|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] faxrcvd => Fax send per Mime E-Mail
This works for us:
Please review / modify for YOUR site requirements.
ken
In /var/spool/fax/bin:
[root@twgrh1 bin]# cat faxrcvd
#! /bin/sh
# $Id: faxrcvd.sh,v 1.1.1.1 1998/10/12 20:47:48 root Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names
of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#
#
# faxrcvd file devID commID error-msg
#
if [ $# != 4 ]; then
echo "Usage: $0 file devID commID error-msg"
exit 1
fi
test -f etc/setup.cache || {
SPOOL=`pwd`
cat<<EOF
FATAL ERROR: $SPOOL/etc/setup.cache is missing!
The file $SPOOL/etc/setup.cache is not present. This
probably means the machine has not been setup using the faxsetup(1M)
command. Read the documentation on setting up HylaFAX before you
startup a server system.
EOF
exit 1
}
. etc/setup.cache
INFO=$SBIN/faxinfo
FAX2PS=$TIFFBIN/fax2ps
TOADDR=FaxMaster
#
# There is no good portable way to find out the fully qualified
# domain name (FQDN) of the host or the TCP port for the hylafax
# service so we fudge here. Folks may want to tailor this to
# their needs; e.g. add a domain or use localhost so the loopback
# interface is used.
#
HOSTNAME=`hostname` # XXX no good way to find FQDN
PORT=4559 # XXX no good way to lookup service
#
# Define host's FQDN and Domain Name
. /usr/local/bin/twg_setFQDN
# echo "FQDN: "$FQDN > /tmp/kaa
# echo "DOMAINNAME: "$DOMAINNAME >> /tmp/kaa
# echo "HOSTNAME: "$HOSTNAME >> /tmp/kaa
# If Domain name exists, then append it to HOSTNAME
if [ -n "$DOMAINNAME" ]; then
HOSTNAME=$HOSTNAME."$DOMAINNAME"
fi
FILE="$1"
DEVICE="$2"
COMMID="$3"
MSG="$4"
# Define Printer to use for printing received faxes (if desired)
FAXPRINTER=twgactg3
if [ -f $FILE ]; then
#
# Check the sender's TSI and setup to dispatch
# facsimile received from well-known senders.
#
SENDER="`$INFO $FILE | $AWK -F: '/Sender/ { print $2 }' 2>/dev/null`"
SENDTO=
if [ -f etc/FaxDispatch ]; then
. etc/FaxDispatch # NB: FaxDispatch sets SENDTO based on
$SENDER
fi
(echo "To: $TOADDR"
echo "From: The HylaFAX Receive Agent <fax>"
echo "Subject: facsimile received from $SENDER";
echo ""
# echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"; $INFO -n $FILE
# Use SAMBA Share and Kodak Imaging on Client to View Fax Image
echo "$FILE (file://$HOSTNAME/$FILE):"; $INFO -n $FILE
echo "ReceivedOn: $DEVICE"
if [ "$MSG" ]; then
echo ""
echo "The full document was not received because:"
echo ""
echo " $MSG"
echo ""
echo " ---- Transcript of session follows ----"
echo ""
if [ -f log/c$COMMID ]; then
$SED -e '/-- data/d' \
-e '/start.*timer/d' -e '/stop.*timer/d' \
log/c$COMMID
elif [ -n "$COMMID" ]; then
echo " No transcript available (CommID c$COMMID)."
else
echo " No transcript available."
fi
else
echo "CommID: c$COMMID (ftp://$HOSTNAME:$PORT/log/c$COMMID)"
# echo "CommID: c$COMMID (file://$HOSTNAME/log/c$COMMID)"
fi
if [ -n "$SENDTO" ]; then
echo ""
echo "The facsimile was automatically dispatched to: $SENDTO."
fi
) | 2>&1 $SENDMAIL -ffax -oi $TOADDR
if [ -n "$SENDTO" ]; then
(MIMEBOUNDARY="NextPart$$"
echo "Mime-Version: 1.0"
echo "Content-Type: Multipart/Mixed; Boundary=\"$MIMEBOUNDARY\""
echo "Content-Transfer-Encoding: 7bit"
echo "To: $SENDTO"
echo "From: The HylaFAX Receive Agent <fax>"
echo "Subject: facsimile received from $SENDER";
echo ""
echo "--$MIMEBOUNDARY"
echo "Content-Type: text/plain; charset=us-ascii"
echo "Content-Transfer-Encoding: 7bit"
echo ""
# echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"; $INFO -n $FILE
# Use SAMBA Share and Kodak Imaging on Client to View Fax Image
echo "$FILE (file://$HOSTNAME/$FILE):"; $INFO -n $FILE
echo "ReceivedOn: $DEVICE"
if [ "$MSG" ]; then
echo ""
echo "The full document was not received because:"
echo ""
echo " $MSG"
echo ""
echo " ---- Transcript of session follows ----"
echo ""
if [ -f log/c$COMMID ]; then
$SED -e '/-- data/d' \
-e '/start.*timer/d' -e '/stop.*timer/d' \
log/c$COMMID
elif [ -n "$COMMID" ]; then
echo " No transcript available (CommID c$COMMID)."
else
echo " No transcript available."
fi
else
echo "CommID: c$COMMID (ftp://$HOSTNAME:$PORT/log/c$COMMID)"
# echo "CommID: c$COMMID (file://$HOSTNAME/log/c$COMMID)"
fi
echo ""
echo "--$MIMEBOUNDARY"
echo "Content-Type: application/postscript"
echo "Content-Description: FAX document"
echo "Content-Transfer-Encoding: 7bit"
echo ""
$FAX2PS $FILE 2>/dev/null
echo ""
echo "--$MIMEBOUNDARY--"
) | 2>&1 $SENDMAIL -ffax -oi $SENDTO
else
#
# No Known Email Delivery Address - Send Fax to Desired Printer
#
# $FAX2PS -H 10.5 -S $FILE | lpr -P $FAXPRINTER -v
# $FAX2PS -H 10.5 -S $FILE | lpr -P $FAXPRINTER
# $FAX2PS $FILE | lpr -P $FAXPRINTER
# $TIFFBIN/tiff2ps -a $FILE | lpr -P $FAXPRINTER
$FAX2PS -H 10.15 -S $FILE | lpr -P $FAXPRINTER
fi
else
#
# Generate notification mail for a failed attempt.
#
(echo "To: $TOADDR"
echo "From: The HylaFAX Receive Agent <fax>"
echo "Subject: facsimile not received"
echo ""
echo "An attempt to receive facsimile on $DEVICE failed because:"
echo ""
echo " $MSG"
echo ""
echo " ---- Transcript of session follows ----"
echo ""
if [ -f log/c$COMMID ]; then
$SED -e '/-- data/d' \
-e '/start.*timer/d' -e '/stop.*timer/d' \
log/c$COMMID
elif [ -n "$COMMID" ]; then
echo " No transcript available (CommID c$COMMID)."
else
echo " No transcript available."
fi
) | 2>&1 $SENDMAIL -ffax -oi $TOADDR
fi
-----Original Message-----
From: Thomas Reiß [mailto:Thomas.Reiss@TheresienKH-Nbg.de]
Sent: Monday, January 22, 2001 9:21 AM
To: hylafax-users@hylafax.org
Subject: [hylafax-users] faxrcvd => Fax send per Mime E-Mail
Hello,
I try to send incoming Fax as an mime-codet tif File per E-Mail.
So i changed bin/faxrcvd to:
--cut
echo ""
echo "--$MIMEBOUNDARY"
echo ""
echo "Content-Type: application/octet-stream; name=Fax.tif"
echo "Content-Transfer-Encoding: base64"
echo "Content-Disposition: attachment; name=fax.tif"
echo""
$FAX2PS $FAX Fax.tif 2>/dev/nul
echo ""
echo "--$MIMEBOUNDARY--"
--cut
where
FAX2PS="/usr/bin/uuencode -m"
But i dosn't work.
Can anybody tell my why ? (Im a beginner to understand the mime encoding !)
Thanks
Thomas
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
