|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] SEND FAILED: Ring detect without successful handshake
I searched the mailing list and couldn't find this error occuring when
someone was sending... any ideas?
Receiving the following error when sending...
Aug 27 20:34:25 faxserver1 FaxSend[1628]: SEND FAILED: Ring detect without
successful handshake
Whats actually happening is that a human is answering the phone.
Modem is a PCI-RAS chaser 8 card with rockwell chipset.
config file in use...
# Uncomment to Reserve ttyCH2 for incoming only
#ModemGroup: "any: ttyCH[0,1,3]"
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class2 # use class 2 interface
ModemRate: 19200
#ModemFlowControl: rtscts # default
ModemFlowControl: xonxoff # default
#
#ModemResetCmds: AT&F2 # what you want for a Supra
ModemNoFlowCmd: AT&K # disable flow control cmd
ModemHardFlowCmd: AT&K3 # hardware flow control cmd
ModemSoftFlowCmd: AT&K4 # software flow control cmd
ModemSetupDTRCmd: AT&D3 # DTR off causes modem to reset
#ModemSetupDTRCmd: AT&D2S25=1S38=0 # Dynalink 1414VE needs this
ModemSetupDCDCmd: AT&C1 # DCD follows carrier
ModemSetupAACmd: AT+FAA=1+FCLASS=0 # enable in current class
#
ModemSendFillOrder: LSB2MSB # as expected
ModemRecvFillOrder: MSB2LSB # opposite of what makes sense
#
ModemAnswerFaxBeginCmd: "<19200><xon>" # modem switches on fax receive
#
# Caller ID configuration setup for Supra.
#
#QualifyCID: etc/cid # CID access control list file
#CIDNumber: "NMBR = " # pattern string for phone number
info
#CIDName: "NAME = " # pattern string for identity info
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
