Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] faxgetty/faxsend conflict?



Hi

> I have an inkling maybe you've got a ttyS0/cua0 type problem between
> faxgetty and faxsend; they should both be on ttyS0 (or whatever port it

There shouldn't be anything set as cua0, everything I've configured relating
to HylaFAX has been done with ttyS0 (and it's a Red Hat 7 box, so nothing
else should be referencing cua0).

If I try to send faxes without faxgetty running I get this message:

FaxQueuer[2059]: JOB 1 (ready dest +44xxxxxx pri 127 tts 0:00 killtime
2:59:00): No assignable modem located

I looked up some information on this error which suggested faxgetty needed
to be running for the faxqueuer to work, so I started faxgetty on ttyS0,
sent a new fax to the server and it produced this:

FaxGetty[2354]: OPEN /dev/ttyS0
FaxGetty[2354]: MODEM USROBOTICS SPORTSTER V.34+ FAX /
FaxQueuer[2059]: JOB 1 (ready dest +44xxxxxx pri 127 tts 0:00 killtime
2:57:26): PROCESS
FaxQueuer[2059]: JOB 1 (active dest +44xxxxxx pri 127 tts 0:00 killtime
2:57:26): ACTIVE
FaxQueuer[2059]: JOB 1 (active dest +44xxxxxx pri 127 tts 0:00 killtime
2:57:26): PREPARE START
FaxQueuer[2355]: JOB 1 (active dest +44xxxxxx pri 127 tts 0:00 killtime
2:57:26): CONVERT DOCUMENT: bin/ps2fax -o docq/doc6.ps;01 -r 196 -w 1728 -l
297 -m 4294967295 -1 docq/doc6.ps.1
FaxQueuer[2059]: JOB 1 (active dest +44xxxxxx pri 127 tts 0:00 killtime
2:57:26): PREPARE DONE
FaxQueuer[2059]: JOB 1 (active dest +44xxxxxx pri 127 tts 0:00 killtime
2:57:26): CMD START /usr/sbin/faxsend -m ttyS0 sendq/q1 (PID 2359)
FaxGetty[2354]: ANSWER: Can not lock modem device
FaxSend[2359]: MODEM USROBOTICS SPORTSTER V.34+ FAX /
FaxSend[2359]: SEND FAX: JOB 1 DEST xxxxxx COMMID 00000681
FaxSend[2359]: SEND FAILED: Can not setup modem
FaxQueuer[2059]: JOB 1 (active dest +44xxxxxx pri 127 tts 0:00 killtime
2:57:10): CMD DONE: exit status 0
FaxQueuer[2059]: JOB 1 (sleeping dest +44xxxxxx pri 126 tts 0:00 killtime
2:57:10): SEND INCOMPLETE: requeue for 2:00; Can not setup modem
FaxQueuer[2059]: JOB 1 (sleeping dest +44xxxxxx pri 126 tts 0:00 killtime
2:57:10): SLEEP FOR 2:00

The only other thing I noticed, but I suspect isn't related to the problem,
is that where FaxSend lists the "SEND FAX: JOB 1 DEST xxxxxx...." it shows
the correct destination number I entered, but all of the other places the
number is shown, it lists it as +44 followed by the area code of the server,
followed by the full number of the destination.

Is there any other kind of debugging output I can send that would be useful?

Cheers,
--
Chris Jones
IT Department
ICM Group



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services