Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] RECV: 0 total lines, 0 bad lines, 0 consecutive bad lines



Hello,

         I have been searching the HylaFAX site for an answer to the 
following problem. In a receiving session, I always get the following 
message "RECV: 0 total lines, 0 bad lines, 0 consecutive bad lines" for the 
data. I have checked many times my configuration and I really can not get 
rid of this problem.
         I use the HylaFax version 4.1 beta 2 on a Linux Mandrake 7.1 box 
with a HAYES ACCURA 336 external modem. Here below, you will find the 
corresponding log of an inbound session.


  Jan 29 13:52:11.11: [  788]: SESSION BEGIN 00000007 3242597412
Jan 29 13:52:11.11: [  788]: <-- [4:ATA\r]
Jan 29 13:52:28.96: [  788]: --> [5:+FCON]
Jan 29 13:52:28.96: [  788]: ANSWER: FAX CONNECTION
Jan 29 13:52:28.96: [  788]: RECV FAX: begin
Jan 29 13:52:30.62: [  788]: --> [28:+FTSI:"        32 4 2597410"]
Jan 29 13:52:30.62: [  788]: REMOTE TSI "32 4 2597410"
Jan 29 13:52:30.96: [  788]: --> [21:+FDCS:0,3,0,2,0,0,0,0]
Jan 29 13:52:30.97: [  788]: REMOTE wants 9600 bit/s
Jan 29 13:52:30.97: [  788]: REMOTE wants page width 1728 pixels in 215 mm
Jan 29 13:52:30.97: [  788]: REMOTE wants unlimited page length
Jan 29 13:52:30.97: [  788]: REMOTE wants 3.85 line/mm
Jan 29 13:52:30.97: [  788]: REMOTE wants 1-D MR
Jan 29 13:52:30.97: [  788]: --> [2:OK]
Jan 29 13:52:30.98: [  788]: <-- [7:AT+FDR\r]
Jan 29 13:52:35.40: [  788]: --> [5:+FCFR]
Jan 29 13:52:35.40: [  788]: --> [21:+FDCS:0,3,0,2,0,0,0,0]
Jan 29 13:52:35.40: [  788]: REMOTE wants 9600 bit/s
Jan 29 13:52:35.40: [  788]: REMOTE wants page width 1728 pixels in 215 mm
Jan 29 13:52:35.40: [  788]: REMOTE wants unlimited page length
Jan 29 13:52:35.40: [  788]: REMOTE wants 3.85 line/mm
Jan 29 13:52:35.40: [  788]: REMOTE wants 1-D MR
Jan 29 13:52:35.40: [  788]: --> [7:CONNECT]
Jan 29 13:52:35.40: [  788]: RECV: begin page
Jan 29 13:52:35.40: [  788]: RECV: send trigger 021
Jan 29 13:52:35.40: [  788]: <-- data [1]
Jan 29 13:53:02.98: [  788]: RECV: 0 total lines, 0 bad lines, 0 
consecutive bad lines

=> Looks strange, isn't it ?

Jan 29 13:53:02.98: [  788]: --> [7:+FPTS:1]
Jan 29 13:53:08.47: [  788]: --> [6:+FET:2]
Jan 29 13:53:08.47: [  788]: RECV recv EOP (no more pages or documents)
Jan 29 13:53:08.47: [  788]: --> [2:OK]
Jan 29 13:53:08.47: [  788]: RECV send MCF (message confirmation)
Jan 29 13:53:08.47: [  788]: RECV FAX (00000007): from 32 4 2597410, page 1 
in 0:38, INF, 3.85 line/mm, 1-D MR
Jan 29 13:53:08.47: [  788]: RECV FAX (00000007): recvq/fax00007.tif from 
32 4 2597410, route to <unspecified>, 1 pages in 0:40
Jan 29 13:53:08.47: [  788]: <-- [7:AT+FDR\r]
Jan 29 13:53:11.83: [  788]: --> [7:+FHNG:0]
Jan 29 13:53:11.83: [  788]: REMOTE HANGUP: Normal and proper end of 
connection (code 0)
Jan 29 13:53:11.83: [  788]: RECV FAX: bin/faxrcvd "recvq/fax00007.tif" 
"ttyS1" "00000007" ""
Jan 29 13:53:12.93: [  788]: RECV FAX: end
Jan 29 13:53:12.93: [  788]: SESSION END

Many thanks in advance,

Luc.







____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services