[hylafax-users] problems receiving fax

[Magnus Hagdorn <magi@rses.anu.edu.au>]

cheers for the prompt replies
i guess i should also tell you which version of hyla fax i use:
4.1beta2 as supplied with suse 6.3
the comm log is

Sep 29 13:56:08.92: [ 1510]: SESSION BEGIN 00000010 49794059501
Sep 29 13:56:08.92: [ 1510]: <-- [4:ATA\r]
Sep 29 13:56:17.27: [ 1510]: --> [5:+FCON]
Sep 29 13:56:17.27: [ 1510]: MODEM set baud rate: 19200 baud (flow control unchanged)
Sep 29 13:56:17.27: [ 1510]: MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF
Sep 29 13:56:17.27: [ 1510]: ANSWER: FAX CONNECTION
Sep 29 13:56:17.27: [ 1510]: MODEM input buffering enabled
Sep 29 13:56:17.30: [ 1510]: RECV FAX: begin
Sep 29 13:56:18.91: [ 1510]: --> [29:+FTSI: "    +49 07947 940341"]
Sep 29 13:56:18.91: [ 1510]: REMOTE TSI "+49 07947 940341"
Sep 29 13:56:19.24: [ 1510]: --> [22:+FDCS: 0,3,0,2,1,0,0,3]
Sep 29 13:56:19.24: [ 1510]: REMOTE wants 9600 bit/s
Sep 29 13:56:19.24: [ 1510]: REMOTE wants page width 1728 pixels in 215 mm
Sep 29 13:56:19.24: [ 1510]: REMOTE wants unlimited page length 
Sep 29 13:56:19.24: [ 1510]: REMOTE wants 3.85 line/mm
Sep 29 13:56:19.24: [ 1510]: REMOTE wants 2-D MR
Sep 29 13:56:19.35: [ 1510]: --> [2:OK]
Sep 29 13:56:19.35: [ 1510]: <-- [7:AT+FDR\r]
Sep 29 13:56:24.32: [ 1510]: --> [29:+FTSI: "    +49 07947 940341"]
Sep 29 13:56:24.32: [ 1510]: REMOTE TSI "+49 07947 940341"
Sep 29 13:56:26.37: [ 1510]: --> [5:+FCFR]
Sep 29 13:56:28.40: [ 1510]: --> [22:+FDCS: 0,2,0,2,1,0,0,3]
Sep 29 13:56:28.40: [ 1510]: REMOTE wants 7200 bit/s
Sep 29 13:56:28.40: [ 1510]: REMOTE wants page width 1728 pixels in 215 mm
Sep 29 13:56:28.40: [ 1510]: REMOTE wants unlimited page length 
Sep 29 13:56:28.40: [ 1510]: REMOTE wants 3.85 line/mm
Sep 29 13:56:28.40: [ 1510]: REMOTE wants 2-D MR
Sep 29 13:56:28.40: [ 1510]: --> [7:CONNECT]
Sep 29 13:56:28.40: [ 1510]: RECV: begin page
Sep 29 13:56:28.40: [ 1510]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 29 13:56:28.40: [ 1510]: RECV: send trigger 022
Sep 29 13:56:28.40: [ 1510]: <-- data [1]
Sep 29 13:56:47.66: [ 1510]: RECV: 599 total lines, 0 bad lines, 0 consecutive bad lines
Sep 29 13:56:47.66: [ 1510]: MODEM set XON/XOFF/DRAIN: input interpreted, output disabled
Sep 29 13:56:47.66: [ 1510]: --> [17:+FPTS: 2,2219,0,0]
Sep 29 13:56:48.89: [ 1510]: --> [7:+FET: 2]
Sep 29 13:56:48.89: [ 1510]: RECV recv EOP (no more pages or documents)
Sep 29 13:56:49.00: [ 1510]: --> [2:OK]
Sep 29 13:56:49.00: [ 1510]: RECV send MCF (message confirmation)
Sep 29 13:56:49.00: [ 1510]: RECV FAX (00000010): from +49 07947 940341, page 1 in 0:30, INF, 3.85 line/mm, 2-D MR
Sep 29 13:56:49.00: [ 1510]: RECV FAX (00000010): recvq/fax00002.tif from +49 07947 940341, route to <unspecified>, 1 pages in 0:32
Sep 29 13:56:49.00: [ 1510]: <-- [7:AT+FDR\r]
Sep 29 13:56:51.77: [ 1510]: --> [8:+FHNG: 0]
Sep 29 13:56:51.77: [ 1510]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Sep 29 13:56:51.79: [ 1510]: RECV FAX: bin/faxrcvd "recvq/fax00002.tif" "ttyS1" "00000010" ""
Sep 29 13:56:53.14: [ 1510]: RECV FAX: end
Sep 29 13:56:53.14: [ 1510]: SESSION END

cheers again
magi

-- 
Magnus Hagdorn                      Tel: + 61 2 6249 5511                
Research School of Earth Sciences   Fax: + 61 2 6249 5443   
Australian National University          
Canberra ACT 0200, Australia        email: magi@rses.anu.edu.au




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null