[hylafax-users] Fw: Canon L770 Fax Machine problem

["GaoQiang(163)" <gaoqiang@163.net>]

> Hi All
> 
> I installed HylaFAX v4.1beta2 under Linux RedHat 6.0 with modem Rockwell  AC/K56/v2.210-k56_2M_DI as Class 2 config.
> It seems worked very well in the past week, only it can not received fax from a remote site with Canon L770 fax machine. below is log:
> Sep 27 21:59:44.53: [  790]: SESSION BEGIN 00000219 001000000
> Sep 27 21:59:44.54: [  790]: <-- [4:ATA\r]
> Sep 27 21:59:54.99: [  790]: --> [5:+FCON]
> Sep 27 21:59:54.99: [  790]: ANSWER: FAX CONNECTION
> Sep 27 21:59:54.99: [  790]: RECV FAX: begin
> Sep 27 22:00:20.17: [  790]: --> [29:+FTSI: "      +001   000000"]
> Sep 27 22:00:20.17: [  790]: REMOTE TSI "+001   000000"
> Sep 27 22:00:20.62: [  790]: --> [22:+FDCS: 0,3,0,2,0,0,0,0]
> Sep 27 22:00:20.62: [  790]: REMOTE wants 9600 bit/s
> Sep 27 22:00:20.62: [  790]: REMOTE wants page width 1728 pixels in 215 mm
> Sep 27 22:00:20.62: [  790]: REMOTE wants unlimited page length 
> Sep 27 22:00:20.62: [  790]: REMOTE wants 3.85 line/mm
> Sep 27 22:00:20.62: [  790]: REMOTE wants 1-D MR
> Sep 27 22:00:20.62: [  790]: --> [2:OK]
> Sep 27 22:00:20.62: [  790]: <-- [7:AT+FDR\r]
> Sep 27 22:00:22.15: [  790]: --> [5:+FCFR]
> Sep 27 22:00:35.94: [  790]: --> [10:+FHNG: 101]
> Sep 27 22:00:35.94: [  790]: REMOTE HANGUP: RSPREC invalid response received (code 101)
> Sep 27 22:00:35.94: [  790]: RECV FAX (00000219): recvq/fax00160.tif from +001   000000, route to <unspecified>, 0 pages in 0:41
> Sep 27 22:00:35.94: [  790]: RECV FAX: RSPREC invalid response received
> Sep 27 22:00:35.95: [  790]: RECV FAX (00000219): session with +001   000000 terminated abnormally: RSPREC invalid response received
> Sep 27 22:00:35.95: [  790]: RECV FAX: bin/faxrcvd "recvq/fax00160.tif" "ttyS0" "00000219" "RSPREC invalid response received"
> Sep 27 22:00:39.47: [  790]: RECV FAX: end
> Sep 27 22:00:39.47: [  790]: SESSION END  
> 
> and I compared with succedly received fax log from other fax machine the difference is:
> 
> Sep 29 14:27:02.52: [  482]: --> [2:OK]
> Sep 29 14:27:02.52: [  482]: <-- [7:AT+FDR\r]
> Sep 29 14:27:04.05: [  482]: --> [5:+FCFR]
> Sep 29 14:27:07.01: [  482]: --> [22:+FDCS: 0,3,0,2,0,0,0,5]
> Sep 29 14:27:07.01: [  482]: REMOTE wants 9600 bit/s
> Sep 29 14:27:07.01: [  482]: REMOTE wants page width 1728 pixels in 215 mm
> Sep 29 14:27:07.01: [  482]: REMOTE wants unlimited page length 
> Sep 29 14:27:07.01: [  482]: REMOTE wants 3.85 line/mm
> Sep 29 14:27:07.01: [  482]: REMOTE wants 1-D MR
> Sep 29 14:27:07.01: [  482]: --> [7:CONNECT]
> 
> then continue to receive. but for Canon L770 will be:
> 
> Sep 27 22:00:20.62: [  790]: --> [2:OK]
> Sep 27 22:00:20.62: [  790]: <-- [7:AT+FDR\r]
> Sep 27 22:00:22.15: [  790]: --> [5:+FCFR]
> Sep 27 22:00:35.94: [  790]: --> [10:+FHNG: 101]
> Sep 27 22:00:35.94: [  790]: REMOTE HANGUP: RSPREC invalid response received (code 101)
> Sep 27 22:00:35.94: [  790]: RECV FAX (00000219): recvq/fax00160.tif from +001   000000, route to unspecified
> 
> Any help will be highly appreciated.
> 
> Frank Gao
> 
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ)Zÿ¶oÔ±êì1¨¥ŠxŠËÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿôèº{.oùšŠ_ìº{.nÇ+‰·¡ÊVŸkî±êìþ·ª¹ë-þ¥iö±þŠàÿ÷^¿ùî