|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] disconnect while Receive
>>Hello!
>>
>>I use debian potato, with hylafax-server 4.0.2-14. Acorp 56k External
>>modem Class 1 mode
>>The problem, that the modem disconnect while its receiving the fax. It
>>usually happen when new page beginning.
>>In the log no error seems.
>>What`s the matter?
>
>How about providing the transmission log for the session?
Here is the session log:
Jan 16 14:16:45.62: [ 1008]: SESSION BEGIN 00000151 3612162242
Jan 16 14:16:45.62: [ 1008]: <-- [4:ATA\r]
Jan 16 14:16:51.83: [ 1008]: --> [7:CONNECT]
Jan 16 14:16:51.83: [ 1008]: ANSWER: FAX CONNECTION
Jan 16 14:16:51.84: [ 1008]: RECV FAX: begin
Jan 16 14:16:51.84: [ 1008]: <-- data [23]
Jan 16 14:16:51.84: [ 1008]: <-- data [2]
Jan 16 14:16:53.51: [ 1008]: --> [7:CONNECT]
Jan 16 14:16:53.51: [ 1008]: <-- data [10]
Jan 16 14:16:53.51: [ 1008]: <-- data [2]
Jan 16 14:16:54.05: [ 1008]: --> [2:OK]
Jan 16 14:16:54.05: [ 1008]: <-- [9:AT+FRH=3\r]
Jan 16 14:16:54.59: [ 1008]: --> [7:CONNECT]
Jan 16 14:16:56.05: [ 1008]: --> [2:OK]
Jan 16 14:16:56.05: [ 1008]: REMOTE TSI "36 1 204 66 42"
Jan 16 14:16:56.05: [ 1008]: <-- [9:AT+FRH=3\r]
Jan 16 14:16:56.07: [ 1008]: --> [7:CONNECT]
Jan 16 14:16:56.31: [ 1008]: --> [2:OK]
Jan 16 14:16:56.31: [ 1008]: REMOTE wants 9600 bit/s
Jan 16 14:16:56.31: [ 1008]: REMOTE wants page width 1728 pixels in 215 mm
Jan 16 14:16:56.31: [ 1008]: REMOTE wants unlimited page length
Jan 16 14:16:56.31: [ 1008]: REMOTE wants 3.85 line/mm
Jan 16 14:16:56.31: [ 1008]: REMOTE wants 2-D MR
Jan 16 14:16:56.32: [ 1008]: RECV training at v.29 9600 bit/s
Jan 16 14:16:56.32: [ 1008]: <-- [10:AT+FRM=96\r]
Jan 16 14:16:56.66: [ 1008]: --> [7:CONNECT]
Jan 16 14:16:58.33: [ 1008]: RECV: TCF 1983 bytes, 2% non-zero, 1936 zero-run
Jan 16 14:16:58.34: [ 1008]: --> [10:NO CARRIER]
Jan 16 14:16:58.34: [ 1008]: DELAY 75 ms
Jan 16 14:16:58.42: [ 1008]: <-- [9:AT+FTH=3\r]
Jan 16 14:16:58.47: [ 1008]: --> [7:CONNECT]
Jan 16 14:16:58.47: [ 1008]: <-- data [3]
Jan 16 14:16:58.47: [ 1008]: <-- data [2]
Jan 16 14:16:59.78: [ 1008]: --> [2:OK]
Jan 16 14:16:59.78: [ 1008]: TRAINING succeeded
Jan 16 14:16:59.79: [ 1008]: <-- [10:AT+FRM=96\r]
Jan 16 14:17:00.58: [ 1008]: --> [7:CONNECT]
Jan 16 14:17:00.58: [ 1008]: RECV: begin page
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
