|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Receive Fax problems
Hi folks,
sorry if this is a FAQ,but I have looked there and in the help and can't
seem to see an answer.
I have just setup Hylafax on my Linux RH6.2 box and it all went together
very easily (I should have known better)...
I just tried to receive a trial fax and I got the modem to answer, make the
tiff file, and all looked good, however, the client sent the fax, and hung
up, but my end stayed open and infact still says that its receiving the fax
(not received)..
It doesn't look like there is anything in the tiff file either.
The log file is as follows... (numbers changed to protect the innocent..)
Thanks Peter
Aug 21 10:11:14.54: [ 7477]: SESSION BEGIN 00000003 613xxxxxxxxx
Aug 21 10:11:14.54: [ 7477]: <-- [4:ATA\r]
Aug 21 10:11:20.65: [ 7477]: --> [7:CONNECT]
Aug 21 10:11:20.65: [ 7477]: ANSWER: FAX CONNECTION
Aug 21 10:11:20.65: [ 7477]: RECV FAX: begin
Aug 21 10:11:20.65: [ 7477]: <-- data [23]
Aug 21 10:11:20.65: [ 7477]: <-- data [2]
Aug 21 10:11:22.33: [ 7477]: --> [7:CONNECT]
Aug 21 10:11:22.33: [ 7477]: <-- data [10]
Aug 21 10:11:22.33: [ 7477]: <-- data [2]
Aug 21 10:11:22.88: [ 7477]: --> [2:OK]
Aug 21 10:11:22.88: [ 7477]: <-- [9:AT+FRH=3\r]
Aug 21 10:11:25.98: [ 7477]: --> [0:]
Aug 21 10:11:25.98: [ 7477]: MODEM <Empty line>
Aug 21 10:11:25.98: [ 7477]: <-- data [1]
Aug 21 10:11:26.03: [ 7477]: --> [2:OK]
Aug 21 10:11:26.03: [ 7477]: DELAY 1500 ms
Aug 21 10:11:27.53: [ 7477]: <-- [9:AT+FTH=3\r]
Aug 21 10:11:27.58: [ 7477]: --> [7:CONNECT]
Aug 21 10:11:27.58: [ 7477]: <-- data [23]
Aug 21 10:11:27.58: [ 7477]: <-- data [2]
Aug 21 10:11:29.37: [ 7477]: --> [7:CONNECT]
Aug 21 10:11:29.37: [ 7477]: <-- data [10]
Aug 21 10:11:29.37: [ 7477]: <-- data [2]
Aug 21 10:11:29.91: [ 7477]: --> [2:OK]
Aug 21 10:11:29.91: [ 7477]: <-- [9:AT+FRH=3\r]
Aug 21 10:11:30.30: [ 7477]: --> [7:CONNECT]
Aug 21 10:11:31.70: [ 7477]: --> [2:OK]
Aug 21 10:11:31.70: [ 7477]: REMOTE TSI "61 3 9xxx xxxx"
Aug 21 10:11:31.70: [ 7477]: <-- [9:AT+FRH=3\r]
Aug 21 10:11:31.72: [ 7477]: --> [7:CONNECT]
Aug 21 10:11:31.96: [ 7477]: --> [2:OK]
Aug 21 10:11:31.96: [ 7477]: REMOTE wants 14400 bit/s
Aug 21 10:11:31.96: [ 7477]: REMOTE wants page width 1728 pixels in 215 mm
Aug 21 10:11:31.96: [ 7477]: REMOTE wants unlimited page length
Aug 21 10:11:31.96: [ 7477]: REMOTE wants 7.7 line/mm
Aug 21 10:11:31.96: [ 7477]: REMOTE wants 2-D MR
Aug 21 10:11:31.96: [ 7477]: RECV training at v.17 14400 bit/s
Aug 21 10:11:31.96: [ 7477]: <-- [11:AT+FRM=145\r]
Aug 21 10:11:33.64: [ 7477]: --> [7:CONNECT]
Aug 21 10:11:35.19: [ 7477]: RECV: TCF 2751 bytes, 1% non-zero, 2704
zero-run
Aug 21 10:11:35.19: [ 7477]: --> [10:NO CARRIER]
Aug 21 10:11:35.19: [ 7477]: DELAY 75 ms
Aug 21 10:11:35.27: [ 7477]: <-- [9:AT+FTH=3\r]
Aug 21 10:11:35.32: [ 7477]: --> [7:CONNECT]
Aug 21 10:11:35.32: [ 7477]: <-- data [3]
Aug 21 10:11:35.32: [ 7477]: <-- data [2]
Aug 21 10:11:36.64: [ 7477]: --> [2:OK]
Aug 21 10:11:36.64: [ 7477]: TRAINING succeeded
Aug 21 10:11:36.64: [ 7477]: <-- [11:AT+FRM=146\r]
Aug 21 10:11:37.22: [ 7477]: --> [7:CONNECT]
Aug 21 10:11:37.22: [ 7477]: RECV: begin page
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
