[hylafax-users] Recv Fax Errors..EOL after 5 sec

[Manish Ved <manishv@ho.isl.com>]

Sep 28 15:59:46 blaz FaxGetty[791]: MODEM GVC ROCKWELL 288DPI/KB3426-04
Sep 28 16:01:58 blaz FaxGetty[791]: CAUGHT SIGNAL 15
Sep 28 16:01:58 blaz FaxGetty[791]: CLOSE /dev/ttyS0
Sep 28 16:05:00 blaz FaxGetty[847]: OPEN /dev/ttyS0
Sep 28 16:05:06 blaz FaxGetty[847]: MODEM GVC ROCKWELL 288DPI/KB3426-04
Sep 28 16:05:14 blaz FaxGetty[847]: ANSWER: FAX CONNECTION
Sep 28 16:06:29 blaz FaxGetty[847]: RECV FAX (00000005): recvq/fax00003.tif fromSep 28 16:06:29 blaz FaxGetty[847]: RECV FAX (00000005): session with KJUNNY terSep 28 16:06:29 blaz FaxGetty[847]: RECV FAX: bin/faxrcvd "recvq/fax00003.tif" "

AND ALSO...

I get a messg that the fax could not be received cuz EOL timedout after 5 sec.
The fax on the other side of the m/c takes the entire pg and says TRANSMISSION ERROR and in log i receive thgis messg.

THE VAR?LOG looks like this

Sep 28 17:58:47.04: [ 2527]: SESSION BEGIN 00000008 910228262636
Sep 28 17:58:47.04: [ 2527]: <-- [4:ATA\r]
Sep 28 17:58:54.91: [ 2527]: --> [5:+FCON]
Sep 28 17:58:54.91: [ 2527]: ANSWER: FAX CONNECTION
Sep 28 17:58:54.92: [ 2527]: RECV FAX: begin
Sep 28 17:58:56.91: [ 2527]: --> [29:+FTSI: "      91 22 8262645 "]
Sep 28 17:58:56.91: [ 2527]: REMOTE TSI "91 22 8262645"
Sep 28 17:58:56.91: [ 2527]: --> [22:+FDCS: 0,5,0,2,0,0,0,0]
Sep 28 17:58:56.91: [ 2527]: REMOTE wants 14400 bit/s
Sep 28 17:58:56.91: [ 2527]: REMOTE wants page width 1728 pixels in 215 mm
Sep 28 17:58:56.91: [ 2527]: REMOTE wants unlimited page length
Sep 28 17:58:56.91: [ 2527]: REMOTE wants 3.85 line/mm
Sep 28 17:58:56.91: [ 2527]: REMOTE wants 1-D MR
Sep 28 17:59:00.28: [ 2527]: --> [2:OK]
Sep 28 17:59:00.28: [ 2527]: <-- [7:AT+FDR\r]
Sep 28 17:59:01.93: [ 2527]: --> [5:+FCFR]
Sep 28 17:59:01.93: [ 2527]: --> [22:+FDCS: 0,5,0,2,0,0,0,0]
Sep 28 17:59:01.93: [ 2527]: REMOTE wants 14400 bit/s
Sep 28 17:59:01.93: [ 2527]: REMOTE wants page width 1728 pixels in 215 mm
Sep 28 17:59:01.93: [ 2527]: REMOTE wants unlimited page length
Sep 28 17:59:01.93: [ 2527]: REMOTE wants 3.85 line/mm
Sep 28 17:59:01.93: [ 2527]: REMOTE wants 1-D MR
Sep 28 17:59:02.50: [ 2527]: --> [7:CONNECT]
Sep 28 17:59:02.50: [ 2527]: RECV: begin page
Sep 28 17:59:02.50: [ 2527]: RECV: send trigger 021
Sep 28 17:59:02.50: [ 2527]: <-- data [1]
Sep 28 18:00:10.39: [ 2527]: <-- data [1]
Sep 28 18:00:10.39: [ 2527]: RECV: Missing EOL after 5 seconds
Sep 28 18:00:10.39: [ 2527]: REMOTE HANGUP: Missing EOL after 5 seconds (sectionSep 28 18:00:10.39: [ 2527]: RECV FAX (00000008): recvq/fax00004.tif from 91 22
Sep 28 18:00:10.42: [ 2527]: RECV FAX: Missing EOL after 5 seconds (section 3.2/Sep 28 18:00:10.42: [ 2527]: <-- [6:AT+FK\r]
Sep 28 18:00:10.53: [ 2527]: --> [2:OK]
Sep 28 18:00:10.53: [ 2527]: RECV FAX (00000008): session with 91 22 8262645 terSep 28 18:00:10.53: [ 2527]: RECV FAX: bin/faxrcvd "recvq/fax00004.tif" "ttyS0"
Sep 28 18:00:10.68: [ 2527]: RECV FAX: end
Sep 28 18:00:10.68: [ 2527]: SESSION END


Pls heeeeellllpppp
Thanx in advance 
Regards,
Manish


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null