Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Using a Cisco AS5300



On Thu, Feb 22, 2001 at 03:07:25PM -0600, Andrew J. Bostaph wrote:
> Is it possible to set up a hylafax server that uses a dial-out enabled
> Cisco AS 5300 via the network as its modems?

At the moment, the answer is "I don't think so".  If Cisco supplies
something that will do a reverse telnet from behind a pty, yes, but
otherwise, faxsend and faxgetty expect to talk AT protocol to a
character device.

In fact, because of handshaking and stuff, I'm not sure even a PTY
interface would be good enough: the daemon might have to use a special
device driver to emulate a physical serial port.

There are one or two sepcial drivers for CAPI/ISDN, but I haven't heard
about anyone running on a 5300.  If there is someone, I suspect they'll
be here.

Cheers,
-- jra
-- 
Jay R. Ashworth                                                jra@baylink.com
Member of the Technical Staff     Baylink
The Suncoast Freenet         The Things I Think
Tampa Bay, Florida        http://baylink.pitas.com             +1 727 804 5015


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services