[hylafax-users] Error after receiving fax ok

To: <hylafax-users@hylafax.org>
Subject: [hylafax-users] Error after receiving fax ok
From: <ignace.suy@dutchtone.nl>
Date: 11 Oct 2000 06:19

While receiving a fax, when finishing up the communication with the modem,
the following error occurrs:
Oct 10 19:43:19 dallas FaxGetty[773]: <-- [9:AT+FAP=?\r]
Oct 10 19:43:19 dallas FaxGetty[773]: --> [5:ERROR]

If this has anything to do with it or not....:
-the fax is received allright as the incoming TIFs are displaying fine
-but an error is reported to the faxmaster
-the sending faxmachine (a canon) is reporting a fatal communication error

My modemmanual does not say anything about this command.
Back in '97 there was a mailinglist entry saying to simply disregard the
error, but that does not give the sender a good feeling here.

Anybody any leads?

Ignace Suy

---- specs -----
Hylafax 4.1beta2 On SuSE 6.4, bausch modem
---- full log -----
Oct 11 07:51:08 dallas FaxGetty[18538]: MODEM input buffering enabled
Oct 11 07:51:08 dallas FaxGetty[18538]: --> [4:RING]
Oct 11 07:51:08 dallas FaxGetty[18538]: MODEM input buffering enabled
Oct 11 07:51:16 dallas FaxGetty[18538]: ANSWER: FAX CONNECTION
Oct 11 07:51:40 dallas FaxGetty[18538]: RECV FAX (00000051): from
0031708899955, page 1 in 0:22, INF, 7.7 line/mm, 2-D MR
Oct 11 07:52:05 dallas FaxGetty[18538]: RECV FAX (00000051): from
0031708899955, page 2 in 0:25, INF, 7.7 line/mm, 2-D MR
Oct 11 07:52:05 dallas FaxGetty[18538]: RECV FAX (00000051):
recvq/fax00008.tif from 0031708899955, route to <unspecified>, 2 pages in
0:49
Oct 11 07:52:07 dallas FaxGetty[18538]: RECV FAX: bin/faxrcvd
"recvq/fax00008.tif" "ttyS0" "00000051" ""
Oct 11 07:52:08 dallas FaxGetty[18538]: <-- [5:ATH0\r]
Oct 11 07:52:08 dallas FaxGetty[18538]: --> [2:OK]
Oct 11 07:52:08 dallas FaxGetty[18538]: MODEM set DTR OFF
Oct 11 07:52:08 dallas FaxGetty[18538]: MODEM set DTR OFF
Oct 11 07:52:08 dallas FaxGetty[18538]: DELAY 2600 ms
Oct 11 07:52:11 dallas FaxGetty[18538]: MODEM set DTR ON
Oct 11 07:52:11 dallas FaxGetty[18538]: MODEM set baud rate: 38400 baud,
input flow RTS/CTS, output flow RTS/CTS
Oct 11 07:52:11 dallas FaxGetty[18538]: MODEM flush i/o
Oct 11 07:52:11 dallas FaxGetty[18538]: <-- [15:ATE0V1Q0S0=0H0\r]
Oct 11 07:52:11 dallas FaxGetty[18538]: --> [2:OK]
Oct 11 07:52:11 dallas FaxGetty[18538]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]
Oct 11 07:52:11 dallas FaxGetty[18538]: --> [2:OK]
Oct 11 07:52:11 dallas FaxGetty[18538]: <-- [12:AT+FCLASS=?\r]
Oct 11 07:52:11 dallas FaxGetty[18538]: --> [5:0,1,2]
Oct 11 07:52:11 dallas FaxGetty[18538]: --> [2:OK]
Oct 11 07:52:11 dallas FaxGetty[18538]: <-- [12:AT+FCLASS=2\r]
Oct 11 07:52:11 dallas FaxGetty[18538]: --> [2:OK]
Oct 11 07:52:11 dallas FaxGetty[18538]: <-- [9:AT+FMFR?\r]
Oct 11 07:52:11 dallas FaxGetty[18538]: --> [20:ROCKWELL            ]
Oct 11 07:52:11 dallas FaxGetty[18538]: --> [2:OK]
Oct 11 07:52:11 dallas FaxGetty[18538]: <-- [9:AT+FMDL?\r]
Oct 11 07:52:11 dallas FaxGetty[18538]: --> [20:AC/V34              ]
Oct 11 07:52:11 dallas FaxGetty[18538]: --> [2:OK]
Oct 11 07:52:11 dallas FaxGetty[18538]: <-- [9:AT+FREV?\r]
Oct 11 07:52:11 dallas FaxGetty[18538]: --> [13:V1.617-V34_DS]
Oct 11 07:52:11 dallas FaxGetty[18538]: --> [2:OK]
Oct 11 07:52:11 dallas FaxGetty[18538]: <-- [10:AT+FDCC=?\r]
Oct 11 07:52:11 dallas FaxGetty[18538]: -->
[39:(0,1),(0-5),(0-2),(0-2),(0,1),0,0,(0-7)]
Oct 11 07:52:11 dallas FaxGetty[18538]: --> [2:OK]
Oct 11 07:52:11 dallas FaxGetty[18538]: <-- [9:AT+FCQ=?\r]
Oct 11 07:52:12 dallas FaxGetty[18538]: --> [1:0]
Oct 11 07:52:12 dallas FaxGetty[18538]: --> [2:OK]
Oct 11 07:52:12 dallas FaxGetty[18538]: <-- [9:AT+FAP=?\r]
Oct 11 07:52:12 dallas FaxGetty[18538]: --> [5:ERROR]
Oct 11 07:52:12 dallas FaxGetty[18538]: <-- [10:AT+FSPL=?\r]
Oct 11 07:52:12 dallas FaxGetty[18538]: --> [3:0,1]
Oct 11 07:52:12 dallas FaxGetty[18538]: --> [2:OK]
Oct 11 07:52:12 dallas FaxGetty[18538]: <-- [12:AT+FCLASS=2\r]
Oct 11 07:52:12 dallas FaxGetty[18538]: --> [2:OK]
Oct 11 07:52:12 dallas FaxGetty[18538]: <-- [10:AT+FTBC=0\r]
Oct 11 07:52:12 dallas FaxGetty[18538]: --> [2:OK]
Oct 11 07:52:12 dallas FaxGetty[18538]: <-- [10:AT+FBOR=0\r]
Oct 11 07:52:12 dallas FaxGetty[18538]: --> [2:OK]
Oct 11 07:52:12 dallas FaxGetty[18538]: <-- [13:AT+FPHCTO=30\r]
Oct 11 07:52:12 dallas FaxGetty[18538]: --> [2:OK]
Oct 11 07:52:12 dallas FaxGetty[18538]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
Oct 11 07:52:12 dallas FaxGetty[18538]: --> [2:OK]
Oct 11 07:52:12 dallas FaxGetty[18538]: MODEM ROCKWELL AC/V34/V1.617-V34_DS
Oct 11 07:52:12 dallas FaxGetty[18538]: <-- [5:ATM0\r]
Oct 11 07:52:12 dallas FaxGetty[18538]: --> [2:OK]
Oct 11 07:52:12 dallas FaxGetty[18538]: <-- [9:AT+FCR=1\r]
Oct 11 07:52:13 dallas FaxGetty[18538]: --> [2:OK]
Oct 11 07:52:13 dallas FaxGetty[18538]: <-- [27:AT+FLID="Inter/Changes
BV"\r]
Oct 11 07:52:13 dallas FaxGetty[18538]: --> [2:OK]
Oct 11 07:52:13 dallas FaxGetty[18538]: <-- [9:AT+FAA=1\r]
Oct 11 07:52:13 dallas FaxGetty[18538]: --> [2:OK]
Oct 11 07:52:13 dallas FaxGetty[18538]: MODEM input buffering disabled


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null

Prev by Date: [hylafax-users] Coverpage reports double number of pages for WHFC 1.0.8 faxing a 'ps' file created by a2ps
Next by Date: [hylafax-users] faxmail MapHeader Variable: how to use it?
Prev by thread: Re: [hylafax-users] Coverpage reports double number of pages for WHFC 1.0.8 faxing a 'ps' file created by a2ps
Next by thread: Re: [hylafax-users] Error after receiving fax ok
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services