Re: [hylafax-users] SOLUTION: FW: Howto enforce Hylafax to correctly encode incoming faxes?

["Bernd Proissl" <lists@proissl.de>]

> -----Original Message-----
> From: hylafax-users-bounce@hylafax.org
> [mailto:hylafax-users-bounce@hylafax.org]On Behalf Of Dmitry Bely
> Sent: Monday, September 25, 2000 10:37 PM
> To: lists@proissl.de
> Cc: hylafax-users@hylafax.org
> Subject: Re: [hylafax-users] FW: Howto enforce Hylafax to correctly
> encode incoming faxes?
>
>
> "Bernd Proissl" <lists@proissl.de> writes:
>
> > > > > I cannot force Hylafax to correctly encode incoming faxes.
> > > > > I follow the instructions of Dmitry:
> > > > >
> > > > > http://www.hylafax.org/archive/2000-08/msg00081.html
> > > > >
> > > > > which says add
> > > > >
> > > > > Class2CQQueryCmd:       "!(0),(0)"
> > > > > RecvDataFormat:         "2-D MMR"
> > > > >
> > > > > to your config file but this does not change anything here.
> > > >
> > > > Very strange.
> > > >
> > > > > The log is:
> > > >
> > > > Can you show your modem init log from /var/log/daemon.log?
> > > > ServerTracing=0xFFF is desireable.
> > > >
> > > Sep 25 15:17:00 linux1 FaxGetty[29666]: OPEN /dev/ttyS0
>
> [...]
>
> > > Sep 25 15:17:06 linux1 FaxGetty[29666]: <-- [9:AT+FCQ=?\r]
> > > Sep 25 15:17:06 linux1 FaxGetty[29666]: --> [11:(0-2),(0-2)]
> > > Sep 25 15:17:06 linux1 FaxGetty[29666]: --> [2:OK]
> > > Sep 25 15:17:06 linux1 FaxGetty[29666]: MODEM Supports 1D+2D
> copy quality
> > > checking (but not enabled)
>
> Hmm, this shows that Hylafax uses Class2CQQueryCmd == "AT+FCQ=?". Are you
> absolutely sure that you have
>
> Class2CQQueryCmd:       "!(0),(0)"
>
> in your config? Maybe it is specified twice (differently)? Maybe
> there is a
> typo?
Class2CQQueryCmd:       "!(0),(0)" was specified twice (the second one was
empty ""),
i removed the second definition and i also had to remove
Class2CQQueryCmd:      AT+FCQ=?

no i get
Sep 26 07:53:46 linux1 FaxGetty[2349]: MODEM Supports no copy quality
checking

and correctly encoded tiff-files.

Thanks, Dmitry!


> Hope to hear from you soon,
> Dmitry
>
>
>
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org
> < /dev/null
>



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null