|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Many MPS/EOP errors
I often have trouble succeeding to send a fax the first attempt,
using HylaFAX4.1b2 on a Linux RedHat 5.2 machine with kernel 2.2.14.
The modem I use is a internal Dynalink model 1428VQH-T which has an
AT&T HSM288xCF/CL2 chip. I use it as a fax class 1 with rtscts (hardware)
handshake.
What happens is that the first and/or second attempts to send a fax
usually fail with a "No response to MPS or EOP repeated 3 tries" error.
This is what my log looks like:
Jan 06 00:48:18.02: [ 2085]: SEND FAX: JOB 20 DEST 0534345xxx COMMID
00000031
Jan 06 00:48:18.02: [ 2085]: DELAY 2600 ms
Jan 06 00:48:20.62: [ 2085]: <-- [15:ATE0V1Q0S0=0H0\r]
Jan 06 00:48:20.74: [ 2085]: --> [2:OK]
Jan 06 00:48:20.74: [ 2085]: <-- [21:ATS8=2S7=60&K3&D2&C1\r]
Jan 06 00:48:20.86: [ 2085]: --> [2:OK]
Jan 06 00:48:20.86: [ 2085]: <-- [12:AT+FCLASS=1\r]
Jan 06 00:48:20.98: [ 2085]: --> [2:OK]
Jan 06 00:48:20.98: [ 2085]: <-- [5:ATM0\r]
Jan 06 00:48:21.09: [ 2085]: --> [2:OK]
Jan 06 00:48:21.09: [ 2085]: <-- [12:AT+FCLASS=1\r]
Jan 06 00:48:21.31: [ 2085]: --> [2:OK]
Jan 06 00:48:21.37: [ 2085]: DIAL 0534345xxx
Jan 06 00:48:21.37: [ 2085]: <-- [16:ATDT0534345xxx@\r]
Jan 06 00:48:45.68: [ 2085]: --> [7:CONNECT]
Jan 06 00:48:47.34: [ 2085]: --> [2:OK]
Jan 06 00:48:47.34: [ 2085]: <-- [9:AT+FRH=3\r]
Jan 06 00:48:47.36: [ 2085]: --> [7:CONNECT]
Jan 06 00:48:48.04: [ 2085]: --> [2:OK]
Jan 06 00:48:48.04: [ 2085]: REMOTE CSI "053 4345xxx"
Jan 06 00:48:48.04: [ 2085]: <-- [9:AT+FRH=3\r]
Jan 06 00:48:48.06: [ 2085]: --> [7:CONNECT]
Jan 06 00:48:48.32: [ 2085]: --> [2:OK]
Jan 06 00:48:48.32: [ 2085]: REMOTE best rate 9600 bit/s
Jan 06 00:48:48.32: [ 2085]: REMOTE max page width 1728 pixels in 215 mm
Jan 06 00:48:48.32: [ 2085]: REMOTE max unlimited page length
Jan 06 00:48:48.32: [ 2085]: REMOTE best vres 7.7 line/mm
Jan 06 00:48:48.32: [ 2085]: REMOTE best format 2-D MR
Jan 06 00:48:48.32: [ 2085]: REMOTE best 20 ms, 10 ms/scanline
Jan 06 00:48:48.32: [ 2085]: USE 9600 bit/s
Jan 06 00:48:48.32: [ 2085]: USE 20 ms, 10 ms/scanline
Jan 06 00:48:48.32: [ 2085]: SEND file "docq/doc20.ps;40"
Jan 06 00:48:48.32: [ 2085]: USE page width 1728 pixels in 215 mm
Jan 06 00:48:48.32: [ 2085]: USE unlimited page length
Jan 06 00:48:48.32: [ 2085]: USE 3.85 line/mm
Jan 06 00:48:48.32: [ 2085]: USE 2-D MR
Jan 06 00:48:48.32: [ 2085]: SEND training at v.29 9600 bit/s
Jan 06 00:48:48.32: [ 2085]: <-- [9:AT+FTH=3\r]
Jan 06 00:48:49.33: [ 2085]: --> [7:CONNECT]
Jan 06 00:48:49.33: [ 2085]: <-- data [23]
Jan 06 00:48:49.33: [ 2085]: <-- data [2]
Jan 06 00:48:50.15: [ 2085]: --> [7:CONNECT]
Jan 06 00:48:50.15: [ 2085]: <-- data [6]
Jan 06 00:48:50.15: [ 2085]: <-- data [2]
Jan 06 00:48:50.53: [ 2085]: --> [2:OK]
Jan 06 00:48:50.53: [ 2085]: DELAY 75 ms
Jan 06 00:48:50.61: [ 2085]: <-- [10:AT+FTM=96\r]
Jan 06 00:48:50.88: [ 2085]: --> [7:CONNECT]
Jan 06 00:48:50.88: [ 2085]: <-- data [1024]
Jan 06 00:48:50.88: [ 2085]: <-- data [776]
Jan 06 00:48:50.88: [ 2085]: <-- data [2]
Jan 06 00:48:52.46: [ 2085]: --> [2:OK]
Jan 06 00:48:52.46: [ 2085]: <-- [9:AT+FRH=3\r]
Jan 06 00:48:52.60: [ 2085]: --> [7:CONNECT]
Jan 06 00:48:53.85: [ 2085]: --> [2:OK]
Jan 06 00:48:53.85: [ 2085]: TRAINING succeeded
Jan 06 00:48:53.85: [ 2085]: <-- [10:AT+FTM=96\r]
Jan 06 00:48:54.12: [ 2085]: --> [7:CONNECT]
Jan 06 00:48:54.12: [ 2085]: SEND begin page
Jan 06 00:48:54.12: [ 2085]: <-- data [1026]
Jan 06 00:48:54.12: [ 2085]: <-- data [1024]
<snip>
Jan 06 00:49:09.90: [ 2085]: <-- data [878]
Jan 06 00:49:10.51: [ 2085]: SENT 27497 bytes of data
Jan 06 00:49:10.51: [ 2085]: <-- data [1024]
<snip>
Jan 06 00:49:14.78: [ 2085]: <-- data [112]
Jan 06 00:49:15.09: [ 2085]: SENT 5232 bytes of data
Jan 06 00:49:15.09: [ 2085]: SEND 2D RTC
Jan 06 00:49:15.09: [ 2085]: <-- data [30]
Jan 06 00:49:15.09: [ 2085]: <-- data [2]
Jan 06 00:49:15.09: [ 2085]: SEND end page
Jan 06 00:49:21.49: [ 2085]: --> [148:^S^Q^S^Q^S^Q^S^Q^S^Q (repeats some 60
more times)
Jan 06 00:49:21.49: [ 2085]: --> [2:OK]
Jan 06 00:49:21.49: [ 2085]: DELAY 75 ms
Jan 06 00:49:21.57: [ 2085]: SEND send MPS (more pages, same document)
Jan 06 00:49:21.57: [ 2085]: <-- [9:AT+FTH=3\r]
Jan 06 00:49:22.53: [ 2085]: --> [7:CONNECT]
Jan 06 00:49:22.53: [ 2085]: <-- data [3]
Jan 06 00:49:22.53: [ 2085]: <-- data [2]
Jan 06 00:49:22.82: [ 2085]: --> [2:OK]
Jan 06 00:49:22.82: [ 2085]: <-- [9:AT+FRH=3\r]
Jan 06 00:49:25.92: [ 2085]: --> [0:]
Jan 06 00:49:25.92: [ 2085]: MODEM <Empty line>
Jan 06 00:49:25.92: [ 2085]: <-- data [1]
Jan 06 00:49:25.93: [ 2085]: --> [2:OK]
Jan 06 00:49:25.93: [ 2085]: SEND send MPS (more pages, same document)
<snip> this repeats 2 more times
Jan 06 00:49:36.01: [ 2085]: --> [2:OK]
Jan 06 00:49:36.01: [ 2085]: <-- [5:ATH0\r]
Jan 06 00:49:36.12: [ 2085]: --> [2:OK]
Jan 06 00:49:36.12: [ 2085]: SESSION END
So far, as soon as the other fax accepts the second page, it will accept the
third,
fourth and so on.
I can imagine that one remote fax is broken, but this happens with many
remote faxes...
Any clue is welcome, digging the FAQ's did not yield clues _sniff_ :-(
Thanks for any advice,
Willem
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
