[hylafax-users] Problem with Courier I-Modem

[Cédric BOLE-RICHARD <c.bolerichard@fabi.fr>]

Mail return : Modem on /dev/cua0 appears wedged
Faxstat return : Waiting for modem to come ready

My modem's configuration is incorrect ?

What can i do to resolve this problem ?
Thank for answer.


Configuration :

Linux Slackware 7.0
Kernel 2.2.17
Hylafax 4.1beta2
Courier I-modem V.34 ISDN

This is my log :

Oct 23 07:21:03 Srv_Fabi02 FaxGetty[3323]: OPEN /dev/cua0
Oct 23 07:21:03 Srv_Fabi02 FaxGetty[3323]: MODEM set DTR OFF
Oct 23 07:21:03 Srv_Fabi02 FaxGetty[3323]: DELAY 2600 ms
Oct 23 07:21:05 Srv_Fabi02 FaxGetty[3323]: MODEM set DTR ON
Oct 23 07:21:05 Srv_Fabi02 FaxGetty[3323]: MODEM set baud rate: 19200 baud, input flow RTS/CTS, output flow RTS/CTS
Oct 23 07:21:05 Srv_Fabi02 FaxGetty[3323]: MODEM flush i/o
Oct 23 07:21:05 Srv_Fabi02 FaxGetty[3323]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Oct 23 07:21:10 Srv_Fabi02 FaxGetty[3323]: MODEM TIMEOUT: reading line from modem
Oct 23 07:21:10 Srv_Fabi02 FaxGetty[3323]: MODEM <Timeout>
Oct 23 07:21:10 Srv_Fabi02 FaxGetty[3323]: MODEM set DTR OFF
Oct 23 07:21:10 Srv_Fabi02 FaxGetty[3323]: DELAY 2600 ms
Oct 23 07:21:13 Srv_Fabi02 FaxGetty[3323]: MODEM set DTR ON
Oct 23 07:21:13 Srv_Fabi02 FaxGetty[3323]: MODEM set baud rate: 19200 baud, input flow RTS/CTS, output flow RTS/CTS
Oct 23 07:21:13 Srv_Fabi02 FaxGetty[3323]: MODEM flush i/o
Oct 23 07:21:13 Srv_Fabi02 FaxGetty[3323]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Oct 23 07:21:18 Srv_Fabi02 FaxGetty[3323]: MODEM TIMEOUT: reading line from modem
Oct 23 07:21:18 Srv_Fabi02 FaxGetty[3323]: MODEM <Timeout>
Oct 23 07:21:18 Srv_Fabi02 FaxGetty[3323]: MODEM set DTR OFF
Oct 23 07:21:18 Srv_Fabi02 FaxGetty[3323]: /dev/cua0: Can not initialize modem.

This is my config.cua0 :

CountryCode:  33
AreaCode:  04
FAXNumber:  0381671597
LongDistancePrefix: 0
InternationalPrefix: 00
DialStringRules: etc/dialrules
ServerTracing:  0x0f
SessionTracing:  11
RecvFileMode:  0600
LogFileMode:  0600
DeviceMode:  0600
RingsBeforeAnswer: 0
SpeakerVolume:  off
GettyArgs:  "-h %l dx_%s"
LocalIdentifier: "XXX"
TagLineFont:  etc/lutRS18.pcf
TagLineFormat:  "From %%l|%c|Page %%p of %%t"
PercentGoodLines: 85
MaxRecvPages:  25
#
ModemType:  Class2.0
ModemRate:  38400
ModemFlowControl: rtscts
ModemSetupDTRCmd: ATS13=1&D2
ModemSetupDCDCmd: AT&C1
ModemDialCmd:  ATDT%s
ModemResetCmds:  ""
ModemAnswerCmd:  ATA
ModemNoAutoAnswerCmd: ATS0=0
ModemNoFlowCmd:  AT&H0&I0&R1
ModemHardFlowCmd: AT&H1&I0&R2
ModemSoftFlowCmd: AT&H2&I2&R1
ModemSetupAACmd: AT+FAA=1
ModemSetVolumeCmd: "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
ModemEchoOffCmd: ATE0
ModemVerboseResultsCmd: ATV1
ModemResultCodesCmd: ATQ0X4
ModemOnHookCmd:  ATH0
ModemSoftResetCmd: ATZ
ModemWaitTimeCmd: ATS7=60
ModemCommaPauseTimeCmd: ATS8=2
ModemRecvFillOrder: LSB2MSB
ModemSendFillOrder: LSB2MSB
Class2Cmd:  AT+FCLASS=2.0
Class2BORCmd:  AT+FB0=0
Class2CQCmd:  ""
Class2AbortCmd:  AT+FKS
Class2CQQueryCmd: !(0),(0)
Class2DCCQueryCmd: AT+FCC=?
Class2TBCCmd:  AT+FPP=0
Class2CRCmd:  AT+FCR=1
Class2PHCTOCmd:  AT+FCT=30
Class2BUGCmd:  AT+FBU=0
Class2LIDCmd:  AT+FLI
Class2DCCCmd:  AT+FCC
Class2DISCmd:  AT+FIS
Class2DDISCmd:  ""
Class2CIGCmd:  AT+FPI
Class2NRCmd:     AT+FNR=1,1,1,0
Class2PIECmd:  AT+FIE=0
Class2PTSCmd:  AT+FPS
Class2SPLCmd:  AT+FSP
Class2NFLOCmd:  AT+FLO=0
Class2SFLOCmd:  AT+FLO=1
Class2HFLOCmd:  AT+FLO=2