[hylafax-users] ModemResetAtTheEndOfTheSessionCmds or similar

[Giulio Orsero <giulioo@tiscalinet.it>]

cvs20000823, 
Modem class1:
	TP560 Data/Fax/Voice 56K Modem
	DSP Ver1.10 CheckSum=7962
no faxgetty

I have a modem that need to be left with E1S0=2 (these settings are
reset whenever we issue ATZ).

HylaFAX sets it up with E0S0=0.
AT&D3 does not cause the modem to be reset to E1S0=2.

The sessions succesfully end with
Aug 31 19:29:53.61: [ 3468]: --> [2:OK]
Aug 31 19:29:53.61: [ 3468]: <-- [14:AT+FCLASS=0H0\r]
Aug 31 19:29:54.04: [ 3468]: --> [10:NO CARRIER]
Aug 31 19:29:54.04: [ 3468]: MODEM No carrier
Aug 31 19:29:54.04: [ 3468]: SESSION END

and the modem is left E0S0=0 after a fax is sent.

Don't want to use mgetty to reset it.

It seems  HylaFAX  does not provide a way to do a reset at the end of a
session (something like ModemResetAtTheEndOfTheSessionCmds), is this
true?

I tried playing with ModemOnHookCmd, but it seems this is also used at
the start of the session, so that setting E1 there causes the modem init
to fails because HylaFAX is confused by the echo.

Any suggestion?

Thanks.

-- 
giulioo@pobox.com


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null