|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Busy signal detected 2 days along
Fabrice Cartron wrote:
> I have a problem when i send a fax with a usr class 2
> It works Ok for the most fax machine.
> But for only one (i don't known this type) the log
> tell me that there is busy signal detected.
> But when i phone with my gsm to this fax number
> i can listening a fax connection.
I have the same problem with at least 2 numbers when i send a fax with a ZYXEL U1496E/V 6.18 P
or ZYXEL U336RE/V 1.18. When i send a fax to these numbers with a fax machine it's OK.
Any ideas?
Dec 06 12:29:18.70: [19012]: SEND FAX: JOB 202 DEST XXXXXXXXX COMMID 00001533
Dec 06 12:29:18.70: [19012]: DELAY 2600 ms
Dec 06 12:29:21.29: [19012]: <-- [4:ATZ\r]
Dec 06 12:29:21.51: [19012]: --> [2:OK]
Dec 06 12:29:21.51: [19012]: <-- [44:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0\r]
Dec 06 12:29:21.74: [19012]: --> [43:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0]
Dec 06 12:29:21.74: [19012]: --> [2:OK]
Dec 06 12:29:21.74: [19012]: <-- [21:ATS8=2S7=60&H3&D2&C1\r]
Dec 06 12:29:21.77: [19012]: --> [2:OK]
Dec 06 12:29:21.77: [19012]: <-- [14:AT+FCLASS=2.0\r]
Dec 06 12:29:21.90: [19012]: --> [2:OK]
Dec 06 12:29:21.90: [19012]: <-- [9:AT+FLO=2\r]
Dec 06 12:29:21.93: [19012]: --> [2:OK]
Dec 06 12:29:21.93: [19012]: <-- [9:AT+FPP=0\r]
Dec 06 12:29:21.96: [19012]: --> [2:OK]
Dec 06 12:29:21.96: [19012]: <-- [9:AT+FBO=0\r]
Dec 06 12:29:21.99: [19012]: --> [2:OK]
Dec 06 12:29:21.99: [19012]: <-- [10:AT+FCT=30\r]
Dec 06 12:29:22.02: [19012]: --> [2:OK]
Dec 06 12:29:22.02: [19012]: <-- [15:AT+FNR=1,1,1,1\r]
Dec 06 12:29:22.05: [19012]: --> [2:OK]
Dec 06 12:29:22.05: [19012]: <-- [9:AT+FIE=0\r]
Dec 06 12:29:22.08: [19012]: --> [2:OK]
Dec 06 12:29:22.08: [19012]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Dec 06 12:29:22.11: [19012]: --> [2:OK]
Dec 06 12:29:22.11: [19012]: <-- [5:ATM0\r]
Dec 06 12:29:22.14: [19012]: --> [2:OK]
Dec 06 12:29:22.14: [19012]: <-- [14:AT+FCLASS=2.0\r]
Dec 06 12:29:22.38: [19012]: --> [2:OK]
Dec 06 12:29:22.38: [19012]: <-- [9:AT+FLO=2\r]
Dec 06 12:29:22.50: [19012]: --> [2:OK]
Dec 06 12:29:22.50: [19012]: <-- [9:AT+FPP=0\r]
Dec 06 12:29:22.62: [19012]: --> [2:OK]
Dec 06 12:29:22.62: [19012]: <-- [9:AT+FBO=0\r]
Dec 06 12:29:22.74: [19012]: --> [2:OK]
Dec 06 12:29:22.74: [19012]: <-- [10:AT+FCT=30\r]
Dec 06 12:29:22.86: [19012]: --> [2:OK]
Dec 06 12:29:22.86: [19012]: <-- [15:AT+FNR=1,1,1,1\r]
Dec 06 12:29:22.98: [19012]: --> [2:OK]
Dec 06 12:29:22.98: [19012]: <-- [9:AT+FIE=0\r]
Dec 06 12:29:23.10: [19012]: --> [2:OK]
Dec 06 12:29:23.10: [19012]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Dec 06 12:29:23.23: [19012]: --> [2:OK]
Dec 06 12:29:23.23: [19012]: <-- [17:AT+FLI="FAX FAX"\r]
Dec 06 12:29:23.35: [19012]: --> [2:OK]
Dec 06 12:29:23.36: [19012]: DIAL XXXXXXXXX
Dec 06 12:29:23.36: [19012]: <-- [18:ATDTXXXXXXXXX\r]
Dec 06 12:29:45.76: [19012]: --> [4:BUSY]
Dec 06 12:29:45.76: [19012]: SEND FAILED: Busy signal detected
Dec 06 12:29:45.76: [19012]: <-- [5:ATH0\r]
Dec 06 12:29:46.08: [19012]: --> [2:OK]
Dec 06 12:29:46.08: [19012]: SESSION END
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
