|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] AW: Problems receiving faxes continued.
maybe
http://www.hylafax.org/archive/2000-04/msg00312.html
> -----Ursprüngliche Nachricht-----
> Von: hylafax-users-bounce@hylafax.org
> [mailto:hylafax-users-bounce@hylafax.org]Im Auftrag von Russell P.
> Sutherland
> Gesendet am: Donnerstag, 8. März 2001 20:17
> An: hylafax-users@hylafax.org
> Betreff: [hylafax-users] Problems receiving faxes continued.
>
> I modified the logging flags. Here are the error messages
> when receiving.
>
> Mar 06 15:43:31.28: [20990]: SESSION BEGIN 00000058 14169225071
> Mar 06 15:43:31.28: [20990]: <-- [4:ATA\r]
> Mar 06 15:43:42.22: [20990]: --> [5:+FCON]
> Mar 06 15:43:42.22: [20990]: ANSWER: FAX CONNECTION
> Mar 06 15:43:42.22: [20990]: STATE CHANGE: ANSWERING -> RECEIVING
> Mar 06 15:43:42.22: [20990]: MODEM input buffering enabled
> Mar 06 15:43:42.22: [20990]: RECV FAX: begin
> Mar 06 15:43:42.23: [20990]: --> [28:+FTSI:" +14169783787"]
> Mar 06 15:43:42.23: [20990]: REMOTE TSI "+14169783787"
> Mar 06 15:43:42.57: [20990]: --> [21:+FDCS:1,5,0,2,0,0,0,0]
> Mar 06 15:43:42.57: [20990]: REMOTE wants 14400 bit/s
> Mar 06 15:43:42.57: [20990]: REMOTE wants page width 1728 pixels in 215 mm
> Mar 06 15:43:42.57: [20990]: REMOTE wants unlimited page length
> Mar 06 15:43:42.57: [20990]: REMOTE wants 7.7 line/mm
> Mar 06 15:43:42.57: [20990]: REMOTE wants 1-D MR
> Mar 06 15:43:42.57: [20990]: --> [2:OK]
> Mar 06 15:43:42.57: [20990]: <-- [7:AT+FDR\r]
> Mar 06 15:43:46.57: [20990]: --> [5:+FCFR]
> Mar 06 15:43:48.13: [20990]: --> [7:CONNECT]
> Mar 06 15:43:48.13: [20990]: RECV: begin page
> Mar 06 15:43:48.13: [20990]: RECV: send trigger 022
> Mar 06 15:43:48.13: [20990]: <-- data [1]
> Mar 06 15:43:49.07: [20990]: RECV/CQ: Bad 1D pixel count, row 0, got 162, expected 1728
> Mar 06 15:44:05.67: [20990]: RECV/CQ: Invalid BlackTable code word, row 1415, x 1717
> Mar 06 15:44:05.67: [20990]: RECV/CQ: Bad 1D pixel count, row 1415, got 1717, expected 1728
> Mar 06 15:44:05.67: [20990]: RECV: 28688 bytes of data, 1416 total lines
> Mar 06 15:44:05.67: [20990]: --> [12:+FPTS:1,1499]
> Mar 06 15:44:06.92: [20990]: --> [6:+FET:2]
> Mar 06 15:44:06.92: [20990]: RECV recv EOP (no more pages or documents)
> Mar 06 15:44:06.92: [20990]: --> [2:OK]
> Mar 06 15:44:06.92: [20990]: RECV send MCF (message confirmation)
> Mar 06 15:44:06.92: [20990]: RECV FAX (00000058): from +14169783787, page 1 in 0:24, INF, 7.7 line/mm, 1-D MR, 14400 bit/s
> Mar 06 15:44:06.93: [20990]: RECV FAX (00000058): recvq/fax00005.tif from +14169783787, route to <unspecified>, 1 pages in 0:24
> Mar 06 15:44:06.93: [20990]: <-- [7:AT+FDR\r]
> Mar 06 15:44:09.48: [20990]: --> [7:+FHNG:0]
> Mar 06 15:44:09.48: [20990]: REMOTE HANGUP: Normal and proper end of connection (code 0)
> Mar 06 15:44:09.48: [20990]: RECV FAX: bin/faxrcvd "recvq/fax00005.tif" "ttyS3" "00000058" ""
> Mar 06 15:44:09.71: [20990]: RECV FAX: end
> Mar 06 15:44:09.71: [20990]: SESSION END
>
> Once again I'm using a Multitech internal modem:
>
> LT V.90 1.0 MT5634ZPX Internal Data/Fax/Voice Modem Version 8.18j
>
> On an Intel machine, running RH 6.2 and Hylafax 4.1beta3.
>
> --
> Quist Consulting Email: russ@quist.ca
> 219 Donlea Drive Voice: +1.416.696.7600
> Toronto ON M4G 2N1 Fax: +1.416.978.6620
> CANADA WWW: http://www.quist.ca
>
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
> To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
>
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
