[hylafax-users] Problems:pager size, number of pages and others

[Pedro_Rocadas/CREDITUS/PT%CREDITUS@creditus.pt]

Hi. i'm trying implement linux here(they are NT believers:)) and they give
me a chance. this is my log output for inbound calls. My big problem is
quoted with $

Feb 14 17:37:30.46: [ 1454]: SESSION BEGIN 00000076 3512222222
Feb 14 17:37:30.46: [ 1454]: <-- [4:ATA\r]
Feb 14 17:37:35.74: [ 1454]: --> [7:CONNECT]
Feb 14 17:37:35.74: [ 1454]: ANSWER: FAX CONNECTION
Feb 14 17:37:35.74: [ 1454]: RECV FAX: begin
Feb 14 17:37:35.75: [ 1454]: <-- data [23]
Feb 14 17:37:35.75: [ 1454]: <-- data [2]
Feb 14 17:37:35.77: [ 1454]: --> [7:CONNECT]
Feb 14 17:37:35.77: [ 1454]: <-- data [10]
Feb 14 17:37:35.77: [ 1454]: <-- data [2]
Feb 14 17:37:37.73: [ 1454]: --> [2:OK]
Feb 14 17:37:37.73: [ 1454]: <-- [9:AT+FRH=3\r]
Feb 14 17:37:38.50: [ 1454]: --> [7:CONNECT]
Feb 14 17:37:39.89: [ 1454]: --> [2:OK]
Feb 14 17:37:39.89: [ 1454]: REMOTE TSI "223333333"
Feb 14 17:37:39.89: [ 1454]: <-- [9:AT+FRH=3\r]
Feb 14 17:37:39.91: [ 1454]: --> [7:CONNECT]
Feb 14 17:37:40.18: [ 1454]: --> [2:OK]

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$Feb 14 17:37:40.18: [ 1454]: REMOTE wants 14400 bit/s
$Feb 14 17:37:40.18: [ 1454]: REMOTE wants page width 1728 pixels in 215 mm
$Feb 14 17:37:40.18: [ 1454]: REMOTE wants unlimited page length
$Feb 14 17:37:40.18: [ 1454]: REMOTE wants 3.85 line/mm
$Feb 14 17:37:40.18: [ 1454]: REMOTE wants 2-D MR
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

Feb 14 17:37:40.18: [ 1454]: RECV training at v.17 14400 bit/s
Feb 14 17:37:40.18: [ 1454]: <-- [11:AT+FRM=145\r]
Feb 14 17:37:41.87: [ 1454]: --> [7:CONNECT]
Feb 14 17:37:43.43: [ 1454]: RECV: TCF 2811 bytes, 3% non-zero, 2697
zero-run
Feb 14 17:37:43.44: [ 1454]: --> [10:NO CARRIER]
Feb 14 17:37:43.44: [ 1454]: DELAY 75 ms
Feb 14 17:37:43.52: [ 1454]: <-- [9:AT+FTH=3\r]
Feb 14 17:37:43.72: [ 1454]: --> [7:CONNECT]
Feb 14 17:37:43.72: [ 1454]: <-- data [3]
Feb 14 17:37:43.72: [ 1454]: <-- data [2]
Feb 14 17:37:44.90: [ 1454]: --> [2:OK]
Feb 14 17:37:44.90: [ 1454]: TRAINING succeeded
Feb 14 17:37:44.90: [ 1454]: RECV FAX (00000076): recvq/fax00013.tif from
222333333, route to <unspecified>, 0 pages in 0:09
Feb 14 17:37:44.92: [ 1454]: RECV FAX: Maximum receive page count exceeded,
job terminated
Feb 14 17:37:44.92: [ 1454]: <-- [9:AT+FTH=3\r]
Feb 14 17:37:44.96: [ 1454]: --> [7:CONNECT]
Feb 14 17:37:44.96: [ 1454]: <-- data [3]
Feb 14 17:37:44.96: [ 1454]: <-- data [2]
Feb 14 17:37:46.14: [ 1454]: --> [2:OK]

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$Feb 14 17:37:46.14: [ 1454]: RECV FAX (00000076): session with 222333333
terminated $abnormally: Maximum receive page count exceeded, job terminated
$Feb 14 17:37:46.15: [ 1454]: RECV FAX: bin/faxrcvd "recvq/fax00013.tif"
"ttyS1" $"00000076" "Maximum receive page count exceeded, job terminated"
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

Feb 14 17:37:46.28: [ 1454]: RECV FAX: end
Feb 14 17:37:46.28: [ 1454]: SESSION END


Any idea? By the way, my modem USRobotics 56k voice faxmodem Hylafax
version 4.1beta1-1rh5

Thanks



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null