|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Faxes garbled but log not showing errors
Hello!
I'm running Redhat 7.0, Hylafax 4.1beta2 (binary rpm
hylafax-4.1beta2-2rh7.i386), libtiff 3.4beta037-2, MultiTech 2834ZDX's (firmware
3.16a - four of them) connected to a RocketPort MultiI/O board.
I'm having problems where some incoming faxes are perfect yet
others come across "hammered". Here's a typical receive log of a hammered
incoming fax...
Apr 04 12:23:43.46: [ 917]: SESSION BEGIN 00000012
12626584184
Apr 04 12:23:43.46: [ 917]: <--
[4:ATA\r]
Apr 04 12:23:52.93: [ 917]: -->
[5:+FCON]
Apr 04 12:23:52.93: [ 917]: ANSWER: FAX
CONNECTION
Apr 04 12:23:52.93: [ 917]: RECV FAX:
begin
Apr 04 12:23:58.16: [ 917]: -->
[28:+FTSI:"
6082704422"]
Apr 04 12:23:58.16: [ 917]: REMOTE TSI
"6082704422"
Apr 04 12:23:58.16: [ 917]: -->
[21:+FDCS:0,5,0,2,1,0,0,3]
Apr 04 12:23:58.16: [ 917]: REMOTE wants 14400
bit/s
Apr 04 12:23:58.16: [ 917]: REMOTE wants page width 1728 pixels in 215
mm
Apr 04 12:23:58.16: [ 917]: REMOTE
wants unlimited page
length
Apr 04 12:23:58.16: [ 917]: REMOTE wants 3.85
line/mm
Apr 04 12:23:58.16: [ 917]: REMOTE wants 2-D
MR
Apr 04 12:23:58.16: [ 917]: -->
[2:OK]
Apr 04 12:23:58.16: [ 917]: <--
[7:AT+FDR\r]
Apr 04 12:23:59.58: [ 917]: -->
[5:+FCFR]
Apr 04 12:23:59.58: [ 917]: -->
[28:+FTSI:"
6082704422"]
Apr 04 12:23:59.58: [ 917]: REMOTE TSI
"6082704422"
Apr 04 12:23:59.58: [ 917]: -->
[21:+FDCS:0,5,0,2,1,0,0,3]
Apr 04 12:23:59.58: [ 917]: REMOTE wants 14400
bit/s
Apr 04 12:23:59.58: [ 917]: REMOTE wants page width 1728 pixels in 215
mm
Apr 04 12:23:59.58: [ 917]: REMOTE
wants unlimited page
length
Apr 04 12:23:59.58: [ 917]: REMOTE wants 3.85
line/mm
Apr 04 12:23:59.58: [ 917]: REMOTE wants 2-D
MR
Apr 04 12:24:01.09: [ 917]: -->
[7:CONNECT]
Apr 04 12:24:01.09: [ 917]: RECV: begin
page
Apr 04 12:24:01.09: [ 917]: RECV: send trigger
022
Apr 04 12:24:01.09: [ 917]: <-- data
[1]
Apr 04 12:24:16.18: [ 917]: RECV: 25372 bytes of data, 579 total
lines
Apr 04 12:24:16.18:
[ 917]: -->
[15:+FPTS:1,0,0,0,0]
Apr 04 12:24:17.47: [ 917]: -->
[6:+FET:0]
Apr 04 12:24:17.47: [ 917]: RECV recv MPS (more pages, same
document)
Apr 04
12:24:17.47: [ 917]: -->
[2:OK]
Apr 04 12:24:17.47: [ 917]: RECV send MCF (message
confirmation)
Apr 04 12:24:17.47: [ 917]: RECV FAX (00000012): from 6082704422, page
1 in 0:1
9, INF, 3.85 line/mm, 2-D MR, 14400
bit/s
Apr 04 12:24:17.47: [ 917]: <--
[7:AT+FDR\r]
Apr 04 12:24:20.42: [ 917]: -->
[7:CONNECT]
Apr 04 12:24:20.42: [ 917]: RECV: begin
page
Apr 04 12:24:20.42: [ 917]: RECV: send trigger
022
Apr 04 12:24:20.42: [ 917]: <-- data
[1]
Apr 04 12:24:37.91: [ 917]: RECV: 30443 bytes of data, 54 total
lines
Apr 04
12:24:37.91: [ 917]: -->
[15:+FPTS:1,0,0,0,0]
Apr 04 12:24:39.20: [ 917]: -->
[6:+FET:0]
Apr 04 12:24:39.20: [ 917]: RECV recv MPS (more pages, same
document)
Apr 04
12:24:39.20: [ 917]: -->
[2:OK]
Apr 04 12:24:39.20: [ 917]: RECV send MCF (message
confirmation)
Apr 04 12:24:39.20: [ 917]: RECV FAX (00000012): from 6082704422, page
2 in 0:2
2, INF, 3.85 line/mm, 2-D MR, 14400
bit/s
Apr 04 12:24:39.20: [ 917]: <--
[7:AT+FDR\r]
Apr 04 12:24:42.16: [ 917]: -->
[7:CONNECT]
Apr 04 12:24:42.16: [ 917]: RECV: begin
page
Apr 04 12:24:42.16: [ 917]: RECV: send trigger
022
Apr 04 12:24:42.16: [ 917]: <-- data
[1]
Apr 04 12:24:57.95: [ 917]: RECV: 27965 bytes of data, 60 total
lines
Apr 04
12:24:57.95: [ 917]: -->
[15:+FPTS:1,0,0,0,0]
Apr 04 12:24:59.23: [ 917]: -->
[6:+FET:0]
Apr 04 12:24:59.23: [ 917]: RECV recv MPS (more pages, same
document)
Apr 04
12:24:59.23: [ 917]: -->
[2:OK]
Apr 04 12:24:59.23: [ 917]: RECV send MCF (message
confirmation)
Apr 04 12:24:59.23: [ 917]: RECV FAX (00000012): from 6082704422, page
3 in 0:2
0, INF, 3.85 line/mm, 2-D MR, 14400
bit/s
Apr 04 12:24:59.23: [ 917]: <--
[7:AT+FDR\r]
Apr 04 12:25:02.19: [ 917]: -->
[7:CONNECT]
Apr 04 12:25:02.19: [ 917]: RECV: begin
page
Apr 04 12:25:02.19: [ 917]: RECV: send trigger
022
Apr 04 12:24:59.23: [ 917]: <--
[7:AT+FDR\r]
Apr 04 12:25:02.19: [ 917]: -->
[7:CONNECT]
Apr 04 12:25:02.19: [ 917]: RECV: begin
page
Apr 04 12:25:02.19: [ 917]: RECV: send trigger
022
Apr 04 12:25:02.19: [ 917]: <-- data
[1]
Apr 04 12:25:20.63: [ 917]: RECV: 32371 bytes of data, 81 total
lines
Apr 04
12:25:20.63: [ 917]: -->
[15:+FPTS:1,0,0,0,0]
Apr 04 12:25:21.92: [ 917]: -->
[6:+FET:2]
Apr 04 12:25:21.92: [ 917]: RECV recv EOP (no more pages or
documents)
Apr 04
12:25:21.92: [ 917]: -->
[2:OK]
Apr 04 12:25:21.92: [ 917]: RECV send MCF (message
confirmation)
Apr 04 12:25:21.92: [ 917]: RECV FAX (00000012): from 6082704422, page
4 in 0:2
2, INF, 3.85 line/mm, 2-D MR, 14400
bit/s
Apr 04 12:25:21.92: [ 917]: RECV FAX (00000012): recvq/fax00012.tif
from 608270
4422, route to <unspecified>, 4 pages in
1:29
Apr 04 12:25:21.92: [ 917]: <--
[7:AT+FDR\r]
Apr 04 12:25:24.95: [ 917]: -->
[7:+FHNG:0]
Apr 04 12:25:24.95: [ 917]: REMOTE HANGUP: Normal and proper end of
connection
(code
0)
Apr 04 12:25:24.95: [ 917]: RECV FAX: bin/faxrcvd "recvq/fax00012.tif"
"ttyR1"
"00000012"
""
Apr 04 12:25:25.08: [ 917]: RECV FAX:
end
Apr 04 12:25:25.08: [ 917]: SESSION
END
The remote station normally gets a report that his fax was
successfully received my me. When I have the remote faxer send to one of my
stand alone fax machines (Richoh), his fax comes across with no problems. I
think I'm looking at not having my faxmodem config'd proper. Any help would be
greatly appreciated.
BTW, I switched to libtiff 3.4 when my modems were hanging
with the faxstat report of "Receiving from...". It seems to have
worked.
Best Regards,
Dennis Fellows
