|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] (cvs) RTN with 2-D, ok (MCF) with 1-D
On 29 Oct 2000 23:11:45 +0300, you wrote:
>Could you try to connect both modems to the Hylafax server and send the
>same fax from modem #2 to modem #1? The log on receiving side is very
>interesting. Also save intermediate TIFF -- it would help to catch the bug
>if it really exists.
I tried
FROM modem #2 (topic) attached to a server with the latest cvs
TO modem #1 (rockwell) attached to a server with april cvs (beta2).
"Unfortunately" the fax trasmission went well, no errors.
However the log at the receiving side show some "anomalies" (bad pixel count),
so I'm sending it; note that the same anomalies show with 1D,
though. I don't remember seeing the same anomalies when
the sending fax was the rockwell chipset one; tomorrow I'll be able to
test this.
If necessary, tomorrow I can attach the receiving modem to
a current cvs version.
What do you mean by "intermediate" tiff? The tiff on the receiving side?
The tiff received by HylaFAX was ok, no barcode.
Thanks
Oct 29 21:24:13.80: [17391]: SESSION BEGIN 00003330 39111111111
Oct 29 21:24:13.80: [17391]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
Oct 29 21:24:13.80: [17391]: <-- [4:ATA\r]
Oct 29 21:24:19.90: [17391]: --> [7:CONNECT]
Oct 29 21:24:19.90: [17391]: ANSWER: FAX CONNECTION
Oct 29 21:24:19.90: [17391]: STATE CHANGE: ANSWERING -> RECEIVING
Oct 29 21:24:19.90: [17391]: MODEM input buffering enabled
Oct 29 21:24:19.90: [17391]: RECV FAX: begin
Oct 29 21:24:19.92: [17391]: MODEM input buffering disabled
Oct 29 21:24:19.92: [17391]: <-- HDLC<23:FF C0 02 0C EC 6C EC 4C 6C 04 9C 8C 0C 04 9C CC D4 04 04 04 04 04 04>
Oct 29 21:24:19.92: [17391]: <-- data [23]
Oct 29 21:24:19.92: [17391]: <-- data [2]
Oct 29 21:24:21.59: [17391]: --> [7:CONNECT]
Oct 29 21:24:21.59: [17391]: <-- HDLC<10:FF C8 01 00 77 5F 01 79 03 C0>
Oct 29 21:24:21.59: [17391]: <-- data [10]
Oct 29 21:24:21.59: [17391]: <-- data [2]
Oct 29 21:24:22.14: [17391]: --> [2:OK]
Oct 29 21:24:22.14: [17391]: <-- [9:AT+FRH=3\r]
Oct 29 21:24:22.54: [17391]: --> [7:CONNECT]
Oct 29 21:24:24.03: [17391]: --> HDLC<25:FF C0 C2 0C 0C 0C 0C 0C 0C 04 0C 0C 0C 04 9C CC D4 04 04 04 04 04 04 C7 7B>
Oct 29 21:24:24.03: [17391]: --> [2:OK]
Oct 29 21:24:24.03: [17391]: REMOTE TSI "+39 000 000000"
Oct 29 21:24:24.03: [17391]: <-- [9:AT+FRH=3\r]
Oct 29 21:24:24.05: [17391]: --> [7:CONNECT]
Oct 29 21:24:24.38: [17391]: --> HDLC<8:FF C8 C1 00 47 1E 36 71>
Oct 29 21:24:24.39: [17391]: --> [2:OK]
Oct 29 21:24:24.39: [17391]: REMOTE wants 14400 bit/s
Oct 29 21:24:24.39: [17391]: REMOTE wants page width 1728 pixels in 215 mm
Oct 29 21:24:24.39: [17391]: REMOTE wants unlimited page length
Oct 29 21:24:24.39: [17391]: REMOTE wants 7.7 line/mm
Oct 29 21:24:24.39: [17391]: REMOTE wants 2-D MR
Oct 29 21:24:24.39: [17391]: RECV training at v.17 14400 bit/s
Oct 29 21:24:24.39: [17391]: MODEM set XON/XOFF/DRAIN: input ignored, output generated
Oct 29 21:24:24.39: [17391]: <-- [11:AT+FRM=145\r]
Oct 29 21:24:26.18: [17391]: --> [7:CONNECT]
Oct 29 21:24:27.76: [17391]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Oct 29 21:24:27.76: [17391]: RECV: TCF 2808 bytes, 0% non-zero, 2774 zero-run
Oct 29 21:24:27.77: [17391]: --> [10:NO CARRIER]
Oct 29 21:24:27.77: [17391]: DELAY 75 ms
Oct 29 21:24:27.85: [17391]: <-- [9:AT+FTH=3\r]
Oct 29 21:24:27.90: [17391]: --> [7:CONNECT]
Oct 29 21:24:27.90: [17391]: <-- HDLC<3:FF C8 21>
Oct 29 21:24:27.90: [17391]: <-- data [3]
Oct 29 21:24:27.90: [17391]: <-- data [2]
Oct 29 21:24:29.22: [17391]: --> [2:OK]
Oct 29 21:24:29.22: [17391]: TRAINING succeeded
Oct 29 21:24:29.22: [17391]: MODEM input buffering enabled
Oct 29 21:24:29.22: [17391]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Oct 29 21:24:29.22: [17391]: <-- [11:AT+FRM=146\r]
Oct 29 21:24:29.79: [17391]: --> [7:CONNECT]
Oct 29 21:24:29.79: [17391]: RECV: begin page
Oct 29 21:24:43.29: [17391]: RECV/CQ: Bad 2D pixel count, row 1366, got 79, expected 1728
Oct 29 21:24:43.29: [17391]: RECV/CQ: Bad 1D pixel count, row 1367, got 0, expected 1728
Oct 29 21:24:43.29: [17391]: RECV/CQ: Bad 1D pixel count, row 1368, got 0, expected 1728
Oct 29 21:24:43.29: [17391]: RECV/CQ: Bad 1D pixel count, row 1369, got 0, expected 1728
Oct 29 21:24:43.29: [17391]: RECV/CQ: Bad 1D pixel count, row 1370, got 0, expected 1728
Oct 29 21:24:43.29: [17391]: RECV/CQ: Bad 1D pixel count, row 1371, got 0, expected 1728
Oct 29 21:24:43.69: [17391]: RECV/CQ: Adjusting for RTC found at row 1366
Oct 29 21:24:43.69: [17391]: RECV: 1366 total lines, 0 bad lines, 0 consecutive bad lines
Oct 29 21:24:43.69: [17391]: RECV: end page
Oct 29 21:24:43.69: [17391]: --> [10:NO CARRIER]
Oct 29 21:24:43.69: [17391]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Oct 29 21:24:43.69: [17391]: MODEM input buffering disabled
Oct 29 21:24:43.69: [17391]: <-- [9:AT+FRH=3\r]
Oct 29 21:24:44.05: [17391]: --> [7:CONNECT]
Oct 29 21:24:44.99: [17391]: --> HDLC<5:FF C8 F4 CC 66>
Oct 29 21:24:45.00: [17391]: --> [2:OK]
Oct 29 21:24:45.00: [17391]: RECV recv EOP (no more pages or documents)
Oct 29 21:24:45.00: [17391]: <-- [9:AT+FTH=3\r]
Oct 29 21:24:45.05: [17391]: --> [7:CONNECT]
Oct 29 21:24:45.05: [17391]: <-- HDLC<3:FF C8 31>
Oct 29 21:24:45.05: [17391]: <-- data [3]
Oct 29 21:24:45.05: [17391]: <-- data [2]
Oct 29 21:24:46.37: [17391]: --> [2:OK]
Oct 29 21:24:46.37: [17391]: RECV send MCF (message confirmation)
Oct 29 21:24:46.37: [17391]: RECV FAX (00003330): from +39 000 000000, page 1 in 0:17, INF, 7.7 line/mm, 2-D MR
Oct 29 21:24:46.37: [17391]: RECV FAX (00003330): recvq/fax00029.tif from +39 000 000000, route to <unspecified>, 1
pages in 0:27
Oct 29 21:24:46.38: [17391]: <-- [9:AT+FRH=3\r]
Oct 29 21:24:46.77: [17391]: --> [7:CONNECT]
Oct 29 21:24:47.73: [17391]: --> HDLC<5:FF C8 DF 59 6F>
Oct 29 21:24:47.74: [17391]: --> [2:OK]
Oct 29 21:24:47.74: [17391]: MODEM input buffering enabled
Oct 29 21:24:47.74: [17391]: RECV FAX: bin/faxrcvd "recvq/fax00029.tif" "ttyS2" "00003330" ""
Oct 29 21:24:48.17: [17391]: RECV FAX: end
Oct 29 21:24:48.17: [17391]: SESSION END
1D:
Oct 29 21:35:24.09: [17391]: RECV: begin page
Oct 29 21:35:24.09: [17391]: RECV/CQ: Bad 1D pixel count, row 0, got 1738, expected 1728
Oct 29 21:35:42.85: [17391]: RECV/CQ: Bad 1D pixel count, row 1367, got 0, expected 1728
Oct 29 21:35:42.85: [17391]: RECV/CQ: Bad 1D pixel count, row 1368, got 0, expected 1728
Oct 29 21:35:42.85: [17391]: RECV/CQ: Bad 1D pixel count, row 1369, got 0, expected 1728
Oct 29 21:35:42.85: [17391]: RECV/CQ: Bad 1D pixel count, row 1370, got 0, expected 1728
Oct 29 21:35:42.85: [17391]: RECV/CQ: Bad 1D pixel count, row 1371, got 0, expected 1728
Oct 29 21:35:43.25: [17391]: RECV/CQ: Adjusting for RTC found at row 1366
Oct 29 21:35:43.25: [17391]: RECV: 1366 total lines, 0 bad lines, 1 consecutive
bad lines
Oct 29 21:35:43.25: [17391]: RECV: end page
Oct 29 21:35:43.25: [17391]: --> [10:NO CARRIER]
--
giulioo@pobox.com
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
