Hi, my name's Nicola Zanella.
I use Hylafax hylafax-4.1beta2-6rh6 on RedHat6.2 with a class 1 modem (Digicom Raffaello fax/modem 14400).
This is my problem:
when I try to send a multipage fax to some kind of fax, the system get my
a error about MPS (multi page - same document) message.
I attach my tx log above.
Could you help me?
Thanks. Nov 24 09:26:07.94: [ 1156]: SESSION BEGIN 00000550 0542621350
Nov 24 09:26:07.94: [ 1156]: SEND FAX: JOB 245 DEST 0,0542621350 COMMID 00000550
Nov 24 09:26:07.94: [ 1156]: DELAY 2600 ms
Nov 24 09:26:10.53: [ 1156]: <-- [4:ATZ\r]
Nov 24 09:26:11.58: [ 1156]: --> [2:OK]
Nov 24 09:26:11.58: [ 1156]: <-- [15:ATE0V1Q0S0=0H0\r]
Nov 24 09:26:11.73: [ 1156]: --> [14:ATE0V1Q0S0=0H0]
Nov 24 09:26:11.73: [ 1156]: --> [2:OK]
Nov 24 09:26:11.73: [ 1156]: <-- [12:ATS8=2S7=60\r]
Nov 24 09:26:11.88: [ 1156]: --> [2:OK]
Nov 24 09:26:11.88: [ 1156]: <-- [12:AT+FCLASS=1\r]
Nov 24 09:26:12.03: [ 1156]: --> [2:OK]
Nov 24 09:26:12.03: [ 1156]: <-- [5:ATM0\r]
Nov 24 09:26:12.04: [ 1156]: --> [2:OK]
Nov 24 09:26:12.04: [ 1156]: <-- [12:AT+FCLASS=1\r]
Nov 24 09:26:12.16: [ 1156]: --> [2:OK]
Nov 24 09:26:12.17: [ 1156]: DIAL 0,0542621350
Nov 24 09:26:12.17: [ 1156]: <-- [17:ATDT0,0542621350\r]
Nov 24 09:26:33.25: [ 1156]: --> [7:CONNECT]
Nov 24 09:26:34.68: [ 1156]: --> [2:OK]
Nov 24 09:26:34.68: [ 1156]: REMOTE NSF "59 01 02 41 4D 49 20 41 52 45 41 20 43 4F 4D 4D 45 52 2E 20 20 20 20 CC 00 08 4C"
Nov 24 09:26:34.68: [ 1156]: NSF remote fax equipment: unknown
Nov 24 09:26:34.68: [ 1156]: NSF possible remote station ID: "AMI AREA COMMER. "
Nov 24 09:26:34.68: [ 1156]: <-- [9:AT+FRH=3\r]
Nov 24 09:26:34.70: [ 1156]: --> [7:CONNECT]
Nov 24 09:26:35.37: [ 1156]: --> [2:OK]
Nov 24 09:26:35.37: [ 1156]: REMOTE CSI "+39 0542 621350"
Nov 24 09:26:35.37: [ 1156]: <-- [9:AT+FRH=3\r]
Nov 24 09:26:35.39: [ 1156]: --> [7:CONNECT]
Nov 24 09:26:35.67: [ 1156]: --> [2:OK]
Nov 24 09:26:35.67: [ 1156]: REMOTE best rate 9600 bit/s
Nov 24 09:26:35.67: [ 1156]: REMOTE max page width 1728 pixels in 215 mm
Nov 24 09:26:35.67: [ 1156]: REMOTE max unlimited page length
Nov 24 09:26:35.67: [ 1156]: REMOTE best vres 7.7 line/mm
Nov 24 09:26:35.67: [ 1156]: REMOTE best format 2-D MR
Nov 24 09:26:35.67: [ 1156]: REMOTE supports T.30 Annex A, ECM
Nov 24 09:26:35.67: [ 1156]: REMOTE best 10 ms/scanline
Nov 24 09:26:35.67: [ 1156]: USE 9600 bit/s
Nov 24 09:26:35.67: [ 1156]: USE 10 ms/scanline
Nov 24 09:26:35.67: [ 1156]: SEND file "docq/doc242.ps;41"
Nov 24 09:26:35.68: [ 1156]: USE page width 1728 pixels in 215 mm
Nov 24 09:26:35.68: [ 1156]: USE unlimited page length
Nov 24 09:26:35.68: [ 1156]: USE 7.7 line/mm
Nov 24 09:26:35.68: [ 1156]: USE 2-D MR
Nov 24 09:26:35.68: [ 1156]: SEND training at v.29 9600 bit/s
Nov 24 09:26:35.68: [ 1156]: <-- [9:AT+FTH=3\r]
Nov 24 09:26:35.73: [ 1156]: --> [7:CONNECT]
Nov 24 09:26:35.73: [ 1156]: <-- data [23]
Nov 24 09:26:35.73: [ 1156]: <-- data [2]
Nov 24 09:26:37.51: [ 1156]: --> [7:CONNECT]
Nov 24 09:26:37.51: [ 1156]: <-- data [6]
Nov 24 09:26:37.51: [ 1156]: <-- data [2]
Nov 24 09:26:37.87: [ 1156]: --> [2:OK]
Nov 24 09:26:37.87: [ 1156]: DELAY 75 ms
Nov 24 09:26:37.95: [ 1156]: <-- [10:AT+FTM=96\r]
Nov 24 09:26:38.00: [ 1156]: --> [7:CONNECT]
Nov 24 09:26:38.00: [ 1156]: <-- data [1024]
Nov 24 09:26:38.00: [ 1156]: <-- data [776]
Nov 24 09:26:38.01: [ 1156]: <-- data [2]
Nov 24 09:26:39.96: [ 1156]: --> [2:OK]
Nov 24 09:26:39.96: [ 1156]: <-- [9:AT+FRH=3\r]
Nov 24 09:26:40.34: [ 1156]: --> [7:CONNECT]
Nov 24 09:26:41.29: [ 1156]: --> [2:OK]
Nov 24 09:26:41.29: [ 1156]: TRAINING succeeded
Nov 24 09:26:41.29: [ 1156]: <-- [10:AT+FTM=96\r]
Nov 24 09:26:41.36: [ 1156]: --> [7:CONNECT]
Nov 24 09:26:41.36: [ 1156]: SEND begin page
Nov 24 09:26:41.38: [ 1156]: <-- data [1028]
Nov 24 09:26:41.38: [ 1156]: <-- data [1025]
Nov 24 09:26:41.38: [ 1156]: <-- data [1026]
Nov 24 09:26:41.38: [ 1156]: <-- data [1050]
Nov 24 09:26:43.38: [ 1156]: <-- data [1041]
Nov 24 09:26:43.38: [ 1156]: <-- data [1040]
Nov 24 09:26:43.38: [ 1156]: <-- data [1024]
Nov 24 09:26:43.38: [ 1156]: <-- data [1026]
Nov 24 09:26:45.37: [ 1156]: <-- data [1029]
Nov 24 09:26:45.37: [ 1156]: <-- data [1033]
Nov 24 09:26:45.37: [ 1156]: <-- data [1034]
Nov 24 09:26:45.37: [ 1156]: <-- data [1029]
Nov 24 09:26:47.37: [ 1156]: <-- data [1036]
Nov 24 09:26:47.37: [ 1156]: <-- data [1029]
Nov 24 09:26:47.37: [ 1156]: <-- data [1033]
Nov 24 09:26:47.37: [ 1156]: <-- data [1031]
Nov 24 09:26:49.37: [ 1156]: <-- data [1027]
Nov 24 09:26:49.37: [ 1156]: <-- data [1038]
Nov 24 09:26:49.37: [ 1156]: <-- data [1030]
Nov 24 09:26:51.36: [ 1156]: <-- data [1031]
Nov 24 09:26:51.36: [ 1156]: <-- data [1029]
Nov 24 09:26:51.36: [ 1156]: <-- data [1028]
Nov 24 09:26:51.36: [ 1156]: <-- data [1035]
Nov 24 09:26:53.36: [ 1156]: <-- data [1034]
Nov 24 09:26:53.36: [ 1156]: <-- data [1033]
Nov 24 09:26:53.36: [ 1156]: <-- data [1031]
Nov 24 09:26:53.36: [ 1156]: <-- data [823]
Nov 24 09:26:55.36: [ 1156]: SENT 27444 bytes of data
Nov 24 09:26:55.36: [ 1156]: <-- data [1036]
Nov 24 09:26:55.36: [ 1156]: <-- data [1032]
Nov 24 09:26:55.36: [ 1156]: <-- data [1031]
Nov 24 09:26:55.36: [ 1156]: <-- data [1032]
Nov 24 09:26:57.35: [ 1156]: <-- data [1031]
Nov 24 09:26:57.35: [ 1156]: <-- data [1032]
Nov 24 09:26:57.35: [ 1156]: <-- data [1029]
Nov 24 09:26:59.35: [ 1156]: <-- data [1030]
Nov 24 09:26:59.35: [ 1156]: <-- data [1033]
Nov 24 09:26:59.35: [ 1156]: <-- data [1030]
Nov 24 09:26:59.35: [ 1156]: <-- data [1026]
Nov 24 09:27:01.35: [ 1156]: <-- data [1036]
Nov 24 09:27:01.35: [ 1156]: <-- data [1030]
Nov 24 09:27:01.35: [ 1156]: <-- data [1024]
Nov 24 09:27:01.35: [ 1156]: <-- data [1024]
Nov 24 09:27:03.34: [ 1156]: <-- data [1024]
Nov 24 09:27:03.34: [ 1156]: <-- data [446]
Nov 24 09:27:03.34: [ 1156]: SENT 16830 bytes of data
Nov 24 09:27:03.34: [ 1156]: SEND 2D RTC
Nov 24 09:27:03.34: [ 1156]: <-- data [30]
Nov 24 09:27:03.34: [ 1156]: <-- data [2]
Nov 24 09:27:03.34: [ 1156]: SEND end page
Nov 24 09:27:14.84: [ 1156]: --> [2:]
Nov 24 09:27:14.84: [ 1156]: --> [2:OK]
Nov 24 09:27:14.84: [ 1156]: DELAY 75 ms
Nov 24 09:27:14.92: [ 1156]: SEND send MPS (more pages, same document)
Nov 24 09:27:14.92: [ 1156]: <-- [9:AT+FTH=3\r]
Nov 24 09:27:14.97: [ 1156]: --> [7:CONNECT]
Nov 24 09:27:14.97: [ 1156]: <-- data [3]
Nov 24 09:27:14.97: [ 1156]: <-- data [2]
Nov 24 09:27:16.28: [ 1156]: --> [2:OK]
Nov 24 09:27:16.28: [ 1156]: <-- [9:AT+FRH=3\r]
Nov 24 09:27:19.38: [ 1156]: --> [0:]
Nov 24 09:27:19.38: [ 1156]: MODEM <Empty line>
Nov 24 09:27:19.38: [ 1156]: <-- data [1]
Nov 24 09:27:19.44: [ 1156]: --> [2:OK]
Nov 24 09:27:19.44: [ 1156]: SEND send MPS (more pages, same document)
Nov 24 09:27:19.44: [ 1156]: <-- [9:AT+FTH=3\r]
Nov 24 09:27:19.50: [ 1156]: --> [7:CONNECT]
Nov 24 09:27:19.50: [ 1156]: <-- data [3]
Nov 24 09:27:19.50: [ 1156]: <-- data [2]
Nov 24 09:27:20.83: [ 1156]: --> [2:OK]
Nov 24 09:27:20.83: [ 1156]: <-- [9:AT+FRH=3\r]
Nov 24 09:27:23.93: [ 1156]: --> [0:]
Nov 24 09:27:23.93: [ 1156]: MODEM <Empty line>
Nov 24 09:27:23.93: [ 1156]: <-- data [1]
Nov 24 09:27:23.99: [ 1156]: --> [2:OK]
Nov 24 09:27:23.99: [ 1156]: SEND send MPS (more pages, same document)
Nov 24 09:27:23.99: [ 1156]: <-- [9:AT+FTH=3\r]
Nov 24 09:27:24.05: [ 1156]: --> [7:CONNECT]
Nov 24 09:27:24.05: [ 1156]: <-- data [3]
Nov 24 09:27:24.05: [ 1156]: <-- data [2]
Nov 24 09:27:25.36: [ 1156]: --> [2:OK]
Nov 24 09:27:25.36: [ 1156]: <-- [9:AT+FRH=3\r]
Nov 24 09:27:28.46: [ 1156]: --> [0:]
Nov 24 09:27:28.46: [ 1156]: MODEM <Empty line>
Nov 24 09:27:28.46: [ 1156]: <-- data [1]
Nov 24 09:27:28.52: [ 1156]: --> [2:OK]
Nov 24 09:27:28.52: [ 1156]: No response to MPS or EOP repeated 3 tries
Nov 24 09:27:28.52: [ 1156]: <-- [9:AT+FTH=3\r]
Nov 24 09:27:28.58: [ 1156]: --> [7:CONNECT]
Nov 24 09:27:28.58: [ 1156]: <-- data [3]
Nov 24 09:27:28.58: [ 1156]: <-- data [2]
Nov 24 09:27:29.91: [ 1156]: --> [2:OK]
Nov 24 09:27:29.91: [ 1156]: <-- [5:ATH0\r]
Nov 24 09:27:31.09: [ 1156]: --> [2:OK]
Nov 24 09:27:31.09: [ 1156]: SESSION END
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
