Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] ASCII/PS to G3 format conversion problem



At 05:11 PM 11/5/00 +0100, Dirk Versavel wrote:
>I setup HylaFAX (latest version, compiled sources myself) on a RedHat Linux
>6.2 machine (i386).
>When I try to send an ASCII file using sendfax, a blank page arrives and a
>warning is given: "WARNING: are you sure that this is a G3 fax file? Doesn't
>seem to be..."
>If I manually convert this ASCII file to a PS file using textfmt and send is
>using sendfax, I get the same message.
>If I then manually convert this PS file to a fax-file using ps2fax.gs, a I
>get following error: "WARNING: file may be 'tiffg3' - TIFF file format is
>*not* supported. Thus fax transmission will most probably fail".
>
>What is wrong here?

I think you're are using mgetty's sendfax - do a 'whereis sendfax' to see 
if you can find hylafax's version.

- Robert



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services