[hylafax-users] Unspecified Transmit Phase B error

To: hylafax-users@hylafax.org
Subject: [hylafax-users] Unspecified Transmit Phase B error
From: David Ronis <ronis@ronispc.chem.mcgill.ca>
Reply-To: ronis@onsager.chem.mcgill.ca
Date: Tue, 6 Feb 2001 14:01:59 -0500


I'm running the current CVS of hylafax on a
i686--linux-2.4.1--glibc-2.2.1, box with a zyxel 56K omniplus modem.
I run faxgetty.

Overseas faxes behave intermittently, often failing with 

		  Unspecified Transmit Phase B error

(I've attached a log below as well as my modem configuration file).
If I retry some time later it sometimes works and local faxes seem to
work fine.

Any idea what's going on or how to fix things?


David

Feb 06 12:16:50.38: [  684]: SESSION BEGIN 00000181 1514901197226710144
Feb 06 12:16:50.38: [  684]: SEND FAX: JOB 11 DEST 9-011-972-2-671-0144 COMMID 00000181
Feb 06 12:16:50.38: [  684]: DELAY 2600 ms
Feb 06 12:16:52.98: [  684]: <-- [4:ATZ\r]
Feb 06 12:16:53.04: [  684]: --> [2:OK]
Feb 06 12:16:53.04: [  684]: <-- [26:AT&F&N0&D2&C1E0V1Q0S0=0H0\r]
Feb 06 12:16:53.07: [  684]: --> [25:AT&F&N0&D2&C1E0V1Q0S0=0H0]
Feb 06 12:16:53.07: [  684]: --> [2:OK]
Feb 06 12:16:53.07: [  684]: <-- [12:ATS8=2S7=60\r]
Feb 06 12:16:53.08: [  684]: --> [2:OK]
Feb 06 12:16:53.08: [  684]: <-- [14:AT+FCLASS=2.0\r]
Feb 06 12:16:53.09: [  684]: --> [2:OK]
Feb 06 12:16:53.09: [  684]: <-- [9:AT+FLO=2\r]
Feb 06 12:16:53.11: [  684]: --> [2:OK]
Feb 06 12:16:53.11: [  684]: <-- [9:AT+FPP=0\r]
Feb 06 12:16:53.13: [  684]: --> [2:OK]
Feb 06 12:16:53.13: [  684]: <-- [9:AT+FBO=0\r]
Feb 06 12:16:53.15: [  684]: --> [2:OK]
Feb 06 12:16:53.15: [  684]: <-- [10:AT+FCT=30\r]
Feb 06 12:16:53.16: [  684]: --> [2:OK]
Feb 06 12:16:53.16: [  684]: <-- [15:AT+FNR=1,1,1,1\r]
Feb 06 12:16:53.18: [  684]: --> [2:OK]
Feb 06 12:16:53.18: [  684]: <-- [9:AT+FIE=0\r]
Feb 06 12:16:53.19: [  684]: --> [2:OK]
Feb 06 12:16:53.19: [  684]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Feb 06 12:16:53.21: [  684]: --> [2:OK]
Feb 06 12:16:53.21: [  684]: <-- [7:ATL0M1\r]
Feb 06 12:16:53.23: [  684]: --> [2:OK]
Feb 06 12:16:53.23: [  684]: <-- [14:AT+FCLASS=2.0\r]
Feb 06 12:16:53.35: [  684]: --> [2:OK]
Feb 06 12:16:53.35: [  684]: <-- [9:AT+FLO=2\r]
Feb 06 12:16:53.47: [  684]: --> [2:OK]
Feb 06 12:16:53.47: [  684]: <-- [9:AT+FPP=0\r]
Feb 06 12:16:53.59: [  684]: --> [2:OK]
Feb 06 12:16:53.59: [  684]: <-- [9:AT+FBO=0\r]
Feb 06 12:16:53.70: [  684]: --> [2:OK]
Feb 06 12:16:53.70: [  684]: <-- [10:AT+FCT=30\r]
Feb 06 12:16:53.82: [  684]: --> [2:OK]
Feb 06 12:16:53.82: [  684]: <-- [15:AT+FNR=1,1,1,1\r]
Feb 06 12:16:53.93: [  684]: --> [2:OK]
Feb 06 12:16:53.93: [  684]: <-- [9:AT+FIE=0\r]
Feb 06 12:16:54.05: [  684]: --> [2:OK]
Feb 06 12:16:54.05: [  684]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Feb 06 12:16:54.17: [  684]: --> [2:OK]
Feb 06 12:16:54.17: [  684]: <-- [28:AT+FLI="Ronis Office Modem"\r]
Feb 06 12:16:54.28: [  684]: --> [2:OK]
Feb 06 12:16:54.28: [  684]: DIAL 901197226710144
Feb 06 12:16:54.28: [  684]: <-- [20:ATDT901197226710144\r]
Feb 06 12:17:15.28: [  684]: --> [4:+FCO]
Feb 06 12:17:16.17: [  684]: --> [61:+FNF:"00 00 00 0D 00 01 30 0B 83 1C 00 00 00 00 00 00 00 04 "]
Feb 06 12:17:16.17: [  684]: REMOTE NSF ""00 00 00 0D 00 01 30 0B 83 1C 00 00 00 00 00 00 00 04 ""
Feb 06 12:17:16.17: [  684]: NSF remote fax equipment: unknown 
Feb 06 12:17:16.86: [  684]: --> [88:+FNF:"00 00 00 0D 00 02 14 33 33 33 33 33 33 33 34 34 34 58 41 46 41 54 4C 4F 4E 49 4D "]
Feb 06 12:17:16.86: [  684]: REMOTE NSF ""00 00 00 0D 00 02 14 33 33 33 33 33 33 33 34 34 34 58 41 46 41 54 4C 4F 4E 49 4D ""
Feb 06 12:17:16.86: [  684]: NSF remote fax equipment: unknown 
Feb 06 12:17:17.25: [  684]: --> [27:+FCI:"             972+522"]
Feb 06 12:17:17.25: [  684]: REMOTE CSI "972+522"
Feb 06 12:17:17.25: [  684]: --> [20:+FIS:1,5,0,2,1,0,0,1]
Feb 06 12:17:17.25: [  684]: --> [2:OK]
Feb 06 12:17:17.25: [  684]: REMOTE best rate 14400 bit/s
Feb 06 12:17:17.25: [  684]: REMOTE max page width 1728 pixels in 215 mm
Feb 06 12:17:17.25: [  684]: REMOTE max unlimited page length 
Feb 06 12:17:17.25: [  684]: REMOTE best vres 7.7 line/mm
Feb 06 12:17:17.25: [  684]: REMOTE best format 2-D MR
Feb 06 12:17:17.25: [  684]: REMOTE best 5 ms/scanline
Feb 06 12:17:17.25: [  684]: USE 14400 bit/s
Feb 06 12:17:17.25: [  684]: USE 5 ms/scanline
Feb 06 12:17:17.25: [  684]: SEND file "docq/doc11.cover;31"
Feb 06 12:17:17.25: [  684]: USE page width 1728 pixels in 215 mm
Feb 06 12:17:17.25: [  684]: USE unlimited page length 
Feb 06 12:17:17.25: [  684]: USE 7.7 line/mm
Feb 06 12:17:17.25: [  684]: USE 1-D MR
Feb 06 12:17:17.25: [  684]: <-- [23:AT+FIS=1,5,0,2,0,0,0,1\r]
Feb 06 12:17:17.37: [  684]: --> [2:OK]
Feb 06 12:17:17.37: [  684]: <-- [7:AT+FDT\r]
Feb 06 12:18:09.51: [  684]: --> [7:+FHS:20]
Feb 06 12:18:09.51: [  684]: REMOTE HANGUP: Unspecified Transmit Phase B error (code 20)
Feb 06 12:18:09.51: [  684]: --> [2:OK]
Feb 06 12:21:09.51: [  684]: MODEM <Timeout>
Feb 06 12:21:09.51: [  684]: SEND: Unspecified Transmit Phase B error; Giving up after 3 attempts to send same page "docq/doc11.cover;31", dirnum 0
Feb 06 12:21:09.51: [  684]: <-- [5:ATH0\r]
Feb 06 12:21:09.65: [  684]: --> [2:OK]
Feb 06 12:21:09.65: [  684]: SESSION END

# $Id: class2.0,v 1.2 1999/01/10 09:09:37 robert Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
# 
# Permission to use, copy, modify, distribute, and sell this software and 
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
# 
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
# 
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
# OF THIS SOFTWARE.
#

#
# Generic Class 2.0 modem configuration.
#
# EDIT THIS CONFIGURATION TO REFLECT YOUR SETUP
#
CountryCode:		1
AreaCode:		514
FAXNumber:		+1.514.398.5099
LongDistancePrefix:	1
InternationalPrefix:	011
DialStringRules:	etc/dialrules
ServerTracing:		1
SessionTracing:		11
RecvFileMode:		0644
LogFileMode:		0644
DeviceMode:		0660
RingsBeforeAnswer:	5
SpeakerVolume:		quiet
GettyArgs:		"-h %l %s vt100"
VGettyArgs:		"-s %s -x 10 %l vt100"
LocalIdentifier:	"Ronis Office Modem"
TagLineFont:		etc/lutRS18.pcf
TagLineFormat:		"From %%l|%c|Page %%p of %%t"
MaxRecvPages:		25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:		Class2.0	# use this to supply a hint
#ModemRate:		19200		# max rate for DCE-DTE communication
ModemRate:		115200		# max rate for DCE-DTE communication
ModemFlowControl:	RTSCTS		# XON/XOFF flow control assumed
#ModemSetupDTRCmd:	AT&D2		# setup so DTR drop resets modem
#ModemSetupDCDCmd:	AT&C1		# setup so DCD reflects carrier (or not)
#
# We normally append the "@" symbol to the dial string so that
# the modem will wait 5 seconds before attempting to connect
# and return result codes that distinguish between no carrier
# and no answer.  This makes it possible to avoid problems with
# repeatedly dialing a number that doesn't have a fax machine
# (kudos to Stuart Lynne for this trick.)
#
# NB: If you need to prefix phone numbers to get through a PBX,
#     put it in the ModemDialCmd; e.g. "DT9%s@".
#
ModemDialCmd:		ATDT%s		# T for tone dialing, @ for silence
#
# Other possible configuration stuff.  The default strings are
# shown below.  Only those that are different from the defaults
# need to be included in the configuration file.
#
ModemResetCmds:	"AT&F&N0&D2&C1"	# stuff to do when modem is reset
#ModemAnswerCmd:	ATA		# use this to answer phone
#ModemNoFlowCmd:	AT&K		# disable flow control cmd
#ModemHardFlowCmd:	AT&K3		# hardware flow control cmd
#ModemSoftFlowCmd:	AT&K4		# software flow control cmd
#ModemNoAutoAnswerCmd:	ATS0=0		# disable auto-answer
#
# Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH.
# Note that we both turn the speaker on/off and set volume.
#
#ModemSetVolumeCmd:	"ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
#ModemEchoOffCmd:	ATE0		# disable command echo
#ModemVerboseResultsCmd:	ATV1		# enable verbose command results
#ModemResultCodesCmd:	ATQ0		# enable result codes
#ModemOnHookCmd:		ATH0		# place phone on hook (hangup)
#ModemSoftResetCmd:	ATZ		# do soft reset of modem
#ModemWaitTimeCmd:	ATS7=60		# wait 60 seconds for carrier
#ModemCommaPauseTimeCmd:	ATS8=2		# comma pause time is 2 seconds
#ModemRecvFillOrder:	LSB2MSB		# bit order of received facsimile
#ModemSendFillOrder:	LSB2MSB		# bit order modem expects for transmit
#
# Configuration parameters for Class 2.0 modems.
#
ModemSetupAACmd:	AT+FAA=1	# enable in current class
#AdaptiveAnswer:		on
#AnswerRotary:         "voice data fax"
Class2Cmd:		AT+FCLASS=2.0	# command to enter class 2.0
Class2BORCmd:		AT+FBO=0	# bit order for phase B/C/D (direct)
Class2CQCmd:		""		# commands to enable copy quality proc.
Class2AbortCmd:		AT+FKS		# abort session command
Class2CQQueryCmd:	AT+FCQ=?	# query for copy quality capabilities
Class2DCCQueryCmd:	AT+FCC=?	# query for modem capabilities
Class2TBCCmd:		AT+FPP=0	# setup stream mode
Class2CRCmd:		AT+FCR=1	# enable capability to receive
Class2PHCTOCmd:		AT+FCT=30	# set phase C timeout parameter
Class2BUGCmd:		AT+FBU=1	# enable HDLC frame tracing
Class2LIDCmd:		AT+FLI		# set local identifier command
Class2DCCCmd:		AT+FCC		# set modem capabilities command
Class2DISCmd:		AT+FIS		# set session parameters command
Class2DDISCmd:		""		# disable pre-dial DIS command hack
Class2CIGCmd:		AT+FPI		# set polling identifier command
Class2NRCmd:		AT+FNR=1,1,1,1	# setup status reporting command
Class2PIECmd:		AT+FIE=0	# disable interrupt-enable command
Class2PTSCmd:		AT+FPS		# set post-page status command
Class2SPLCmd:		AT+FSP		# set polling indicator command
Class2NFLOCmd:		AT+FLO=0	# set no flow control command
Class2SFLOCmd:		AT+FLO=1	# set software flow control command
Class2HFLOCmd:		AT+FLO=2	# set hardware flow control command

Follow-Ups:
- Re: [hylafax-users] Unspecified Transmit Phase B error
  - From: Lee Howard <faxguy@deanox.com>

Prev by Date: [hylafax-users] Convert Document error
Next by Date: [hylafax-users] faysetup
Prev by thread: [hylafax-users] Convert Document error
Next by thread: Re: [hylafax-users] Unspecified Transmit Phase B error
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services