|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] No response to MPS repeated 3 times (code 52)
I'm using Hylafax 4.0p12 on a HP unix machine running HP-UX 11.0.
I'm trying to send out a fax using a multimodem MT5600ZDX. My cover page
reach the remote fax exept the last line which is squeezed, but the page
I'm trying to send out doesn't reach the remote fax. When I type faxstat
-s, I get the the job ID with the following error message: "No response
to MPS repeated 3 times"
Here is the log file I get each time I send a fax:
Dec 06 12:52:32.52: [ 3592]: SESSION BEGIN 00000008 27202242
Dec 06 12:52:32.53: [ 3592]: SEND FAX: JOB 28 DEST 0,027202242 COMMID
00000008
Dec 06 12:52:32.53: [ 3592]: DELAY 2600 ms
Dec 06 12:52:35.14: [ 3592]: <-- [15:ATE0V1Q0S0=0H0\r]
Dec 06 12:52:36.66: [ 3592]: --> [2:OK]
Dec 06 12:52:36.66: [ 3592]: <-- [18:ATS8=2S7=60&D2&C1\r]
Dec 06 12:52:36.68: [ 3592]: --> [2:OK]
Dec 06 12:52:36.68: [ 3592]: <-- [12:AT+FCLASS=2\r]
Dec 06 12:52:36.69: [ 3592]: --> [2:OK]
Dec 06 12:52:36.69: [ 3592]: <-- [10:AT+FTBC=0\r]
Dec 06 12:52:36.71: [ 3592]: --> [2:OK]
Dec 06 12:52:36.71: [ 3592]: <-- [10:AT+FBOR=0\r]
Dec 06 12:52:36.72: [ 3592]: --> [2:OK]
Dec 06 12:52:36.72: [ 3592]: <-- [13:AT+FPHCTO=30\r]
Dec 06 12:52:36.73: [ 3592]: --> [2:OK]
Dec 06 12:52:36.73: [ 3592]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Dec 06 12:52:36.75: [ 3592]: --> [2:OK]
Dec 06 12:52:36.75: [ 3592]: <-- [7:ATL0M1\r]
Dec 06 12:52:36.76: [ 3592]: --> [2:OK]
Dec 06 12:52:36.79: [ 3592]: <-- [12:AT+FCLASS=2\r]
Dec 06 12:52:36.91: [ 3592]: --> [2:OK]
Dec 06 12:52:36.91: [ 3592]: <-- [10:AT+FTBC=0\r]
Dec 06 12:52:37.02: [ 3592]: --> [2:OK]
Dec 06 12:52:37.02: [ 3592]: <-- [10:AT+FBOR=0\r]
Dec 06 12:52:37.13: [ 3592]: --> [2:OK]
Dec 06 12:52:37.13: [ 3592]: <-- [13:AT+FPHCTO=30\r]
Dec 06 12:52:37.24: [ 3592]: --> [2:OK]
Dec 06 12:52:37.24: [ 3592]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Dec 06 12:52:37.36: [ 3592]: --> [2:OK]
Dec 06 12:52:37.36: [ 3592]: <-- [22:AT+FLID="+3227165159"\r]
Dec 06 12:52:37.48: [ 3592]: --> [2:OK]
Dec 06 12:52:37.48: [ 3592]: DIAL 0,027202242
Dec 06 12:52:37.48: [ 3592]: <-- [16:ATDT0,027202242\r]
Dec 06 12:52:54.49: [ 3592]: --> [5:+FCON]
Dec 06 12:52:57.29: [ 3592]: --> [29:+FCSI: " 027202242"]
Dec 06 12:52:57.29: [ 3592]: REMOTE CSI "027202242"
Dec 06 12:52:57.66: [ 3592]: --> [22:+FDIS: 1,3,0,2,1,0,0,4]
Dec 06 12:52:57.76: [ 3592]: --> [2:OK]
Dec 06 12:52:57.76: [ 3592]: REMOTE best rate 9600 bit/s
Dec 06 12:52:57.76: [ 3592]: REMOTE max page width 1728 pixels in 215 mm
Dec 06 12:52:57.76: [ 3592]: REMOTE max unlimited page length
Dec 06 12:52:57.76: [ 3592]: REMOTE best vres 7.7 line/mm
Dec 06 12:52:57.76: [ 3592]: REMOTE best format 2-D MR
Dec 06 12:52:57.76: [ 3592]: REMOTE best 20 ms, 10 ms/scanline
Dec 06 12:52:57.76: [ 3592]: USE 9600 bit/s
Dec 06 12:52:57.76: [ 3592]: USE 20 ms, 10 ms/scanline
Dec 06 12:52:57.76: [ 3592]: SEND file "docq/doc28.cover;31"
Dec 06 12:52:57.76: [ 3592]: USE page width 1728 pixels in 215 mm
Dec 06 12:52:57.76: [ 3592]: USE unlimited page length
Dec 06 12:52:57.76: [ 3592]: USE 7.7 line/mm
Dec 06 12:52:57.76: [ 3592]: USE 1-D MR
Dec 06 12:52:57.76: [ 3592]: <-- [24:AT+FDIS=1,3,0,2,0,0,0,4\r]
Dec 06 12:52:57.88: [ 3592]: --> [2:OK]
Dec 06 12:52:57.88: [ 3592]: <-- [7:AT+FDT\r]
Dec 06 12:53:04.76: [ 3592]: --> [22:+FDCS: 1,3,0,2,0,0,0,3]
Dec 06 12:53:04.76: [ 3592]: --> [7:CONNECT]
Dec 06 12:53:04.76: [ 3592]: SEND wait for XON
Dec 06 12:53:04.76: [ 3592]: --> [1:]
Dec 06 12:53:04.76: [ 3592]: SEND begin page
Dec 06 12:53:04.76: [ 3592]: <-- data [1027]
Dec 06 12:53:05.31: [ 3592]: <-- data [1031]
Dec 06 12:53:05.88: [ 3592]: <-- data [1034]
Dec 06 12:53:06.56: [ 3592]: <-- data [1032]
Dec 06 12:53:07.24: [ 3592]: <-- data [1034]
Dec 06 12:53:07.92: [ 3592]: <-- data [1025]
Dec 06 12:53:08.49: [ 3592]: <-- data [1041]
Dec 06 12:53:09.17: [ 3592]: <-- data [1054]
Dec 06 12:53:09.85: [ 3592]: <-- data [1024]
Dec 06 12:53:10.42: [ 3592]: <-- data [1031]
Dec 06 12:53:11.10: [ 3592]: <-- data [1041]
Dec 06 12:53:11.78: [ 3592]: <-- data [1055]
Dec 06 12:53:12.35: [ 3592]: <-- data [1057]
Dec 06 12:53:13.03: [ 3592]: <-- data [1048]
Dec 06 12:53:13.71: [ 3592]: <-- data [1065]
Dec 06 12:53:14.39: [ 3592]: <-- data [1048]
Dec 06 12:53:15.08: [ 3592]: <-- data [1049]
Dec 06 12:53:15.64: [ 3592]: <-- data [1043]
Dec 06 12:53:16.33: [ 3592]: <-- data [1049]
Dec 06 12:53:17.01: [ 3592]: <-- data [1035]
Dec 06 12:53:17.69: [ 3592]: <-- data [1041]
Dec 06 12:53:18.26: [ 3592]: <-- data [1047]
Dec 06 12:53:18.94: [ 3592]: <-- data [1030]
Dec 06 12:53:19.62: [ 3592]: <-- data [1026]
Dec 06 12:53:20.19: [ 3592]: <-- data [1024]
Dec 06 12:53:20.87: [ 3592]: <-- data [485]
Dec 06 12:53:21.21: [ 3592]: SENT 26085 bytes of data
Dec 06 12:53:21.21: [ 3592]: <-- data [2]
Dec 06 12:53:21.21: [ 3592]: SEND end page
Dec 06 12:53:37.86: [ 3592]: --> [2:]
Dec 06 12:53:37.86: [ 3592]: --> [2:OK]
Dec 06 12:53:37.86: [ 3592]: SEND send MPS (more pages, same document)
Dec 06 12:53:37.86: [ 3592]: <-- [9:AT+FET=0\r]
Dec 06 12:53:51.57: [ 3592]: --> [9:+FHNG: 52]
Dec 06 12:53:51.57: [ 3592]: REMOTE HANGUP: No response to MPS repeated
3 times (code 52)
Dec 06 12:53:51.57: [ 3592]: <-- [5:ATH0\r]
Dec 06 12:53:53.01: [ 3592]: --> [2:OK]
Dec 06 12:53:53.03: [ 3592]: SESSION END
Could someone help me please ?
--
Vincent ROGISTER
N.V. Nexis S.A.
Leuvensesteenweg 542 B6
1930 Zaventem
Belgium
Tel: +(32)(2)7205151
Fax: +(32)(2)7202242
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
