393, page 1 in
0:23, INF, 7.7 line/mm, 1-D MR, 14400 bit/s
Apr 10 15:03:05.44: [ 1807]: RECV FAX (00000040): recvq/fax00004.tif from
87321393, route to <unspecified>, 1 pages in 0:25
Apr 10 15:03:05.44: [ 1807]: <-- [7:AT+FDR\r]
Apr 10 15:03:08.29: [ 1807]: --> [7:+FHS:00]
Apr 10 15:03:08.29: [ 1807]: REMOTE HANGUP: Normal and proper end of connection
(code 0)
Apr 10 15:03:08.29: [ 1807]: RECV FAX:
bin/faxrcvd "recvq/fax00004.tif" "modem" "00000040" ""
Apr 10 15:03:08.41: [ 1807]: RECV FAX: end
Apr 10 15:03:08.41: [ 1807]: SESSION END
=============================recieve ok end ==================================
-------------------------------------------------
This mail sent through IMP: mail.wizdomtech.com
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null