|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Courier I-Modem ISDN/V.34 Problem
CÈdric Bole-Richard <c.bolerichard@fabi.fr> writes:
> My version of HylaFAX is 4.1beta2.
BTW, why not to use the latest .rpm?
> My modem is new, i have received it wednesday.
> I have tested :
> ModemResetCmds: ATZ\nAT
If I say "ATZ\nAT" do exactly that! Double quotes are *required* here.
> ModemResetCmds: ATZ
> ModemResetCmds: AT&F1
> ModemResetCmds: ""
>
> In minicom, all command are OK. If i type the same sequence that faxgetty in
> minicom, it's OK !
>
> Always the same problem ...
> I'm desperate :-(
> My log :
> Oct 24 17:54:22 Srv_Fabi02 FaxGetty[13358]: OPEN /dev/ttyS0
> Oct 24 17:54:22 Srv_Fabi02 FaxGetty[13358]: MODEM set DTR OFF
> Oct 24 17:54:22 Srv_Fabi02 FaxGetty[13358]: DELAY 2600 ms
> Oct 24 17:54:25 Srv_Fabi02 FaxGetty[13358]: MODEM set DTR ON
> Oct 24 17:54:25 Srv_Fabi02 FaxGetty[13358]: MODEM set baud rate: 19200 baud,
> input flow RTS/CTS, output flow RTS/CTS
> Oct 24 17:54:25 Srv_Fabi02 FaxGetty[13358]: MODEM flush i/o
> Oct 24 17:54:25 Srv_Fabi02 FaxGetty[13358]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Still do not see ATZ ...
> > try to add the following to your config.modem:
> >
> > ModemResetCmds: "ATZ\nAT"
Hope to hear from you soon,
Dmitry
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
