Re: [hylafax-users] receive fax and get it as e-mail

["Keith G. Murphy" <keithmur@mindspring.com>]

Chris Staudt wrote:
> 
> hi all, i got an running hylafax server.
> now i want to receive my incoming faxes as an e-mail with a tiff
> attachment.
> can anybady help me?
> 
This one does the trick for me.  Note that I cheat and use
mime-construct, which in turn depends on Perl.

Hope no one minds my posting this attachment; thought it might be of
general use.
#! /bin/sh
#	$Id: faxrcvd,v 1.2 1998/03/05 23:27:32 behanw Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics
# 
# Permission to use, copy, modify, distribute, and sell this software and 
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
# 
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
# 
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
# OF THIS SOFTWARE.
#

#
# Modifications by: Behan Webster <behanw@pobox.com>
#

#
# faxrcvd file devID commID error-msg
#
if [ $# != 4 ]; then
    echo "Usage: $0 file devID commID error-msg"
    exit 1
fi

test -f etc/setup.cache || {
    SPOOL=`pwd`
    cat<<EOF

FATAL ERROR: $SPOOL/etc/setup.cache is missing!

The file $SPOOL/etc/setup.cache is not present.  This
probably means the machine has not been setup using the faxsetup(1M)
command.  Read the documentation on setting up HylaFAX before you
startup a server system.

EOF
    exit 1
}
. etc/setup.cache

INFO=$SBIN/faxinfo
FAX2PS=$TIFFBIN/fax2ps

#SENDFROM=hylafax
#TOADDR=FaxMaster
SENDFROM=fax@charles-retina.com
TOADDR=keithmur@mindspring.com

#
# There is no good portable way to find out the fully qualified
# domain name (FQDN) of the host or the TCP port for the hylafax
# service so we fudge here.  Folks may want to tailor this to
# their needs; e.g. add a domain or use localhost so the loopback
# interface is used.
#
HOSTNAME=`hostname`			# XXX no good way to find FQDN
PORT=4559				# XXX no good way to lookup service

###########################################################################
# Send email about fax
#
function emailfax () {
	TO=$1
	FROM=$2
	NUM=$3
	FAX=$4
	DEV=$5
	LOG=$6
	ERR=$7
	SENT=$8

	(MIMEBOUNDARY="NextPart$$"
	 echo "Mime-Version: 1.0"
	 echo "Content-Type: Multipart/Mixed; Boundary=\"$MIMEBOUNDARY\""
	 echo "Content-Transfer-Encoding: 7bit"
	echo "To: $TO"
	echo "From: The HylaFAX Receive Agent <$FROM>"
	echo "Subject: facsimile received from $NUM";
	 echo ""
	 echo "--$MIMEBOUNDARY"
	echo "Content-Type: text/plain"
	echo "Content-Description: FAX info"
	 echo "Content-Transfer-Encoding: 7bit"
	 echo ""
    echo "File on host is: $FILE:"; $INFO -n $FAX
	#echo "$FILE (ftp://$HOSTNAME:$PORT/$FAX):"; $INFO -n $FAX
	echo "ReceivedOn: $DEV"
	if [ "$ERR" ]; then
	    echo ""
	    echo "The full document was not received because:"
	    echo ""
		echo "    $ERR"
	    echo ""
	    echo "    ---- Transcript of session follows ----"
	    echo ""
	    if [ -f log/c$COMMID ]; then
		$SED -e '/-- data/d' \
		     -e '/start.*timer/d' -e '/stop.*timer/d' \
			log/c$LOG
		elif [ -n "$LOG" ]; then
		echo "    No transcript available (CommID c$LOG)."
	    else
		echo "    No transcript available."
	    fi
	 else
		#echo "CommID:     c$LOG (ftp://$HOSTNAME:$PORT/log/c$LOG)"
        echo "CommID: c$LOG"
	 fi
	if [ -n "$SENT" ]; then
		echo ""
		echo "The facsimile was automatically dispatched to: $SENT." 
	fi
	echo ""
	 echo ""
     echo "--$MIMEBOUNDARY"
     echo "Content-Type: image/tiff"
     echo "Content-Description: FAX document as TIF"
     mime-construct --subpart --file $FAX
	 echo "--$MIMEBOUNDARY"
	 echo "Content-Type: application/postscript"
	 echo "Content-Description: FAX document as Postscript"
	 echo "Content-Transfer-Encoding: 7bit"
	 echo ""
	$FAX2PS $FAX 2>/dev/null
	 echo "--$MIMEBOUNDARY"
     echo "Content-Type: text/plain"
     echo "Content-Description: Reception log"
     echo "Content-Transfer-Encoding: 7bit"
     echo ""
     echo "Here follows the reception log:"
     echo ""
     cat log/c$LOG
     echo "--$MIMEBOUNDARY--"
	) | 2>&1 $SENDMAIL -f$FROM -oi $TO
}
###########################################################################


FILE="$1"
DEVICE="$2"
COMMID="$3"
MSG="$4"

if [ -f $FILE ]; then
	#
	# Check the sender's TSI and setup to dispatch
	# facsimile received from well-known senders.
	#
	SENDER="`$INFO $FILE | $AWK -F: '/Sender/ { print $2 }' 2>/dev/null`"

	SENDTO=
	if [ -f etc/FaxDispatch ]; then
		. etc/FaxDispatch	# NB: FaxDispatch sets SENDTO based on $SENDER
	fi

	if [ -n "$TOADDR" ]; then
		emailfax "$TOADDR" "$SENDFROM" "$SENDER" "$FILE" "$DEVICE" "$COMMID" "$MSG" "$SENDTO"
    fi

	if [ -n "$SENDTO" ]; then
		emailfax "$SENDTO" "$SENDFROM" "$SENDER" "$FILE" "$DEVICE" "$COMMID" "$MSG"
	fi

else
    #
    # Generate notification mail for a failed attempt.
    #
    (echo "To: $TOADDR"
	 echo "From: The HylaFAX Receive Agent <$FROM>"
     echo "Subject: facsimile not received"
     echo ""
     echo "An attempt to receive facsimile on $DEVICE failed because:"
     echo ""
     echo "    $MSG"
     echo ""
     echo "    ---- Transcript of session follows ----"
     echo ""
     if [ -f log/c$COMMID ]; then
	$SED -e '/-- data/d' \
	     -e '/start.*timer/d' -e '/stop.*timer/d' \
	    log/c$COMMID
     elif [ -n "$COMMID" ]; then
	echo "    No transcript available (CommID c$COMMID)."
     else
	echo "    No transcript available."
     fi
	) | 2>&1 $SENDMAIL -f$FROM -oi $TOADDR
fi