Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Help: Cannot Build/Run Hylafax on OpenBSD



   I'm having real trouble getting HylaFAX (either 4.0pl2, which is 
the current version in the OpenBSD ports tree) or 4.1beta2 (built 
from sources) to work in OpenBSD 2.8.

   Problems with each version as follows:

4.0pl2 (OpenBSD Ports Collection)
=================================
-Builds ok if I edit configure and force a check for TIFF v3.5 instead of 3.4.
-Runs faxsetup with no trouble
-faxaddmodem lights up the modem's CS, TR, SD and RD lights (USR 
Courier v.Everything, USR Sportster v32, USR Sporter v34 -- tried all 
three) and freezes the modem if I select cua00 as the port
-faxaddmodem can run if I set the port to tty00, but doesn't work at 
all in operation -- I get modem wedged errors.

   These modems work fine using FreeBSD or Linux and (nearly) the same 
configuration.  They also work fine when used for PPP or 
direct-dialing with Minicom or cu (assuming I use cua00 -- tty00 
doesn't work)

4.1beta2
========
-Can't build with OpenBSD's native make
-Can build with gmake, but faxq isn't installed.

   I'm sort of at the end of my rope here.  Anyone /EVER/ get HylaFAX 
working on OpenBSD?
-- 
--dennis <mailto://dennis.favro@utoronto.ca>


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services