-----Ursprüngliche
Nachricht-----
Von: hylafax-users-bounce@hylafax.org
[mailto:hylafax-users-bounce@hylafax.org]Im Auftrag von Falco
Fan
Gesendet am: Montag, 26. März 2001 10:26
An:
hylafax-users@hylafax.org
Betreff: [hylafax-users] Local fax cannot
send by HylaFax
Hi,
I have setup a Fax Server by RedHat 6.2 and
HylaFax 4.1beta2, client side is using WHFC, now it is in the testing
phase. A user report that he cannot send a local fax, the following is
the content of the mail notification.
When using faxstat -a, the status of TTS is
display as "No response to MPS repeat". But when I using a normal fax machine to fax to this destination, no
problem is detected.
Can anybody tell me how to solve this
problem.
Thanks
Falco
> Your facsimile job to xxxx xxxx was not sent
because:
> No response to MPS repeated 3
times
>
> The job will be retried at
15:34.
>
> ---- Transcript of session
follows ----
>
> Mar 26 15:27:56.22: [ 2877]: SESSION BEGIN
00000136 852xxxxxxxx
> Mar 26 15:27:56.22: [ 2877]: SEND FAX: JOB 80
DEST xxxx xxxx COMMID 00000136
> Mar 26 15:27:56.23: [ 2877]: DELAY 2600
ms
> Mar 26 15:27:58.82: [ 2877]: <-- [4:ATZ\r]
> Mar 26
15:27:58.95: [ 2877]: --> [2:OK]
> Mar 26 15:27:58.95: [ 2877]:
<-- [17:ATE0V1Q0X4S0=0H0\r]
> Mar 26 15:27:59.09: [ 2877]: -->
[16:ATE0V1Q0X4S0=0H0]
> Mar 26 15:27:59.09: [ 2877]: -->
[2:OK]
> Mar 26 15:27:59.09: [ 2877]: <--
[32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r]
> Mar 26
15:27:59.23: [ 2877]: --> [2:OK]
> Mar 26 15:27:59.23: [ 2877]:
<-- [14:AT+FCLASS=2.0\r]
> Mar 26 15:27:59.37: [ 2877]: -->
[2:OK]
> Mar 26 15:27:59.37: [ 2877]: <-- [9:AT+FLO=2\r]
> Mar
26 15:27:59.51: [ 2877]: --> [2:OK]
> Mar 26 15:27:59.51: [ 2877]:
<-- [9:AT+FPP=0\r]
> Mar 26 15:27:59.65: [ 2877]: -->
[2:OK]
> Mar 26 15:27:59.65: [ 2877]: <-- [9:AT+FBO=0\r]
> Mar
26 15:27:59.79: [ 2877]: --> [2:OK]
> Mar 26 15:27:59.79: [ 2877]:
<-- [10:AT+FCT=30\r]
> Mar 26 15:27:59.93: [ 2877]: -->
[2:OK]
> Mar 26 15:27:59.93: [ 2877]: <--
[15:AT+FNR=1,1,1,0\r]
> Mar 26 15:28:00.07: [ 2877]: -->
[2:OK]
> Mar 26 15:28:00.07: [ 2877]: <-- [9:AT+FIE=0\r]
> Mar
26 15:28:00.21: [ 2877]: --> [2:OK]
> Mar 26 15:28:00.21: [ 2877]:
<-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Mar 26 15:28:00.35: [ 2877]:
--> [2:OK]
> Mar 26 15:28:00.35: [ 2877]: <-- [5:ATM1\r]
>
Mar 26 15:28:00.48: [ 2877]: --> [2:OK]
> Mar 26 15:28:00.48: [
2877]: <-- [14:AT+FCLASS=2.0\r]
> Mar 26 15:28:00.72: [ 2877]: -->
[2:OK]
> Mar 26 15:28:00.72: [ 2877]: <-- [9:AT+FLO=2\r]
> Mar
26 15:28:00.96: [ 2877]: --> [2:OK]
> Mar 26 15:28:00.96: [ 2877]:
<-- [9:AT+FPP=0\r]
> Mar 26 15:28:01.20: [ 2877]: -->
[2:OK]
> Mar 26 15:28:01.20: [ 2877]: <-- [9:AT+FBO=0\r]
> Mar
26 15:28:01.44: [ 2877]: --> [2:OK]
> Mar 26 15:28:01.44: [ 2877]:
<-- [10:AT+FCT=30\r]
> Mar 26 15:28:01.68: [ 2877]: -->
[2:OK]
> Mar 26 15:28:01.68: [ 2877]: <--
[15:AT+FNR=1,1,1,0\r]
> Mar 26 15:28:01.92: [ 2877]: -->
[2:OK]
> Mar 26 15:28:01.92: [ 2877]: <-- [9:AT+FIE=0\r]
> Mar
26 15:28:02.16: [ 2877]: --> [2:OK]
> Mar 26 15:28:02.16: [ 2877]:
<-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Mar 26 15:28:02.40: [ 2877]:
--> [2:OK]
> Mar 26 15:28:02.40: [ 2877]: <--
[22:AT+FLI="+852yyyyyyyy"\r]
> Mar 26 15:28:02.64: [ 2877]: -->
[2:OK]
> Mar 26 15:28:02.64: [ 2877]: DIAL xxxx xxxx
> Mar 26 15:28:02.64: [ 2877]: <--
[13:ATDTxxxxxxxx\r]
> Mar 26 15:28:34.00: [ 2877]: -->
[4:+FCO]
> Mar 26 15:28:37.19: [ 2877]: -->
[27:+FCI:" +852 xxxx xxxx"]
> Mar 26
15:28:37.19: [ 2877]: REMOTE CSI "+852 xxxx xxxx"
> Mar 26 15:28:37.19:
[ 2877]: --> [20:+FIS:1,3,0,2,1,0,0,4]
> Mar 26 15:28:37.19: [ 2877]:
--> [2:OK]
> Mar 26 15:28:37.19: [ 2877]: REMOTE best rate 9600
bit/s
> Mar 26 15:28:37.19: [ 2877]: REMOTE max page width 1728 pixels
in 215 mm
> Mar 26 15:28:37.19: [ 2877]: REMOTE max unlimited page
length
> Mar 26 15:28:37.19: [ 2877]: REMOTE best vres 7.7
line/mm
> Mar 26 15:28:37.19: [ 2877]: REMOTE best format 2-D MR
>
Mar 26 15:28:37.19: [ 2877]: REMOTE best 20 ms, 10 ms/scanline
> Mar 26
15:28:37.19: [ 2877]: USE 9600 bit/s
> Mar 26 15:28:37.19: [ 2877]: USE
20 ms, 10 ms/scanline
> Mar 26 15:28:37.19: [ 2877]: SEND file
"docq/doc80.cover;01"
> Mar 26 15:28:37.19: [ 2877]: USE page width 1728
pixels in 215 mm
> Mar 26 15:28:37.19: [ 2877]: USE unlimited page
length
> Mar 26 15:28:37.19: [ 2877]: USE 7.7 line/mm
> Mar 26
15:28:37.19: [ 2877]: USE 1-D MR
> Mar 26 15:28:37.19: [ 2877]: <--
[23:AT+FIS=1,3,0,2,0,0,0,4\r]
> Mar 26 15:28:37.43: [ 2877]: -->
[2:OK]
> Mar 26 15:28:37.43: [ 2877]: <-- [7:AT+FDT\r]
> Mar 26
15:28:37.70: [ 2877]: --> [20:+FCS:1,3,0,2,0,0,0,4]
> Mar 26
15:28:43.28: [ 2877]: --> [7:CONNECT]
> Mar 26 15:28:43.28: [ 2877]:
SEND begin page
> Mar 26 15:28:51.39: [ 2877]: SENT 13856 bytes of
data
> Mar 26 15:28:51.39: [ 2877]: SEND 1D RTC
> Mar 26
15:28:51.39: [ 2877]: SEND end page
> Mar 26 15:28:51.39: [ 2877]: SEND
send MPS (more pages, same document)
> Mar 26 15:29:09.93: [ 2877]:
--> [7:+FHS:52]
> Mar 26 15:29:09.93: [ 2877]: REMOTE HANGUP: No
response to MPS repeated 3 times (code 52)
> Mar 26 15:29:09.93: [
2877]: <-- [5:ATH0\r]
> Mar 26 15:29:10.05: [ 2877]: -->
[2:OK]
> Mar 26 15:29:10.05: [ 2877]: SESSION
END
