Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Problem when receive FAX via Voice Over IP



Hello,
     I use Hylafax 4.1beta2-8rh6.i386.rpm on redhat 6.1. (AZTECH External Modem)
Everything is ok but when i receive FAX via Voice Over IP
(Branch office fax from fax machine through Leased Line over cisco 2611).
It's always error as show in c00001454.txt.
Anyone have face this problem? And any idea to solve this problem?
 
thank you,
vichai
 
ps. sorry for my english
Feb 13 16:08:55.64: [  793]: SESSION BEGIN 00001454 6626586971
Feb 13 16:08:55.64: [  793]: <-- [22:AT+FCLASS=1&H1&I0&R2A\r]
Feb 13 16:09:00.93: [  793]: --> [7:CONNECT]
Feb 13 16:09:00.93: [  793]: ANSWER: FAX CONNECTION
Feb 13 16:09:00.93: [  793]: RECV FAX: begin
Feb 13 16:09:01.08: [  793]: <-- data [23]
Feb 13 16:09:01.08: [  793]: <-- data [2]
Feb 13 16:09:01.11: [  793]: --> [7:CONNECT]
Feb 13 16:09:01.11: [  793]: <-- data [10]
Feb 13 16:09:01.11: [  793]: <-- data [2]
Feb 13 16:09:02.92: [  793]: --> [2:OK]
Feb 13 16:09:02.92: [  793]: <-- [9:AT+FRH=3\r]
Feb 13 16:09:06.02: [  793]: --> [0:]
Feb 13 16:09:06.02: [  793]: MODEM <Empty line>
Feb 13 16:09:06.02: [  793]: <-- data [1]
Feb 13 16:09:06.03: [  793]: --> [2:OK]
Feb 13 16:09:06.03: [  793]: DELAY 4000 ms
Feb 13 16:09:10.03: [  793]: <-- [9:AT+FTH=3\r]
Feb 13 16:09:10.07: [  793]: --> [7:CONNECT]
Feb 13 16:09:10.07: [  793]: <-- data [23]
Feb 13 16:09:10.07: [  793]: <-- data [2]
Feb 13 16:09:10.10: [  793]: --> [7:CONNECT]
Feb 13 16:09:10.10: [  793]: <-- data [10]
Feb 13 16:09:10.10: [  793]: <-- data [2]
Feb 13 16:09:12.15: [  793]: --> [2:OK]
Feb 13 16:09:12.15: [  793]: <-- [9:AT+FRH=3\r]
Feb 13 16:09:14.24: [  793]: --> [7:CONNECT]
Feb 13 16:09:15.66: [  793]: --> [2:OK]
Feb 13 16:09:15.66: [  793]: REMOTE TSI "074 247710"
Feb 13 16:09:15.66: [  793]: <-- [9:AT+FRH=3\r]
Feb 13 16:09:15.68: [  793]: --> [7:CONNECT]
Feb 13 16:09:16.01: [  793]: --> [2:OK]
Feb 13 16:09:16.01: [  793]: REMOTE wants 9600 bit/s
Feb 13 16:09:16.01: [  793]: REMOTE wants page width 1728 pixels in 215 mm
Feb 13 16:09:16.01: [  793]: REMOTE wants unlimited page length 
Feb 13 16:09:16.01: [  793]: REMOTE wants 3.85 line/mm
Feb 13 16:09:16.01: [  793]: REMOTE wants 2-D MR
Feb 13 16:09:16.01: [  793]: RECV training at v.29 9600 bit/s
Feb 13 16:09:16.01: [  793]: <-- [10:AT+FRM=96\r]
Feb 13 16:09:16.42: [  793]: --> [7:CONNECT]
Feb 13 16:09:18.09: [  793]: RECV: TCF 2013 bytes, 0% non-zero, 0 zero-run
Feb 13 16:09:18.09: [  793]: RECV: reject TCF (zero run too short, min 1200)
Feb 13 16:09:18.10: [  793]: --> [10:NO CARRIER]
Feb 13 16:09:18.10: [  793]: DELAY 75 ms
Feb 13 16:09:18.18: [  793]: <-- [9:AT+FTH=3\r]
Feb 13 16:09:18.38: [  793]: --> [7:CONNECT]
Feb 13 16:09:18.38: [  793]: <-- data [3]
Feb 13 16:09:18.38: [  793]: <-- data [2]
Feb 13 16:09:19.56: [  793]: --> [2:OK]
Feb 13 16:09:19.56: [  793]: TRAINING failed
Feb 13 16:09:19.56: [  793]: <-- [9:AT+FRH=3\r]
Feb 13 16:09:21.88: [  793]: --> [7:CONNECT]
Feb 13 16:09:23.44: [  793]: --> [2:OK]
Feb 13 16:09:23.45: [  793]: REMOTE TSI "074 247710"
Feb 13 16:09:23.45: [  793]: <-- [9:AT+FRH=3\r]
Feb 13 16:09:23.48: [  793]: --> [7:CONNECT]
Feb 13 16:09:28.48: [  793]: <-- data [1]
Feb 13 16:09:28.49: [  793]: --> [2:OK]
Feb 13 16:09:28.49: [  793]: DELAY 4000 ms
Feb 13 16:09:32.49: [  793]: <-- [9:AT+FTH=3\r]
Feb 13 16:09:32.53: [  793]: --> [7:CONNECT]
Feb 13 16:09:32.53: [  793]: <-- data [23]
Feb 13 16:09:32.53: [  793]: <-- data [2]
Feb 13 16:09:32.56: [  793]: --> [7:CONNECT]
Feb 13 16:09:32.56: [  793]: <-- data [10]
Feb 13 16:09:32.56: [  793]: <-- data [2]
Feb 13 16:09:34.61: [  793]: --> [2:OK]
Feb 13 16:09:34.61: [  793]: <-- [9:AT+FRH=3\r]
Feb 13 16:09:35.83: [  793]: --> [10:NO CARRIER]
Feb 13 16:09:35.83: [  793]: MODEM No carrier
Feb 13 16:09:35.83: [  793]: DELAY 4000 ms
Feb 13 16:09:39.83: [  793]: <-- [9:AT+FTH=3\r]
Feb 13 16:09:40.03: [  793]: --> [7:CONNECT]
Feb 13 16:09:40.03: [  793]: <-- data [23]
Feb 13 16:09:40.03: [  793]: <-- data [2]
Feb 13 16:09:40.06: [  793]: --> [7:CONNECT]
Feb 13 16:09:40.06: [  793]: <-- data [10]
Feb 13 16:09:40.06: [  793]: <-- data [2]
Feb 13 16:09:42.11: [  793]: --> [2:OK]
Feb 13 16:09:42.11: [  793]: <-- [9:AT+FRH=3\r]
Feb 13 16:09:45.21: [  793]: --> [0:]
Feb 13 16:09:45.21: [  793]: MODEM <Empty line>
Feb 13 16:09:45.21: [  793]: <-- data [1]
Feb 13 16:09:45.22: [  793]: --> [2:OK]
Feb 13 16:09:45.22: [  793]: RECV FAX: RSPREC invalid response received
Feb 13 16:09:45.22: [  793]: RECV FAX: end
Feb 13 16:09:45.22: [  793]: SESSION END

config.ttyS44



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services